GB/T 5264-2022 English PDFUS$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5264-2022: Plunger of diesel fuel injection pump - Specifications Status: Valid GB/T 5264: Historical versions
Basic dataStandard ID: GB/T 5264-2022 (GB/T5264-2022)Description (Translated English): Plunger of diesel fuel injection pump - Specifications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J94 Classification of International Standard: 27.020; 43.060.40 Word Count Estimation: 18,140 Date of Issue: 2022-10-14 Date of Implementation: 2022-10-12 Older Standard (superseded by this standard): GB/T 5264-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5264-2022: Plunger of diesel fuel injection pump - Specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Plunger of diesel fuel injection pump -- Specifications ICS 27.020; 43.060.40 CCSJ94 National Standards of People's Republic of China Replacing GB/T 5264-2010 Diesel fuel injection pump plunger coupler Technical conditions Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical requirements 1 4.1 Manufacturing 1 4.2 Materials 1 4.3 Metallographic organization 2 4.4 Hardness 2 4.5 Flaw Detection 2 4.6 Geometric Tolerance 2 4.7 Surface Roughness 4 4.8 Diameter seal value 4 4.9 Slip 4 4.10 Reliability 5 4.11 Appearance 5 5 Test method 5 5.1 Metallographic examination 5 5.2 Hardness testing 5 5.3 Flaw detection 5 5.4 Geometric Tolerance Detection 5 5.5 Surface Roughness Detection 5 5.6 Diameter sealing test 6 5.7 Sliding test 6 5.8 Reliability test 6 5.9 Appearance Inspection 6 6 Inspection Rules 6 7 Marking, packaging, transportation and storage 7 Appendix A (Normative) Sampling Inspection and Qualification Judgment Rules for Plunger Pair Product Quality 8 Fig.1 Plunger geometrical toleranceFig.2 Fig.2 Geometrical tolerance of split plunger sleeveFig.3 Figure 3 Geometric tolerance of flanged plunger sleeve Figure 4 Table 1 Main geometrical tolerances of plunger and plunger sleeve3 Table 2 Plunger pair diameter seal value 5 Table 3 Classification of Inspection Items 6 Table A.1 Unqualified classification of plunger parts 8 Table A.2 Plunger failure classification 8 Table A.3 Plunger sleeve unqualified classification 9 Table A.4 Plunger Pair Sampling Plan and Inspection Results Judgment 10 Table A.5 Plunger Sampling Plan and Inspection Results Judgment 10 Table A.6 Sampling plan for plunger sleeve and determination of inspection results 10 Table A.7 Summary Table 11 of Test Results of Plunger Couplers Table A.8 Summary of plunger detection results Table 11 Table A.9 Plunger Sleeve Test Results Summary Table 11 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 5264-2010 "Technical Conditions for Piston Parts of Fuel Injection Pumps for Diesel Engines", compared with GB/T 5264-2010, In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) terms and definitions are added (see Chapter 3); b) Added material requirements for flanged plunger sleeves in plunger couplers (see 4.2); c) Added the hardness requirements for plunger sleeves made of 20CrMo alloy structural steel (see 4.4); d) Changed the flaw detection requirements of the plunger pair (see 4.5, 3.5 of the.2010 edition); e) The requirements for cracks in the plunger coupler are deleted (see 3.5 of the.2010 edition); f) Added the geometrical tolerance dimension drawing of flanged plunger sleeve (see 4.6); g) Added the verticality tolerance item of the plunger sleeve in Table 1 (see Table 1); h) Changed the data range of the second file in Table 2 (see Table 2, Table 2 of the.2010 edition); i) Changed the surface treatment requirements of the plunger pair (see 4.11.2, 3.4 of the.2010 edition); j) deleted the service life (see 3.14 of the.2010 edition); k) Deleted the service life assessment requirements (see 4.10 of the.2010 edition); l) The requirements for sampling locations for flanged plunger sleeve hardness testing have been added (see 5.2); m) The surface roughness detection method of plunger and plunger sleeve is added (see 5.5.1); n) Changed the pressure requirements of the upper space of the plunger (see 5.6.1, 4.8.1 of the.2010 edition); o) The intake pressure requirement for the diameter tightness test is deleted (see 4.8.3 of the.2010 edition); p) Added the test requirements for sealing standard samples (see 5.6.4); q) The classification of the inspection items of the plunger pair has been added (see Table 3); r) The verticality requirements for the non-conforming items of category C of the plunger sleeve have been added (see Table A.3). