GB/T 4498.1-2025 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4498.1-2025: Rubber - Determination of ash - Part 1: Muffle furnace method Status: Valid GB/T 4498.1: Historical versions
Basic dataStandard ID: GB/T 4498.1-2025 (GB/T4498.1-2025)Description (Translated English): Rubber - Determination of ash - Part 1: Muffle furnace method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G40 Classification of International Standard: 83.060 Word Count Estimation: 14,195 Date of Issue: 2025-04-25 Date of Implementation: 2025-11-01 Older Standard (superseded by this standard): GB/T 4498.1-2013 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 4498.1-2025: Rubber - Determination of ash - Part 1: Muffle furnace method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standard of the People's Republic of China ICS 83.060CCS G 40 Determination of rubber ash content Part 1.Muffle furnace method (ISO 247⁃1.2018, Rubber-Determination of ash- Part 1.Combustion method, MOD) 2025-04-25 Release 2025-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB/T 4498.1-2013 ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document is Part 1 of GB/T 4498 “Determination of ash content in rubber”. GB/T 4498 has been published in the following parts. --Part 1.Muffle furnace method; --Part 2.Thermogravimetric analysis. This document replaces GB/T 4498.1-2013 "Determination of ash content in rubber - Part 1.Muffle furnace method" and is compatible with GB/T 4498.1- Compared with.2013, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The “Scope” chapter was changed and Method C was added (see Chapter 1, Chapter 1 of the.2013 edition); b) Deleted “Bunsen burner” in the “instruments and equipment” (see 3.1, 3.2, 5.4, 7.1 and 7.2 of the.2013 edition); c) Added the principle (see 4.3), test steps (see 8.3) and precision (see 10.2 and Appendix A) of “Method C”; d) Added reagent or material “ash-free filter paper” (see 5.2); e) Added the temperature control condition of the muffle furnace in the instrument to 300℃±25℃ (see 6.5); f) The direct ashing method of "Method A" in the test procedure was deleted (see 7.1 of the.2013 edition); g) The allowable tolerance has been changed (see 10.1, Chapter 9 of the.2013 edition). This document is modified to adopt ISO 247-1.2018 "Rubber - Determination of ash content - Part 1.Combustion method". Compared with ISO 247-1.2018, this document has the following structural adjustments. --The description of the results of the three methods in Chapter 1 corresponds to 4.4 of ISO 247-1.2018; --5.2 corresponds to 6.5 in ISO 247-1.2018. The technical differences between this document and ISO 247-1.2018 and their reasons are as follows. -- Changed the applicable limits of Method C in the “Scope” (see Chapter 1, Chapter 1 of ISO 247-1.2018) to increase the validity of the method. Rational; the choice of crucible has been deleted (see Chapter 1 of ISO 247-1.2018) as it has been explained in 6.2; -- Changed "Bunsen burner" to "temperature-controlled electric furnace" (see 4.1, 4.2, 6.4, 8.1 and 8.2, 4.1, 4.2, 6.3, 8.1 of ISO 247-1.2018) and 8.2) to adapt to my country’s technical conditions; -- The heating time at 550 °C in method C (see 4.3 and 8.3 of ISO 247-1.2018) has been deleted to increase the compatibility of the method. reason; -- Added "analytical balance" (see 6.1) for ease of use; --The dimensions of “heat-resistant insulation board” (see 6.3, 6.2 of ISO 247-1.2018) have been changed to facilitate use; -- "Asbestos board" (see 6.3) was added to adapt to my country's technical conditions; -- The normative references GB/T 15340 replace ISO 1795, GB/T 24131.1 replace ISO 248-1 (see 7.1), and Adapt to the regulations of rubber sample preparation in my country; --Added the provisions for sample size (see 8.1 and 8.2) to facilitate operation; -- Changed the heating and weighing steps for the empty crucible (see 8.3, 8.3 of ISO 247-1.2018) to keep consistent with Method A and Method B. Consistency; -- The formulas (see Chapter 9, Chapter 9 of ISO 247-1.2018) have been changed to ensure the completeness of the formulas; --Increased the allowable difference (see 10.1) to improve operability. The following editorial changes were made to this document. --To coordinate with the existing standard, the name of the standard is changed to "Determination of Rubber Ash Content Part 1.Muffle Furnace Method"; --Changed the unit of crucible volume; --Changed the unit of concentrated sulfuric acid volume; --In Appendix A, repeatability and reproducibility of synthetic raw rubber were added; --Added references. