GB/T 4797.3-2024 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4797.3-2024: Classification of environmental conditions - Environmental conditions appearing in nature - Part 3: Living organisms Status: Valid GB/T 4797.3: Historical versions
Basic dataStandard ID: GB/T 4797.3-2024 (GB/T4797.3-2024)Description (Translated English): Classification of environmental conditions - Environmental conditions appearing in nature - Part 3: Living organisms Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A21 Classification of International Standard: 19.040 Word Count Estimation: 22,239 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 4797.3-2014 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 4797.3-2024: Classification of environmental conditions - Environmental conditions appearing in nature - Part 3: Living organisms---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 19:040 CCSA21 National Standards of People's Republic of China Replaces GB/T 4797:3-2014 Environmental conditions classification Natural environmental conditions Part 3: Biology Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Overview 1 5 Types and hazards of pests 2 5:1 Fungi 2 5:2 Bacteria 6 5:3 Insects 8 5:4 Rodents 8 5:5 Algae 9 5:6 Marine Life11 6 Division of biological environmental conditions in China12 6:1 Division Principles12 6:2 B1 Area 12 6:3 B2 Area 12 6:4 B3 Area 13 6:5 B4 Area 13 Reference 14 Table 1 List of antifungal materials 4 Table 2 List of potential fungal nutrients 4ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is Part 3 of GB/T 4797: GB/T 4797 has been published in the following parts: --- Classification of environmental conditions Natural environmental conditions Temperature and humidity (GB/T 4797:1-2018); --- Classification of environmental conditions Natural environmental conditions Air pressure (GB/T 4797:2-2017); --- Classification of environmental conditions Natural environmental conditions Solar radiation and temperature (GB/T 4797:4-2019); --- Classification of environmental conditions Natural environmental conditions Precipitation and wind (GB/T 4797:5-2017); --- Classification of environmental conditions Natural environmental conditions Dust, sand, salt spray (GB/T 4797:6-2013); --- Classification of environmental conditions for electrical and electronic products Natural environmental conditions Earthquake, vibration and shock (GB/T 4797:7-2008); --- Environmental conditions classification Natural environmental conditions Shock and vibration data measured during storage, transportation and use (GB/T 4797:9-2021): This document replaces GB/T 4797:3-2014 "Biological conditions of natural environment for electrical and electronic products" and is consistent with GB/T 4797:3-2014: In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Change "Main impacts of organisms on electrical and electronic products" to "Overview" to summarize the impacts of organisms on electrical and electronic products (see Section 4 Chapter 3 of the:2014 edition); b) Deleted “Occurrence of Fauna and Flora” (see Chapter 4 of the:2014 edition); c) The content of “Species and distribution of harmful organisms” was changed to “Species and hazards of harmful organisms” (see Chapter 5,:2014 edition, chapter); d) Combine the “Principles of Division of Biological Environmental Conditions” and “Division of Biological Environmental Conditions Regions” into “Division of Biological Environmental Conditions Regions in my country”: The distinction between algae and marine organisms was added (see Chapter 6, Chapter 6 and Chapter 7 of the:2014 edition): This document is modified to adopt IEC 60721-2-7:2018 "Classification of environmental conditions Part 2-7: Natural environmental conditions Fauna and flora group": The technical differences between this document and IEC 60721-2-7:2018 and their reasons are as follows: --- Added the description of fungal growth in water (see 5:1:2), which more comprehensively describes the growth of fungi in water; --- Deleted the "Distribution map of fungi in the world" (see Figure 1), which was not clearly defined, and added the biological conditions of my country: Divide; --- Added the impact of fungi on silicone rubber materials (see 5:1:4): my country's special environmental conditions will accelerate the impact of fungi on silicone rubber; --- Added specific types and hazards of algae (see 5:5): This type of organism has a great impact on my country's electrical and electronic products: important; --- Added the division of my country's biological environmental conditions (see Chapter 6), which provides important information for the design of my country's products: Basis for relevant environmental test methods: The following editorial changes were made to this document: --- In order to coordinate with the existing standards, the name of the standard was changed to "Classification of Environmental Conditions Natural Environmental Conditions Part 3: Biological Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document is proposed and coordinated by the National Technical Committee for Standardization of Environmental Conditions and Environmental Testing for Electrical and Electronic Products (SAC/TC8): This document was drafted by: China Electric Power Research Institute Co:, Ltd:, Tsinghua University Shenzhen International Graduate School, State Grid Jiangxi Electric Power Power Science Research Institute of China Electric Power Co:, Ltd:, Shanghai Quality Supervision and Inspection Technology Research Institute, Shenzhen Power Supply Bureau Co:, Ltd:, China Southern Power Grid Co:, Ltd: The Electric Power Research Institute of Ultra-high Voltage Transmission Company of Limited Liability Company, the Transmission Operation and Inspection Branch of Hainan Power Grid Co:, Ltd:, and Shenyang Avionics Detection Technology Co:, Ltd: Co:, Ltd:, Shenzhen Polytechnic, Siemens Power Automation Co:, Ltd:, Guangzhou University, China Electric Power Research Institute Co:, Ltd:, South China University of Technology: The main drafters of this document are: Liu