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Fuel Injection Systems (SAC/TC396). This document is drafted by. China FAW Co., Ltd. Wuxi Oil Pump and Nozzle Research Institute, Wuxi Weifu High-Tech Group Co., Ltd. The company, Longkou Longpump Diesel Injection High-tech Co., Ltd., Nanyue Electronic Control (Hengyang) Industrial Technology Co., Ltd., Heze Hengtai Oil Nozzle Oil Pump Co., Ltd. Co., Ltd., Junfeng Electric Control Technology (Dalian) Co., Ltd., Shandong Xinya Industry Co., Ltd., Yangzhou Xingyue Fuel Injection Co., Ltd., Shanghai Jinli Special Steel Co., Ltd., Jinhu County Changsheng Power Machinery Parts Co., Ltd. The main drafters of this document. Wang Zheng, Song Guomin, Xia Shaohua, Luo Cong, Tang Lifeng, Li Jing, Han Liyong, Ouyang Lingxiang, Liu Yuandong, Li Weijie, Yu Chunchao, Du Hongguang, Lin Dehong, Wang Shirong, Feng Qinghua, Deng Fei. The previous versions of this document and its superseded documents are as follows. ---First published in 1985 as GB/T 5264-1985, first revised in.2010; ---This is the second revision. Diesel fuel injection pump plunger coupler Technical conditions1 ScopeThis document specifies the technical requirements, test methods, inspection rules, markings, packaging, and transportation for the plunger couplers of fuel injection pumps for medium and small power diesel engines and storage. This document is applicable to the manufacture of plunger couplers for fuel injection pumps of medium and small power diesel engines.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 1031 Product Geometric Specifications (GPS) Surface Structure Profile Method Surface Roughness Parameters and Their Values GB/T 1958 Product Geometric Specifications (GPS) Geometric Tolerance Detection and Verification GB/T 2828.1 Counting Sampling Inspection Procedure Part 1.Lot-by-Lot Inspection Sampling Plan Retrieved by Acceptance Quality Limit (AQL) GB/T 3077 Alloy Structural Steel GB/T 10610 Product Geometric Specifications (GPS) Rules and Methods for Evaluating Surface Structure by Surface Structure Profile Method GB/T 10826.1 Fuel Injection Device Vocabulary Part 1.Fuel Injection Pump GB/T 18254 High carbon chromium bearing steel GB 19147 Vehicle Diesel JB/T 9730 Metallographic Inspection of Diesel Engine Fuel Injector Couplings, Plunger Couplings, and Oil Outlet Valve Couplings JB/T 9736 Magnetic particle inspection method for fuel injector coupler, plunger coupler and oil outlet valve coupler JB/T 12033 Reliability assessment method, bench test method and failure determination of fuel injection pump plunger pair3 Terms and DefinitionsTerms and definitions defined in GB/T 10826.1 apply to this document.4 Technical requirements4.1 Manufacturing Diesel engine fuel injection pump plunger parts (hereinafter referred to as plunger parts) shall be manufactured according to the product drawings and technical documents approved by the prescribed procedures. 4.2 Materials The plunger and the split plunger sleeve shall be made of GCr15 high carbon chromium bearing steel specified in GB/T 18254, and the flanged plunger sleeve shall be made of GCr15 high carbon chromium bearing steel specified in GB/T 18254. Made of 20CrMo alloy structural steel specified in GB/T 3077.Plunger and plunger sleeve allow other grades to meet material requirements Made of steel. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5264-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 5264-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5264-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5264-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5264-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5264-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