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Technical Committee on Rubber and Rubber Products (SAC/TC 35). This document was drafted by. PetroChina Petrochemical Research Institute, Chinese Academy of Tropical Agricultural Sciences Institute of Engineering, Suzhou Huarui Rubber & Plastic Technology Co., Ltd., Liaocheng Jinge Synthetic Materials Co., Ltd., Zhejiang Xiantong Rubber & Plastic Co., Ltd., Su Guoli Chemical Technology Co., Ltd., Jiangxi Lanxing Xinghuo Silicone Co., Ltd., Jiaxing Beihua Polymer Additives Co., Ltd., Huludao Municipal Procuratorate Inspection and Testing Center, Shenyang Rubber Research and Design Institute Co., Ltd. The main drafters of this document are. Song Jierui, Zhang Huaqiang, Li Xiaoyin, Lu Guang, Chen Haihua, Zhao Qimo, Liu Xiuzheng, Xiang Junchuan, Hu Lixin, Dong Jing, Wang Rui, Zhong Yujia, Zhao Huihui, Chen Genping, Li Yimin, Li Jian, Kang Xiaotian. The previous versions of this document and the documents it replaces are as follows. --First published in 1984 as GB 4498-1984; --First revised in.1997, incorporating GB 6736-1986 "Determination of ash content of synthetic raw rubber" and GB 8085-1987 Contents of "Determination of ash content of natural rubber"; --Second revision in.2013; --This is the third revision.IntroductionAsh content is one of the important parameters for analyzing rubber composition and one of the important technical indicators of rubber. Impurities have a great impact on the quality and life of rubber. Ash determination can be used to characterize the content of these inorganic salts and impurities, thereby determining The quality of rubber, therefore, the analytical efficiency and method accuracy of ash determination have always been the focus of production and scientific research and development. "Determination of ash content in rubber" aims to establish different methods to facilitate users to determine the ash content in rubber and consists of two parts. --Part 1.Muffle furnace method. The purpose is to meet the determination needs of the muffle furnace method. --Part 2.Thermogravimetric analysis. The purpose is to meet the determination needs of thermogravimetric analysis. Determination of rubber ash content Part 1.Muffle furnace method Warning - Personnel using this document should have practical experience in formal laboratory work. This document does not indicate all possible safety The user is responsible for taking appropriate safety and health measures and ensuring that the conditions stipulated by relevant national laws and regulations are met. Note. Some procedures in this document may involve the use or generation of substances that are harmful to the local environment, or may generate waste After use, it is advisable to refer to the relevant documents for safe handling and disposal.1 ScopeThis document describes three methods for the determination of the ash content of raw rubber, rubber compounds or vulcanized rubber. This document is applicable to raw rubber, compound rubber or vulcanized rubber of types M, N, O, R and U described in GB/T 5576, except for the following restrictions. Outside the system. --Method A is not applicable to the determination of rubber compounds or vulcanized rubber containing chlorine, bromine or iodine; --Method B is applicable to the determination of mixed rubber or vulcanized rubber containing chlorine, bromine or iodine, but not to unmixed rubber; --Method C is applicable to the determination of raw rubber, natural rubber compound or vulcanized rubber that does not contain chlorine, bromine or iodine. Paper package. The three methods do not necessarily yield the same results in all cases. This document does not cover the interpretation of ash due to inorganic ingredients in rubber compounds or vulcanizates. This is the responsibility of the analyst, who We need to understand the characteristics of various rubber compounds at high temperatures.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 15340 Sampling and sample preparation methods for natural and synthetic raw rubber (GB/T 15340-2025, ISO 1795.2017, IDT) GB/T 24131.1 Determination of volatile matter content of raw rubber Part 1.Hot roll method and oven method (GB/T 24131.1- 2018, ISO 248.2011, MOD)3 Terms and definitionsThere are no terms or definitions that require definition in this document.4 Principle4.1 Method A Place the weighed sample in a crucible and heat it on a temperature-controlled electric furnace. After the volatile decomposition products have escaped, transfer the crucible to the muffle. Heating continues in the furnace until all carbon-containing materials are burned out and a constant mass is achieved. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4498.1-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 4498.1-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4498.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4498.1-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4498.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4498.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
