GB/T 45441-2025 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45441-2025: Greenhouse gases - Quantification methods and requirements of carbon footprint of products - Plastic products
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 45441-2025	599	Add to Cart	5 days	Greenhouse gases - Quantification methods and requirements of carbon footprint of products - Plastic products	Valid

Similar standards

GB/T 45336   GB/T 45171   GB/T 43085   GB/T 18964.1   GB/T 12008.7   

Basic data

Standard ID: GB/T 45441-2025 (GB/T45441-2025)
Description (Translated English): Greenhouse gases - Quantification methods and requirements of carbon footprint of products - Plastic products
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Classification of International Standard: 83.140
Word Count Estimation: 30,380
Date of Issue: 2025-02-28
Date of Implementation: 2025-09-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 45441-2025: Greenhouse gases - Quantification methods and requirements of carbon footprint of products - Plastic products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45441-2025 English version. Greenhouse gases - Quantification methods and requirements of carbon footprint of products - Plastic products ICS 83.140 CCSG31 National Standard of the People's Republic of China Greenhouse gas product carbon footprint quantification method and Request plastic products Released on 2025-02-28 2025-09-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Quantitative principles 3 5 Purpose and scope determination 4 6 Life Cycle Inventory Analysis 6 7 Quantifying the Carbon Footprint of Plastic Products 8 8 Interpretation of Life Cycle Results 9 9 Plastic Product Carbon Footprint Report Contents 9 Appendix A (Informative) GWP Reference Value 11 Appendix B (Informative) Quantification of Carbon Footprint of Plastic Products (Example) 12 Appendix C (Informative) Processing technology and greenhouse gas emissions of common plastic products 13 Appendix D (Informative) Plastic Product Carbon Footprint Quantification Report Template 18 Reference 22

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was jointly proposed by the Ministry of Ecology and Environment of the People's Republic of China and the China Light Industry Federation. This document was jointly issued by the National Technical Committee on Standardization of Plastic Products (SAC/TC48) and the National Technical Committee on Standardization of Carbon Emission Management (SAC/TC548) jointly managed. This document was drafted by. China Plastics Processing Industry Association, Shenzhen 863 New Materials Technology Co., Ltd., Shuangma Plastics Co., Ltd. Company, Xiamen Changsu Industrial Co., Ltd., Tingran New Materials (Liaoning) Co., Ltd., Zhuzhou Hongda Polymer Materials Co., Ltd., Zhejiang Yuyue New Materials Materials Co., Ltd., Hebei Yisu Pipe Manufacturing Co., Ltd., Sichuan Yibin Plus Packaging Materials Co., Ltd., Wenzhou Qiangrun New Materials Materials Technology Co., Ltd., Jiangsu Shuangxing Color Plastic New Materials Co., Ltd., Taizhou Ruikang Daily Necessities Technology Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd., Ningbo Lishi Daily Necessities Co., Ltd., Beijing Technology and Business University, Shandong Lvsen Plastic Wood Composite Materials Co., Ltd., Tianjin Hua Hengxin Materials Co., Ltd., Oubaolan Environmental Protection Technology (Qingdao) Co., Ltd., Shanxi Zhongde Pipe Industry Co., Ltd., Cangzhou Dongsheng Plastic Co., Ltd. Company, Beijing Yiqing Product Quality Inspection Co., Ltd., Cangzhou Mingzhu Plastic Co., Ltd., Rifeng Enterprise (Foshan) Co., Ltd., Zhejiang Xin Hengtai New Materials Co., Ltd., Essel (Guangzhou) Packaging Co., Ltd., Ruichang Ronglian Environmental Protection Technology Co., Ltd., Zhejiang Geely Digital Technology Co., Ltd. Technology Co., Ltd., Shenzhen Green Ring Renewable Resources Development Co., Ltd., Shanghai Kangshi Food Technology Co., Ltd., Shanghai Energy Conservation and Emission Reduction Center Ltd., Guangzhou CESI Certification Center Service Co., Ltd., Light Industry Plastic Processing Application Research Institute, Beijing Academy of Science and Technology Resources and Environmental Protection Institute of Environmental Science and Technology, Sichuan University, Solid Waste and Chemical Management Technology Center of the Ministry of Ecology and Environment, Donghua University, Dalian Institute of Chemical Physics, Chinese Academy of Sciences Institute, Beijing University of Technology, International Cooperation and Exchange Center of the Ministry of Ecology and Environment, and Fujian Normal University. The main drafters of this document are. Tian Hui, Wang Xin, Yang Wenjun, Yin Fang, Li Fangyuan, Zeng Weichou, Sun Wenxun, Wang Maofeng, Gao Lingqiang, Yi Yongdong, Wu Peifu, Zhao Yongjian, Wang Baiti, Cai Ying, Wang Zhanjie, Wang Xiangdong, Wu Mingming, Liu Xiang, Wang Wenbin, Zhang Mingting, Zhou Guojun, Xing Lingyan, Zhao Qiang, Lü Ailong, Wang Zhen, Liu Weijun, Wu Hairong, Xu Jing, Wu Yang, Zhou Zeye, Jin Ying, Chen Jufang, Huang Zhigang, Xu Bo, Hu Jing, Sun Hui, Wang Hongtao, Zhao Zikang, Li Bin, Wang Yanqing, Gong Xianzheng, Wang Haoyang, Chen Xiaochuan. Greenhouse gas product carbon footprint quantification method and Request plastic products

1 Scope

This document specifies the principles, purpose and scope of carbon footprint quantification of plastic products, life cycle inventory analysis, interpretation of life cycle results and plastic Preparation of carbon footprint report for materials and products, etc. This document is applicable to the quantification of the carbon footprint of plastic products.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2035 Plastics Terminology GB/T 4754 National Economic Industry Classification GB/T 16288 Marking of plastic products GB/T 24044 Requirements and guidelines for environmental management life cycle assessment GB/T 24067 Requirements and guidelines for quantification of greenhouse gas product carbon footprint

3 Terms and definitions

The terms and definitions defined in GB/T 2035, GB/T 4754, GB/T 16288, GB/T 24044, GB/T 24067 and the following terms and definitions apply For use in this document. 3.1 Plastic products With synthetic resin (polymer compound) as the main raw material, it adopts extrusion, injection molding, blow molding, calendering, lamination, rotational molding, foaming, casting, suction Various products formed by plastic, weaving and other processes. Note 1.For the types of base polymers (polymer compounds) of plastic products, see GB/T 16288. Note 2.Derived from the description of Class 292 in Table 1 of GB/T 4754-2017. 3.2 Carbon footprint of plastic products life cycle The sum of greenhouse gas emissions during the life cycle of plastic products (expressed in carbon dioxide equivalent). 3.3 partial carbon footprint of plastic products The sum of greenhouse gas emissions (in carbon dioxide equivalent) from one or more selected stages or processes in the life cycle of a plastic product express). 3.4 Quantification of the carbon footprint of plastic products Activities to determine the life cycle and partial carbon footprint of plastic products. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 45441-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 45441-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 45441-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 45441-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.