GB/T 45495-2025 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45495-2025: Consumer product defect engineering analysis - Test method for sharpness of edges
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 45495-2025	359	Add to Cart	4 days	Consumer product defect engineering analysis - Test method for sharpness of edges	Valid

Similar standards

GB/T 40990   GB/T 40993   GB/T 39063   GB/T 45276   GB/T 45272   

Basic data

Standard ID: GB/T 45495-2025 (GB/T45495-2025)
Description (Translated English): Consumer product defect engineering analysis - Test method for sharpness of edges
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y04
Classification of International Standard: 13.120
Word Count Estimation: 18,139
Date of Issue: 2025-03-28
Date of Implementation: 2025-03-28
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 45495-2025: Consumer product defect engineering analysis - Test method for sharpness of edges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45495-2025 English version. Consumer product defect engineering analysis - Test method for sharpness of edges ICS 13.120 CCSY04 National Standard of the People's Republic of China Consumer Product Defect Engineering Analysis Sharp Edge Test Method Test method for sharpness of edges Released on 2025-03-28 2025-03-28 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 Environmental conditions 1 6 Instruments and Equipment 2 7 Sample 2 8 Test Step 2 9 Test Results 5 10 Results Application 5 Appendix A (Normative) Sharp edge tester 6 Appendix B (Normative) Test tape dimensions and performance requirements 8 Appendix C (Normative) Determination of Consumer Products within Children’s Reach 9 Reference 10

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document was proposed and coordinated by the National Technical Committee for Product Defects and Safety Management Standardization (SAC/TC463). This document was drafted by. Defective Product Recall Technical Center of the State Administration for Market Regulation, Zhongbiao Energy Efficiency Technology (Beijing) Co., Ltd., Guangdong Midea Refrigeration Equipment Co., Ltd., Qingdao Haier Refrigerator Co., Ltd., Guangdong Midea Household Appliances Manufacturing Co., Ltd., Shaoxing Yuzhimeng Food Co., Ltd., China Customs Science and Technology Research Center, Qingdao Haier Air Conditioning Co., Ltd., China Household Electrical Appliances Research Institute, China Standards Institute of Chemical Engineering, Anhui Provincial Product Quality Supervision and Inspection Institute, Zhuhai Gree Electric Appliances Co., Ltd., Tianjin Product Quality Supervision and Inspection Technology Co., Ltd. Technology Research Institute, Hangzhou Robam Electric Co., Ltd., Wuxi Little Swan Electric Co., Ltd., Guangdong Product Quality Supervision and Inspection Institute, Hisense Refrigerator Co., Ltd., Zhejiang Institute of Inspection and Quarantine Science and Technology, Shandong Institute of Product Quality Inspection, China University of Metrology Modern Science and Technology College, Zhejiang Shaoxing Supor Household Appliances Co., Ltd., SGS-CSTC Standards Technical Services Co., Ltd., Dongguan Shishixing New Materials Co., Ltd., Shandong Xiansiqi Intelligent Technology Co., Ltd. The main drafters of this document are. Liu Yingchun, Zhang Wenli, Jiang Haojing, Li Yan, Wang Yan, Yang Yuzhai, Liu Wei, Shi Xiaowen, Zhang Pengkun, Chen Hui, Wang Changlin, Yang Lei, Yuan Beizhe, Zheng Jiechang, Xie Zhili, Li Wenzhao, Zheng Rulan, Chen Jian, Zhang Chaoran, Yin Yan, Jin Hanjie, Zhou Xiaoqin, Wang Zemei, Lü Kun, Chen Zhiwei, Liu Huihui, Xuan Ping, Liu Weitong, Fang Xiangjian, Chen Pingwei, Chen Dongpo, Wu Liangliang, Yuan Xingcheng, Shi Bengang, Hu Jinghui, Wang Hongjian, Shen Wei, Wu Yuzhong, Fang Peiji, and Wang Guojing.

Introduction

In the process of analyzing and summarizing mechanical injury incidents caused by consumer products, it was found that sharp edges are a major cause of mechanical injuries caused by consumer products. The sharp edges of consumer products are often found on the market, causing serious cuts to consumers. The engineering analysis test mainly evaluates the injury risk by simulating injury scenarios. Market regulators and producers are prone to disagreement on the evaluation results. This is not conducive to the implementation of consumer product defect investigation and recall work, so it is urgent to standardize the defect engineering analysis test of sharp edges of consumer products. method. This document is intended to standardize the defect engineering analysis test method for sharp edges of consumer products. The main principle is to use materials that simulate human skin to The sharpness of the tested edge is quantitatively evaluated based on the degree of penetration of the simulated skin material by contacting the accessible edge of the consumer product with a certain force and speed. level, ensuring the repeatability and consistency of the sharp edge defect engineering analysis results, effectively reducing the differences between market regulators and manufacturers, and reducing Reduce the harm caused to consumers by sharp edges. The issuing authority of this document draws attention to the fact that when declaring compliance with this document, it may involve 6.2, Chapter 8, Annex A and Annex B and new Use of patents related to intelligent sharp edge tester and edge sharpness assessment method (patent application number 202411846367.5). The issuing organization of this document takes no position on the authenticity, validity and scope of this patent. The patent holder has promised to the issuing agency of this document that he is willing to cooperate with any applicant under reasonable and non-discriminatory terms and conditions. The patent holder's statement has been filed with the issuing authority of this document. The following contact information is obtained. Name of patent holder. Liu Yingchun, Zhang Wenli, Shi Xiaowen, Liu Wei, Jiang Haojing, Yang Yuzhai, Jin Hanjie, Zhou Xiaoqin, Yin Yan, Yuan Beizhe, Yang Lei. Address. No. 66, Anli Road, Chaoyang District, Beijing. Please note that in addition to the above patents, some of the contents of this document may still involve patents. The issuing agency of this document does not assume the responsibility for identifying patents. responsibility. Consumer Product Defect Engineering Analysis Sharp Edge Test Method

1 Scope

This document describes the test method and analysis of the results for the sharpness of accessible edges on consumer products. This document is applicable to the investigation and analysis of defects in consumer products. The sharp edge test is performed as reference. This document is not applicable to the testing of functional sharp edges of consumer products.

2 Normative references

The contents of the following documents constitute essential clauses of the document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 6675.2 Safety of toys Part 2.Mechanical and physical properties GB/T 16842 Test fixture for testing the protection of enclosures to people and equipment

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Detachable part Parts or components of consumer products that require consumers to assemble or remove or open without tools, or that are required by the instructions for use. Please look for parts that require tools to remove. Note. This includes removable parts specified in the product standard. 3.2 accessibleedge The edge that can be touched by fingers during normal use and reasonable foreseeable abuse. 3.3 Sharp edge The reachable edge that may cause injury during normal use and reasonably foreseeable abuse.

4 Principle

The edge being tested is judged to be a touchable edge by using a touchable probe, and a sharp edge tester covered with three layers of test tape is used to simulate a human The scene where the skin touches the edge of the consumer product, moves a certain distance at a speed of 0.02m/s~0.05m/s on the touchable edge of the consumer product Finally, the sharpness of the edge is assessed by checking the penetration of the test tape.

5 Environmental conditions

Simulate the environmental conditions and scenarios in which consumer products are actually used. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 45495-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 45495-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 45495-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 45495-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.