Xin, Qin Hanjun, Jia Zhidong, Yan Nianping, Wang Tingting, Lü Qishen, Wei Xiaoxing, Xia Yunfeng, Kong Xiangyu, Wang Xilin, Chen Tian, Zhang Congguang, Fu Junhua, Xu Zhonggen, Xu Yi, Deng Yu, Wang Xiaoxiang, Shen Zikui: This document was first issued in 1986, revised for the first time in:2014, and this is the second revision:IntroductionEnvironmental conditions are used as background materials for selecting appropriate severity levels when testing and applying products, and are important for the evaluation, use and For different natural environmental conditions (such as temperature and humidity, air pressure, precipitation and wind), separate environmental conditions are given: And the possible impact on the product: GB/T 4797 is planned to consist of the following 10 parts: --- Part 1: Temperature and humidity: The purpose is to give the outdoor climate type expressed in temperature and humidity parameters: --- Part 2: Air pressure: The purpose is to give the air pressure values at different altitudes in the natural environment: --- Part 3: Biology: The purpose is to give the biological environmental conditions that affect electrical and electronic products under natural environmental conditions: --- Part 4: Solar radiation and temperature: The purpose is to give the climate types classified by solar radiation regions: --- Part 5: Precipitation and wind: The purpose is to give the characteristics of precipitation and wind related to electrical and electronic products: --- Part 6: Dust, sand and salt spray: The purpose is to give the characteristics of dust, sand and salt spray that occur in nature: --- Part 7: Seismic vibration and shock: The purpose is to give the environmental conditions under natural seismic vibration and shock: --- Part 9: Shock and vibration data measured during storage, transportation and use: The purpose is to give the basic Parameters and values: --- Part 10: Lightning: The purpose is to give the lightning environment conditions that affect electrical and electronic products in the natural environment: --- Part 11: Condensation: The purpose is to give the condensation environmental conditions that affect electrical and electronic products under natural environmental conditions: This revision of GB/T 4797:3 adds the division of biological environmental conditions in my country and improves the applicability of the standard: It will be consistent with the level of international standards, which will help eliminate technical trade barriers and better promote trade, exchanges and technological cooperation: Environmental conditions classification Natural environmental conditions Part 3: Biology1 ScopeThis document gives the biological environmental conditions that affect electrical and electronic products under natural environmental conditions: At any time, you may be affected or harmed by creatures: In addition, there are many creatures with different attack behaviors: This document addresses all areas where organisms may be harmful to the storage, transportation or use of products: Both natural and artificial environments can damage the product, such as in warehouses or buildings: However, plants are primarily exposed to the open air: Fungi and bacteria can exist in open areas as well as in warehouses or buildings: This document is intended to be used as background material when selecting appropriate biological conditions for a product:2 Normative referencesThis document has no normative references:3 Terms and definitionsThere are no terms or definitions that require definition in this document: The URLs for terminology databases used for standardization maintained by ISO and IEC are as follows: ISO Online Browsing Platform: http://www:iso:org/obp4 OverviewThis document mainly considers the impact of organisms on electrical and electronic products, including fungi, bacteria, insects, rodents, birds, algae, and marine life: This document does not consider the hazards caused by some biological factors due to their low risk, for example, some plant species The corrosive effects of secretions, the mechanical effects of taller tree growth (damaging building foundations or breaking power cables), and the effects of monkeys, damage caused by animals such as elephants, damage to aircraft caused by birds in flight, etc: In addition, this document does not consider the effects of the above-mentioned creatures: For example, rodents and insects can sometimes cause chemical corrosion or contamination: The frequency of occurrence of organisms that may damage the product depends on temperature and humidity conditions: Warm and humid climates are particularly prone to organisms: It is a good living and growing environment for insects, algae, fungi, bacteria and other microorganisms: In addition, moist or humid building locations are also suitable for rodents: Animals, insects and microorganisms survive and grow: Organisms may affect products in various ways, the most important of which include: a) Deterioration by physical attack: The function of the product can be affected by physical attack by organisms: Animals can damage the material of the product, especially by gnawing: Rods and insects feed on product materials by biting, eating, chewing and burrowing into them: In this way, the product material is severely damaged: Materials susceptible to such attack include wood, paper, leather, textiles Natural materials such as zinc, zinc, and zinc, as well as plastics (including elastomers) and even some metals (tin and lead): b) Deterioration caused by deposits: The functionality of the product can be affected by deposits of plant, animal and microbial origin: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4797.3-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 4797.3-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4797.3-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4797.3-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4797.3-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4797.3-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
