GB/T 5401-2018 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5401-2018: Pulp -- Determination of alkali solubility Status: Valid GB/T 5401: Historical versions
Basic dataStandard ID: GB/T 5401-2018 (GB/T5401-2018)Description (Translated English): Pulp -- Determination of alkali solubility Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y30 Classification of International Standard: 85.010 Word Count Estimation: 14,165 Date of Issue: 2018-12-28 Date of Implementation: 2019-07-01 Older Standard (superseded by this standard): GB/T 5401-2004 Regulation (derived from): National Standard Announcement No. 17 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5401-2018: Pulp -- Determination of alkali solubility---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Pulp--Determination of alkali solubility ICS 85.010 Y30 National Standards of People's Republic of China Replace GB/T 5401-2004 Determination of pulp alkali solubility (ISO 692.1982, MOD) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 5401-2004 "Determination of pulp alkali solubility", and the main changes compared with GB/T 5401-2004 are as follows. --- Revised the scope of the statement (see Chapter 1, Chapter 1 of the.2004 edition); --- Added 4 normative references and adjusted the corresponding standards for moisture content determination (see Chapter 2,.2004 edition) Chapter 2); --- Revised the expression in terms and definitions (see 3.1, 3.1 of the.2004 edition); --- Revised the expression of the principle (see Chapter 4, Chapter 4 of the.2004 edition); --- Added Chapter 5 reaction formula to facilitate standard users to understand the titration principle and the relationship between reactants and product equivalents in calculation (see Chapter 5); --- Modified the mass fraction of concentrated sulfuric acid; added 5% sodium hydroxide solution and its preparation method, increased the titration of sodium thiosulfate method The reagent required for the removal of the reagent required for titration of ammonium ferrous sulfate with sodium diphenyl sulfate as an indicator (see section Chapter 6, Chapter 5 of the.2004 edition); ---Adjusted some experimental instruments, including the universal device magnetic stirrer as the pulp mixing device, instead of the previous version of the special Using a stirring device (see Chapter 7, Chapter 6 of the.2004 edition); --- Adjust the moisture content from the step to the test preparation (see 8.2, 8.1 of the.2004 edition); --- Edited the description of the measurement process, modified the description of pulp mixing according to the characteristics of the magnetic stirrer, will drop Determining the ammonium ferrous sulfate method and the sodium thiosulfate method, the sulfuric acid with sodium diphenyl sulfate as an indicator was deleted. Ferrous ammonium titration (see Chapter 9, Chapter 8 of the.2004 edition); --- In the description of the calculation formula, taking into account the titration of sodium thiosulfate method (see Chapter 10, Chapter 9 of the.2004 edition); --- Increased quality assurance and control (see Chapter 11); --- Added Appendix A; --- Added Appendix C and Appendix D to illustrate the color change of the solution at each stage of the titration process. This standard uses the redrafting method to modify the use of ISO 692.1982 "Determination of pulp alkali solubility." This standard has more structural adjustments than ISO 692.1982. Appendix A lists the provisions of this standard and ISO 692.1982. Number comparison list. The main technical differences between this standard and ISO 692.1982 and their reasons are as follows. --- Revised the scope of the statement to make the technical route of the method more clear (see Chapter 1); ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace ISO 638 with GB/T 462 modified to international standards; ● Added GB/T 601-2016, GB/T 740, GB/T 744, GB/T 6682. --- Revised the expression in terms and definitions to correspond to the title of this standard (see 3.1); --- Revised the statement of the principle to make it closely related to the test procedure of Chapter 9 (see Chapter 4); --- Increased reaction formula to facilitate standard users' understanding of the titration principle and the relationship between reactants and product equivalents in calculations (see Chapter 5); --- According to the domestic reagent specifications, modified the mass fraction of concentrated sulfuric acid; increased 5% sodium hydroxide solution and its preparation method; Corresponding to the test procedure in Chapter 9, the reagents required for the titration of sodium thiosulfate were added, and sodium diphenyl sulfate was removed. Titrate