GB/T 45497-2025 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45497-2025: Motor vehicle product recall - Guidelines for manufacturers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 45497-2025	439	Add to Cart	4 days	Motor vehicle product recall - Guidelines for manufacturers	Valid

Similar standards

GB/T 43388   GB/T 40501   GB/T 40499   

Basic data

Standard ID: GB/T 45497-2025 (GB/T45497-2025)
Description (Translated English): Motor vehicle product recall - Guidelines for manufacturers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: T00
Classification of International Standard: 43.020
Word Count Estimation: 22,298
Date of Issue: 2025-03-28
Date of Implementation: 3/28/2025
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 45497-2025: Motor vehicle product recall - Guidelines for manufacturers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 43.020 CCST00 National Standard of the People's Republic of China A Producer's Guide to Automotive Product Recalls Released on 2025-03-28 2025-03-28 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 3 4.1 Basic Principles 3 4.2 Working Mechanism 3 4.3 Basic Process 3 5 Automobile Product Recall Management System 4 5.1 Overview 4 5.2 System Construction 5 6 Defect Analysis Evaluation and Recall Decision 7 6.1 Information Collection and Analysis 7 6.2 Identification of suspected defects 7 6.3 Investigation, Analysis and Evaluation 8 6.4 Recall Decision 9 6.5 Decision-making processes affected by the investigation 9 7 Recall Implementation Process10 7.1 Preparation for recall of repair parts (software) 10 7.2 Recall Plan Report 10 7.3 Recall plan formulation 10 7.4 Recall Information Notice 11 7.5 Recall Implementation Process Management 12 7.6 Recall Effect Evaluation 12 7.7 Disposal of Defective Parts and Components 13 8 Defect Prevention and Quality Improvement 13 8.1 Defect Prevention 13 8.2 Quality Improvement 13 Reference 14

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Product Defects and Safety Management Standardization (SAC/TC463). This document was drafted by. State Administration for Market Regulation Defective Product Recall Technology Center, South China University of Technology, Tsinghua University, Zhejiang Jilin University, Li Automobile Co., Ltd., Guangqi Honda Automobile Co., Ltd., Shanghai Jiading District International Automobile Quality Standardization Association, Shanghai Motor Vehicle Inspection and Certification Certification Technology Research Center Co., Ltd., Changan Ford Automobile Co., Ltd., Chongqing Changan Automobile Co., Ltd., Guangzhou Automobile Group Co., Ltd. Ltd., SAIC General Motors Co., Ltd., China Automotive Engineering Research Institute Co., Ltd., Yutong Bus Co., Ltd., GAC Toyota Automobile Co., Ltd., Beijing Mercedes-Benz Sales and Service Co., Ltd., Zhejiang Zeekr Intelligent Technology Co., Ltd., BYD Auto Industry Co., Ltd. Ltd., Contemporary Amperex Technology Co., Ltd., SAIC Volkswagen Automotive Co., Ltd., Great Wall Motor Co., Ltd., Guangzhou Xiaopeng China Automotive Technology Co., Ltd., SERES Automotive Co., Ltd., Beijing Ideal Auto Co., Ltd., and Beijing China Automotive Research Institute Technology Co., Ltd. The main drafters of this document are. Li Yan, Wang Yan, Hu Wenhao, Xiao Lingyun, Dong Honglei, Kang Xiurui, Qu Xianguo, Chen Jiqing, He Xing, Liu Yahui, Fei Fan, Ren Yi, Xu Hua, Liang Hongyi, Li Wenzhao, Zhou Xiaohong, Lin Ye, Jiang Zhiwen, Wang Ping, Li Peng, Yan Xusheng, Xu Liangsong, Nie Qiang, Wang Peng, Ai Nengming, Yan Chongju, Chen Xianghui, Song Yange, Huang Rong, Zhang Chenggang, Shi Yan, Liu Wanli, Yang Youli, Zhang Dehu, Dong Guohua, Feng Chao, Fang Wentao, Xu Bin, Liang Xinmiao, Chen Yu, Jie Yaling, Chen Lihao, Cui Guanghua, Jin Ling.

Introduction

The "Automotive Product Recall Producer Guidelines" is an important part of my country's defective automotive product recall management standards. Defect analysis and evaluation and recall decision, producer recall implementation process, defect prevention and quality improvement. This document can be used as a guide for producers to carry out defect It is an important reference for the whole process management of automobile product recall. A Producer's Guide to Automotive Product Recalls

1 Scope

This document establishes the principles for automobile product manufacturers to carry out recall-related work, and provides the automobile product recall management system, defect analysis Guidance for evaluation and recall decisions, recall implementation processes, defect prevention, and quality improvement. This document is applicable to automobile product manufacturers, and can be used as a reference by related parts (software) manufacturers and operators.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 34402 Guidelines for Safety Risk Assessment and Risk Control of Automobile Products GB/T 39603 Guidelines for evaluating the effectiveness of recalls of defective automotive products GB/T 39892 Specification for reporting and handling of automotive product defect clues

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Manufacturer A legal person or other organization established in accordance with the law in China that produces automobile products and issues product certificates in its name, as well as a legal person or other organization established in China that produces automobile products and issues product certificates in its name, Enterprises that import automobile products for sale in China or institutions authorized by foreign enterprises in China. 3.2 Natural persons, legal persons and other organizations that produce or provide parts, components, software, systems and algorithms. [Source. GB/T 43387-2023, 4.2, modified] 3.3 operator Natural persons, legal persons and other organizations engaged in product production, operation or provision of services. [Source. GB/T 43387-2023, 4.3] 3.4 The department or organization (may be dedicated or non-dedicated) established by the producer (3.1) to carry out recall work Note. The producer’s recall management organization should be composed of recall decision-makers, recall liaison personnel, recall implementation promotion personnel, etc. 3.5 The unit that undertakes specific technical work during the product recall process according to the requirements of the recall authority. Note. In this document, technical institutions are referred to as such. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 45497-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 45497-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 45497-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 45497-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.