GB/T 6480-2015 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6480-2015: Carbide detachable bit for rock drilling Status: Valid GB/T 6480: Historical versions
Basic dataStandard ID: GB/T 6480-2015 (GB/T6480-2015)Description (Translated English): Carbide detachable bit for rock drilling Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H44 Classification of International Standard: 77.140.60 Word Count Estimation: 11,188 Date of Issue: 2015-09-11 Date of Implementation: 2016-06-01 Older Standard (superseded by this standard): GB/T 6480-2002 Quoted Standard: GB/T 2527; YS/T 296 Regulation (derived from): National Standard Announcement 2015 No.25 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the carbide drill head specifications, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This Standard applies to drilling with a diameter of 28 mm ~ 152 mm carbide drill bits. GB/T 6480-2015: Carbide detachable bit for rock drilling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Drilling with carbide drill bits) ICS 77.140.60 H44 National Standards of People's Republic of China Replacing GB/T 6480-2002 Drilling with carbide drill bits Issued on. 2015-09-11 2016-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 6480-2002 "Drilling with carbide drill bit", compared with the GB/T 6480-2002, the main technical change as follows. --- Expanding the diameter range; --- Modify the "ball gear" codenamed "pillar teeth", the code is changed from "Q" to "Z"; --- Increased composite drill head of the corresponding requirements; --- Increase R32 metric thread, thread code thread Rm in the waveform; increase and double trapezoidal thread trapezoidal thread connecting with solder head-related content. The standard proposed by China Iron and Steel Association. This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized. This standard was drafted. Shougang Guiyang Special Steel Co., Ltd., Metallurgical Industry Information Standards Institute, Steel Research Institute. The main drafters of this standard. Xiongjia Ze, Yang Yun, Liu gem, ZHANG Chun-hong, Wang Chou-seng, Dong Xin, Wang Yujie Ding Lian, Cheng Jinyang, Xu Bin. This standard replaces the standards previously issued as follows. --- GB/T 6480-1986, GB/T 6480-1994, GB/T 6480-2002. Drilling with carbide drill bits1 ScopeThis standard specifies the carbide drill head specifications, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to drilling with a diameter of 28mm ~ 152mm carbide drill bits.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2527 mining, oil drill with carbide teeth YS/T 296 drilling tools with carbide products3 order contentsAccording to the standard order contract or order should include the following. a) the standard number; b) the product name; c) alloy grades; d) specification model; e) the number; f) Special requirements.4 Specifications Model4.1 drill head models 4.1.1 presentation rules Specifications Model drill head by a type code, drill bit diameter, main dimensions, connection type and the type of pants code components. Note. The connection cone drill head main dimensions using taper (taper after a decimal point, a decimal point) and cone large end diameter (cone diameter big end by rounding After the 500 into law a decimal point). Main dimensions Threaded drill head threaded nominal diameter. 4.1.2 Types drill head 4.1.2.1 drill head according to the head of different types can be divided into tabular type (in-line, three blade-shaped, cross-shaped, X-shaped), column tooth (according to the head level Surface shape can be divided into. planar column gear, column-shaped concave tooth and tooth crown shaped columns) and compound. Typical examples of the graphic shown in Figure 1 to 8. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6480-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 6480-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6480-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6480-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6480-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6480-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |