GB/T 4854.6-2014 English PDF

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4854.6-2014: Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 6: Reference hearing threshold levels for test signals of short duration
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4854.6-2014	234	Add to Cart	3 days	Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 6: Reference hearing threshold levels for test signals of short duration	Valid

Similar standards

GB/T 3222.2   GB/T 3222.1   GB/T 4854.7   GB/T 3241.2   GB/T 4854.3   GB/T 4854.9   

Basic data

Standard ID: GB/T 4854.6-2014 (GB/T4854.6-2014)
Description (Translated English): Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 6: Reference hearing threshold levels for test signals of short duration
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A59
Classification of International Standard: 17.140
Word Count Estimation: 12,182
Date of Issue: 9/3/2014
Date of Implementation: 2/1/2015
Quoted Standard: GB/T 4854.1-2004; GB/T 7341.3-1998; GB/T 20441.1; IEC 60318-1; IEC 60318-4; IEC 60318-6
Adopted Standard: ISO 389-6-2007, IDT
Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the test signals of short duration reference hearing threshold level. This section applies to the use of such signals audiometric equipment calibration.

GB/T 4854.6-2014: Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 6: Reference hearing threshold levels for test signals of short duration

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Acoustics Reference zero for the calibration of audiometric equipment Part 6. Reference hearing threshold levels for test signals of short duration ICS 17.140 A59 National Standards of People's Republic of China Acoustics - Reference zero for the calibration of audiometric equipment Part 6. Test signals of short duration reference hearing threshold Part 6. Referencehearingthresholdlevelsfortestsignalsofshortduration (ISO 389-6.2007, IDT) Issued on. 2014-09-03 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 4854 "acoustic calibration of audiometric equipment - Reference zero" into the following sections. --- GB/T 4854.1 acoustic calibration of audiometric equipment - Reference zero for Part 1. the ear headphones pure tone reference equivalent threshold sound Pressure level; --- GB/T 16402 Acoustics pure tones and insert earphones Reference equivalent threshold sound pressure levels; --- GB/T 4854.3 acoustic calibration of audiometric equipment - Reference zero - Part 3. pure tones and bone vibrators Reference equivalent threshold force levels; --- GB/T 4854.4 Acoustics - Reference zero for the calibration of audiometric equipment - Part 4. Reference levels for narrow-band masking noise; --- GB/T 4854.5 acoustic calibration of audiometric equipment - Reference zero - Part 5. 8kHz ~ 16kHz frequency range of pure tones Reference equivalent threshold sound pressure levels; --- GB/T 4854.6 acoustic calibration of audiometric equipment - Reference zero - Part 6. Short reference process hearing threshold test signal; --- GB/T 4854.7 Section 7 Reference zero acoustic calibrator audiometric equipment. free-field and diffuse - field listening benchmark Hearing threshold; --- GB/T 4854.8 acoustic calibration of audiometric equipment - Reference zero - Part 8. Headphones pure tone reference equivalent threshold sound Pressure level; --- GB/T 4854.9 acoustic calibration of audiometric equipment - Reference zero - Part 9. Determination of the reference hearing threshold level preferred test condition. Note. In developing this standard Part 2, our country has not yet formed a series of standards, the standard number is GB/T 16402, in the part of the revision of its Standard will be changed to GB/T 4854.2. This section GB/T Section 64854 of. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 389-6.2007 "Reference zero - Part 6 acoustic calibrator audiometric equipment. short duration Benchmark signal hearing threshold level. " This section proposed by the Chinese Academy of Sciences. The acoustics in part by the National Standardization Technical Committee (SAC/TC17) centralized. This section drafted by. Institute of Otolaryngology, Chinese PLA General Hospital, Chinese Academy of Sciences Institute of Acoustics. The main drafters of this section. Wu Wenming, Chen Hongwen, Yu Ning, at dawn, Lv Yadong, Li Xiaodong.

Introduction

GB/T 7341.3 provides Auditory test signals of short duration. These include a short acoustic signals of short duration and tone for different listening Diagnostic tests, such as auditory electrophysiology (ECochG, auditory brainstem response, etc.) and transient evoked otoacoustic emissions and other aspects of auditory evoked response. this Reference section gives a short duration test signal hearing threshold. The provisions of this section describes the type of reference transducer hearing thresholds, hearing threshold allows measurement of the expression of consistency and uniformity. Acoustics - Reference zero for the calibration of audiometric equipment Part 6. Test signals of short duration reference hearing threshold

1 Scope

GB/T 4854 provisions of this part of the short duration of the test signal reference hearing threshold level. This section applies to the use of such signals audiometric equipment calibration. Note 1. Appendix A gives information about the different parameters and their impact on the hearing threshold level description. NOTE 2. ISO 389-9 provides standardized in audiometry preferred test conditions.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4854.1-2004 Acoustics calibration of audiometric equipment - Reference zero - Part 1. the ear headphones pure tone reference equivalent threshold Sound pressure level (ISO 389-1.1998, IDT) GB/T 7341.3-1998 Audiometers Part 3. Auditory test signals of short duration for audiometric and neuro - otological (IEC 60645-3.1994, IDT) GB/T 20441.1 electric acoustic measurement microphones - Part 1. Laboratory standard microphones (IEC 61094-1) IEC 60318-1 electro-acoustics simulator head and ear - Part 1. Align the ear headphones and earphones with ear simulator (Electroacoustics-Simulatorsofhumanheadandear-Part 1. Earsimulatorforthecalibrationofsu- pra-auralandcircumauralearphones) IEC 60318-4 electro-acoustics simulator head and ear - Part 4. measurement of insert earphones clogged ear simulator (Electro- acoustics-Simulatorsofhumanheadandear-Part 4. Occluded-earsimulatorforthemeasurementof earphonescoupledtotheearbyinserts) 1) IEC 60318-6 electro-acoustics simulator head and ear - Part 6. measurement of bone vibrators mechanical coupling (Electroacous- tics-Simulatorsofhumanheadandear-Part 6. Mechanicalcouplerforthemeasurementsonbonevi- brators) 2)

3 Terms and Definitions

GB/T 4854.1 and define the following terms and definitions apply to this document. 3.1 Short duration signal short-durationsignal A signal duration of less than 200ms. 1) IEC 60711. 1981 revision. 2) IEC 60373.1990 revision. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4854.6-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4854.6-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4854.6-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4854.6-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.