GB/T 4759-2009 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4759-2009: Exhaust silencers for internal combustion engines -- Measurement procedure
Status: Valid

GB/T 4759: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4759-2009	229	Add to Cart	3 days	Exhaust silencers for internal combustion engines -- Measurement procedure	Valid
GB/T 4759-1995	279	Add to Cart	3 days	Measurement procedure for exhaust silencers of internal combustion engines	Obsolete
GB 4759-1984	199	Add to Cart	2 days	Measurement procedure for exhaust silencers of internal combustion engines	Obsolete

Similar standards

GB/T 1859.1   GB/T 1859.2   JB/T 11880.2   GB/T 1859.4   

Basic data

Standard ID: GB/T 4759-2009 (GB/T4759-2009)
Description (Translated English): Exhaust silencers for internal combustion engines -- Measurement procedure
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J93
Classification of International Standard: 27.020
Word Count Estimation: 10,134
Date of Issue: 2009-03-19
Date of Implementation: 2009-11-01
Older Standard (superseded by this standard): GB/T 4759-1995
Regulation (derived from): National Standard Approval Announcement 2009 No.3 (Total No.143)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for measuring the internal combustion engine exhaust muffler (hereinafter referred to as silencers) acoustic performance and pneumatic (gas dynamics) properties. Also gives the measurement instrument, measurement conditions and the measurement location requirements. And the calculation of the surface of the exhaust noise sound pressure level and sound power level. This method can be used in standard engineering acceptance tests. This standard is designed to get two acoustic measurement accuracy class (engineering method) measurements. Such as when the background noise correction value is greater than 1. 3 dB but less than or equal to 3 dB, and/or environmental conditions can not meet the requirements of the standard engineering methods, you get three accuracy classes (simple method) measurements. This standard applies to GB/T 6072. 1 range of, small power engine muffler tests. Other uses muffler no suitable national standards may be used (including the intake silencer) may also refer to the use.

GB/T 4759-2009: Exhaust silencers for internal combustion engines -- Measurement procedure

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Exhaust silencers for internal combustion engines.Measurement procedure ICS 27.020 J93 National Standards of People's Republic of China Replacing GB/T 4759-1995 Engine exhaust muffler Measurement Posted 2009-03-19 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is GB/T 4759-1995 "engine exhaust muffler measurement methods" amendments. This standard and GB/T 4759-1995 The main difference is. --- Modify the scope; --- Modify the terms and definitions; --- Increased acoustic measurement 90 ° direction; --- Exhaust noise increases the surface sound pressure level and sound power level is calculated; --- Increasing the exhaust back pressure measurement; --- Modify the test report. Since the implementation of this standard, instead of the GB/T 4759-1995. Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation. The standard internal combustion engine by the National Standardization Technical Committee (SAC/TC177) centralized. This standard was drafted. Shanghai Internal Combustion Engine Research Institute, Shanghai Automotive Group Co., Ltd. Technical Center. The main drafters of this standard. Yuan Weiping, Pengmei Jun, Cai phase Confucianism, Yehuai Han, Chen Weifang. This standard replaces the standards previously issued as follows. --- GB 4759-1984, GB/T 4759-1995. Engine exhaust muffler Measurement

1 Scope

This standard specifies the measurement side engine exhaust muffler (hereinafter referred to as the muffler) acoustic and aerodynamic performance (gas dynamics) properties law. Also given on measuring instruments, measurement conditions and measurement requirements of the position, and exhaust noise surface sound pressure level and sound power level is calculated method. The standard engineering methods can be used for acceptance testing. The standard acoustic measurements aimed at obtaining Grade 2 accuracy rating (engineering method) measurements. Such as background noise correction value is greater than 1.3dB But less than or equal to 3dB, and/or environmental conditions can not meet the requirements of this standard engineering methods, the level of accuracy obtained Level 3 (simple method) Measurement results. This standard applies to GB/T 6072.1 Scope of medium and small power internal combustion engine muffler trials, there is no appropriate national standards can Muffler used for other purposes (including intake silencer) may also refer to use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3241 octave and fractional octave filters (GB/T 3241-1998, eqv IEC 61260.1995) GB/T 3785-1983 electric sound level meter, acoustic performance and test methods GB/T 3947 Acoustics Terminology GB/T 6072.1 reciprocating internal combustion engine performance - Part 1. Power, calibration and test methods of fuel consumption and lubricating oil consumption Additional requirements for engines for general use (GB/T 6072.1-2008, ISO 3046-1.2002, IDT) GB/T 6072.3 reciprocating internal combustion engine performance - Part 3. Test measurements (GB/T 6072.3-2008, ISO 3046-3. 2006, IDT) JJG176 acoustic calibrator verification procedures

3 Terms and Definitions

GB/T 3947 and established the following terms and definitions apply to this standard. 3.1 Has a sound-absorbing lining or special form structure can effectively reduce the airflow duct noise. Note. The engine exhaust muffler generally include the entire muffler assembly from the air inlet muffler beginning, excluding the internal combustion engine exhaust manifold and exhaust pipe. 3.2 Front and rear muffler device, a sound source of sound power levels of radiated noise difference outwardly through the exhaust port. Symbol. D; Unit. dB. When the exhaust pipe outlet location, size, shape and sound field distribution remains unchanged, then the insertion loss is equal to the given measurement point means muffler The difference between before and after excitation radiation sound pressure level noise outside through the exhaust port. 3.3 Condition before and after the calibration of the internal combustion engine, the muffler device with a power ratio of the difference between the power value when no silencer installed, with a percentage Shown. Symbol. γ. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4759-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4759-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4759-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4759-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4759-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4759-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.