the reagents required for the indicator ammonium ferrous sulfate (see Chapter 6); --- According to the development of the current instrument, some experimental instruments have been adjusted, and the universal device magnetic stirrer is selected as the stirring of the pulp. In place of the special mixing device in the international standard (see Chapter 7); --- In the test procedure (see Chapter 9), the ammonium ferrous sulfate titration method only retains the fact that ferrous iron is used as an indicator in ISO 692.1982. In the test plan, the experimental scheme using sodium diphenyl sulfate as an indicator was deleted, and the thiosulfate mentioned in Note 5 of International Standard 8.2 was deleted. Sodium titration is written into the text (see 9.5.2); --- According to the adjustment of the test procedure, in the description of the calculation formula, taking the sodium thiosulfate method titration (see Chapter 10); --- Increased quality assurance and control to facilitate standard users to master technical key points and improve standard operability (see Chapter 11); This standard has made the following editorial changes. --- Edited the description of the measurement process, modified the description of pulp mixing according to the characteristics of the magnetic stirrer, will drop Description of the two methods of ammonium ferrous sulfate and sodium thiosulfate (see Chapter 9); --- Added a color chart to illustrate the color change of the solution at each stage of the titration process (see Appendix C and Appendix D). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Paper Industry Standardization Technical Committee (SAC/TC141). This standard was drafted. Shenzhen Institute of Inspection and Quarantine, South China University of Technology, Guangzhou Paper Co., Ltd., China Pulping Paper Research Institute, Shenzhen Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this standard. Xu Wei, Li Yong, Jiao Dong, Zhou Wei, Wu Shubin, Zhou Junhui, Yang Zuojun. The previous versions of the standards replaced by this standard are. ---GB/T 5401-1985, GB/T 5401-2004. Determination of pulp alkali solubility1 ScopeThis standard specifies the dissolution of pulp by measuring the specific concentration (mass fraction of 18%, 10% or other) in sodium hydroxide solution. The amount of potassium dichromate consumed by the reducing substance under specific conditions to reflect the dissolution of the pulp in a specific concentration of sodium hydroxide solution. Method for determining the content of organic matter. This standard applies to the determination of the alkali solubility of bleached pulp, semi-bleached pulp and unbleached pulp, and can also be used in the research of various stages of the production of bleached pulp.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 462 Determination of moisture in paper, paperboard and pulp analysis samples (GB/T 462-2008, ISO 287.1985, ISO 638. 1978, MOD) GB/T 601-2016 Preparation of chemical reagent standard titration solution GB/T 740 pulp sample (GB/T 740-2003, ISO 7213.1981, IDT) GB/T 744 Determination of alkali resistance of pulp (GB/T 744-2004, ISO 699.1982, MOD) GB/T 6682 Analytical laboratory water specifications and test methods (GB/T 6682-2008, ISO 3696.1987, MOD)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Alkali solubility alkalisolubility The ratio of the mass of the pulp to the mass of the dry pulp in a particular concentration of alkali solution, expressed as a percentage, referred to as the S value. 3.2 S18, S10 or Sc S18, S10orSc Indicate the S value of the alkali concentration, where the footnote 18, 10 or c is the concentration chosen for the alkaline solution, in grams of sodium hydroxide in 100 g of solution Said.4 PrincipleThe pulp has a reducing substance dissolved in a sodium hydroxide solution, which is separated by filtration and heated under concentrated sulfuric acid. The potassium dichromate undergoes a redox reaction, and the remaining potassium dichromate is titrated by the ammonium ferrous sulfate method or the sodium thiosulfate method to consume potassium dichromate. The amount of organic matter dissolved is calculated.5 reaction formula5.1 Ferrous ammonium sulphate titration 6Fe2 Cr2O72- 14H =6Fe3 2Cr3 7H2O ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5401-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 5401-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5401-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5401-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5401-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5401-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
