GB/T 5330.1-2012 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5330.1-2012: Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities Status: Valid GB/T 5330.1: Historical versions
Basic dataStandard ID: GB/T 5330.1-2012 (GB/T5330.1-2012)Description (Translated English): Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A28 Classification of International Standard: 19.120 Word Count Estimation: 19,177 Older Standard (superseded by this standard): GB/T 5330.1-2000 Quoted Standard: GB/T 5330; GB/T 10611; GB/T 13307; GB/T 19628.2; JB/T 7860 Adopted Standard: ISO 4783-1-1989, MOD Regulation (derived from): National Standards Bulletin No. 24 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the industrial wire screens and woven wire mesh size and wire diameter combinations. This section applies to industrial wire screens and woven wire cloth. GB/T 5330.1-2012: Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS19.120 A28 National Standards of People's Republic of China Replacing GB/T 5330.1-2000 Industrial wire screens and woven wire cloth Mesh size and wire diameter combinations Selection Guide - Part 1. General aperturesizeandwirediametercombinations-Part 1. Generalities (ISO 4783-1. 1989, MOD) Issued on. 2013-03-01 2012-09-03 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 5330 "Industrial wire screens and woven wire mesh size and wire diameter combinations Selection Guide" is divided into three section. --- Part 1. General; --- Part 2. industrial woven square hole wire mesh; --- Part 3. pre-bending shaped metal wire woven square hole sieve. This is Part 1 GB/T 5330's. Rules in this section in accordance with GB/T 1.1-2009 given draft. This Part replaces GB/T 5330.1-2000 "Industrial braided mesh size and diameter combinations of metal and wire mesh wire Guide to the choice. "Compared with the GB/T 5330.1-2000, the main technical content unchanged. This section uses redrafted Law Amendment uses ISO 4783-1. 1989 "Industrial wire screens and woven wire mesh size And wire diameter combinations Selection Guide Part 1. General. " This portion of the ISO 4783-1. 1989 technical differences exist, the terms of these differences have been involved in the blank position by its outer margin . The single vertical line (|) were labeled as follows technical differences and their causes. --- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● GB/T 10611 industrial mesh labeling method and the mesh size series (ISO 2194.1991, MOD); ● GB/T 19628.2 industrial metal mesh and woven wire mesh size and wire diameter combinations - choose means Priority south portfolio selection wire braid (ISO 4783-2. 1989, MOD); --- Revised Chapter 5 pre-bent forming and bonding valued coefficients f wire deformation provision, easy to operate; --- Revised Chapter 6 of the title and name of the chart; --- Deleted the provisions of Chapter 5 Notes and Table 2. For ease of use, this section also made the following editorial changes. --- Added Appendix A. This part of the characterization and sorting by the National Standardization Technical Committee and mesh particles (SAC/TC168) and focal points. This section is drafted. the machine Productivity Promotion Center, Xinxiang Bashan Precision Filter Co., Ltd. Anping Anwar network hardware category Products Limited. The main drafters of this section. Yu Fang, Liu Heqing, Xu Lan will. This part of the standard replaces the previous editions are. --- GB/T 5330.1-2000. Industrial wire screens and woven wire cloth Mesh size and wire diameter combinations Selection Guide - Part 1. General1 ScopeThis section GB/T 5330 provides for a combination of mesh size industrial wire screens and woven wire cloth and wire diameter. This section applies to industrial wire screens and woven wire cloth.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5330 industrial woven square hole wire mesh GB/T 10611 industrial mesh labeling method and the mesh size range (GB/T 10611-2003, ISO 2194.1991, MOD) GB/T 13307 pre-bent shaped woven wire square mesh GB/T 19628.2 Selection Guide industrial metal wire mesh and woven wire mesh size and wire diameter combinations Priority Portfolio Selection wire braid (GB/T 19628.2-2005, ISO 4783-2. 1989, MOD) JB/T7860 Industrial wire3 MarkIndustrial wire screens and woven wire cloth according to the following order mark (belong to the list item). a) mesh size W; b) wire diameter d; c) wire material; d) weaving pattern, see the provisions of GB/T 5330 and GB/T 13307 in.4 combination of aperture size and wire diameterMesh size according to the provisions of GB/T 10611, and Table 1 shows the number of matches the wire diameter, its value according to JB/T7860's Provisions and indicate the corresponding wire mesh sieve area percentage approximation screening area percentage according to equation (1) Calculation. A0 = 100 ww (1) Where. A0 --- screening area percentage,%; W --- the mesh size, in millimeters (mm); d --- wire diameter in millimeters (mm). Note. Select from the specification in Table 1, can provide additional data, such as the mass per unit area, per unit length of mesh. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5330.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 5330.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5330.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5330.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5330.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5330.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
