GB/T 6022-2008 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6022-2008: Butadiene for industrial use -- Determination of oxygen in gaseous phase above liquid butadiene Status: Valid GB/T 6022: Historical versions
Basic dataStandard ID: GB/T 6022-2008 (GB/T6022-2008)Description (Translated English): Butadiene for industrial use -- Determination of oxygen in gaseous phase above liquid butadiene Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G15 Classification of International Standard: 71.080.10 Word Count Estimation: 8,886 Date of Issue: 2008-06-19 Date of Implementation: 2009-02-01 Older Standard (superseded by this standard): GB/T 6022-1999 Quoted Standard: GB/T 3723; GB/T 6681; GB/T 8170 Regulation (derived from): National Standard Approval Announcement 2008 No.10 (Total No.123) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of butadiene for industrial use liquid oxygen content in the gas phase by gas chromatography and thin-film electrochemical battery cover. Gas Chromatography range of 100 mL/m3 ~ 5 000 mL/m3, mulch battery electrochemical measurement range 1 mL/m3 ~ 5 000 mL/m3. This standard does not explain all of the safety issues associated with the use. Therefore, the user has the responsibility to take appropriate safety and health practices to ensure compliance with the relevant national regulations. GB/T 6022-2008: Butadiene for industrial use -- Determination of oxygen in gaseous phase above liquid butadiene---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Butadiene for industrial use. Determination of oxygen in gaseous phase above liquid butadiene ICS 71.080.10 G15 National Standards of People's Republic of China Replacing GB/T 6022-1999 Industrial liquid butadiene gas phase oxygen measurement Posted 2008-06-19 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 6022-1999 "on the industrial use of liquid oxygen in the gas phase butadiene was determined by gas chromatography." This standard and GB/T 6022-1999 compared to the main changes are as follows. --- The name was changed to "industrial use - Determination of butadiene vapor liquid oxygen"; --- Increasing the film covering the battery with electrochemical measuring liquid butadiene gas phase oxygen content; --- Increasing the flow chart 3.5.2 Gas Chromatography; It changed to 25 ℃ ~ 50 ℃ --- 3.5.3 in the column temperature increased from 15 ℃ ~ 25 ℃; --- Emboldened original standard gas to argon, nitrogen or argon; Sampling methods --- butadiene was revised to gaseous oxygen method GB/T 6681 stipulated. The standard proposed by China Petroleum and Chemical Corporation. This standard by the National Standardization Technical Committee Petrochemical Chemical Technical Committee (SAC/TC63/SC4) centralized. This standard drafting units. China Sinopec Yangzi Petrochemical Company Limited. The main drafters of this standard. SHI Chun Bao, Lu Haiping. This standard replaces the previous standard release case. GB/T 6022-1999. Industrial liquid butadiene gas phase oxygen measurement1 Scope1.1 standard specifies the determination of industrial liquid butadiene gas phase oxygen content by gas chromatography and thin film covering the battery electrochemistry, gas Determination of the range of 100mL/m3 ~ 5000mL/m3, covered with a thin film battery with electrochemical measurement range of 1mL/m3 ~ 5000mL/m3. 1.2 This standard does not explain all of the safety issues associated with use. Therefore, the user has the responsibility to take appropriate safety and health measures Facilities, to ensure compliance with the provisions of the relevant national regulations.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3723 Sampling of chemical products for industrial use General Safety (GB/T 3723-1999, idt ISO 3165. 1976) GB/T 6681 General rules for sampling gaseous chemical products GB/T 8170 numerical rounding rules3 Gas Chromatography3.1 Summary of Method Gas sample through the sampling device into the chromatograph, and a carrier gas into the pre-column, the hydrocarbon components are pre-column adsorption, pre-cleaning Separation column, the hydrocarbon components vented. Remaining separated components into the separation column, a detector with a thermal conductivity detector. Because oxygen at ambient temperature and in argon Separation column is not isolated, and therefore the use of argon as a carrier gas, argon in the sample is not generated in response to the thermal conductivity cell. Oxygen peaks obtained surface Compared with the product of the oxygen peak area obtained from the standard sample, thereby determining the oxygen content in the sample. 3.2 Reagents and materials 3.2.1 Carrier gas Argon. purity of not less than 99.99% (volume fraction), the oxygen content of not more than 0.002% (volume fraction), free of organic impurities, water and Second Carbon monoxide. 3.2.2 Preparation of standard sample gas Nitrogen or argon. purity not less than 99.999% (volume fraction), an oxygen content of not more than 2mL/m3. Oxygen. purity of not less than 99.99% (volume fraction). 3.2.3 Standard Series Gas Oxygen. The oxygen content was 50mL/m3 ~ 5000mL/m3, emboldened as nitrogen or argon (3.2.2). 3.2.4 stationary phase Activated carbon (chromatography). diameter of 0.17mm ~ 0.25mm (60 mesh to 80 mesh); 5A molecular sieve (chromatography). diameter of 0.17mm ~ 0.25mm (60 mesh to 80 mesh). 3.3 instruments and equipment 3.3.1 Gas chromatograph. a quantitative gas injection device, cleaning device and a thermal conductivity detector gas chromatograph, the instrument of this standard to Produces a given peak operating conditions is high, at least two times greater than the noise of the instrument. 3.3.2 Quantitative tubes. 1mL or 5mL. 3.3.3 pre-separation column Stationary phase. activated carbon (3.2.4); ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6022-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 6022-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6022-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6022-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6022-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6022-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |