GB/T 4888-2009 English PDFUS$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4888-2009: Terms and symbols for fault tree Status: Valid GB/T 4888: Historical versions
Basic dataStandard ID: GB/T 4888-2009 (GB/T4888-2009)Description (Translated English): Terms and symbols for fault tree Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 14,150 Date of Issue: 2009-10-15 Date of Implementation: 2009-12-01 Older Standard (superseded by this standard): GB/T 4888-1985 Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2009 (No. 151 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the fault tree analysis method commonly used definitions of basic terms and symbols. This standard applies to fault tree analysis process representation. GB/T 4888-2009: Terms and symbols for fault tree---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terms and symbols for fault tree ICS 03.120.30 A41 National Standards of People's Republic of China Replacing GB/T 4888-1985 Fault Tree terminology and symbols Posted 2009-10-15 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 events and symbols 1 3 logic gates and symbols 3 4 5 transfer symbol Fault Tree 5 5 Appendix A (informative) fault tree terminology and symbols of Buddhism Example 7 Reference 10ForewordThis standard replaces GB/T 4888-1985 "fault tree terminology and symbols." This standard and GB/T 4888-1985 compared to the main changes are as follows. --- According to GB/T 1.1-2000 "Standardization Guide Part 1. Standard structure and write rules," the requirements of the standard format It has been revised; --- Increasing the scope of the standard; --- Increase the definition of "event"; --- Increased references; --- Delete some unnecessary comments; --- To correct some wrong representation symbols. Appendix A of this standard is an informative annex. Application of this standard by the National Standardization Technical Committee on statistical methods (SAC/TC21) and focal points. This standard was drafted. Mathematics and System Sciences, Chinese Academy of Sciences, China Aerospace Science and Industry Corporation, China National Institute of Standardization, Beijing industry university. The main drafters of this standard. Dan, Hao Yunfeng, Ding Wenxing, YU Zhen Fan, Feng Shi Yong, Chen Min, Xie law. This standard replaces the standards previously issued as follows. --- GB/T 4888-1985. Fault Tree terminology and symbols1 ScopeThis standard specifies the definition of fault tree analysis method commonly used basic terminology and symbols. This standard applies fault tree analysis process representation.2 events and symbols2.1 Called the event condition or action. 2.2 Only lead to other events cause event. Note 1. The event is located at the bottom of the bottom of the fault tree in question, always an event input logic gate output event instead. Note 2. the end of the event are divided into basic events and unproven event. 2.2.1 No need to ascertain the reasons bottom events occurred. Basic events indicated by circular symbols shown in Fig. Figure 1 basic Event See Appendix A of the Explanatory Notes to A. 1. 2.2.2 In principle, should further ascertain the reason but do not have a temporary or temporarily unable to ascertain the reasons for the end of the event. Unproved event indicated by diamond symbols shown in Figure 2. Figure 2 unproved event See Appendix A of the Explanatory Notes to A. 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4888-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 4888-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4888-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4888-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4888-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4888-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
