GB/T 43100-2023 English PDF

US$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43100-2023: Thermal spraying - Post-treatment and finishing of thermally sprayed coatings
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 43100-2023	269	Add to Cart	3 days	Thermal spraying - Post-treatment and finishing of thermally sprayed coatings	Valid

Similar standards

GB/T 45345   GB/T 43101   GB/T 38518   GB/T 43099   

Basic data

Standard ID: GB/T 43100-2023 (GB/T43100-2023)
Description (Translated English): Thermal spraying - Post-treatment and finishing of thermally sprayed coatings
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A29
Classification of International Standard: 25.220.20
Word Count Estimation: 14,111
Date of Issue: 2023-09-07
Date of Implementation: 2024-04-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 43100-2023: Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25.220.20 CCSA29 National Standards of People's Republic of China Thermal Spray Post-processing and finishing of thermal spray coatings (ISO 14924.2005,MOD) Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is modified to adopt ISO 14924.2005 "Post-processing and finishing of thermal spray coatings". A "Terms and Definitions" chapter has been added to this document. The technical differences between this document and ISO 14924.2005 and their reasons are as follows. ---Replaced ISO 504 (see 4.1.2) with normatively quoted GB/T 17985.1 to adapt to my country's technical conditions and increase operability work nature; ---Replaced ISO 2063 (see 5.3) with normatively cited GB/T 9793 to adapt to my country's technical conditions and increase operability work nature; ---Replaced ISO 12944-5 (see 5.3) with normatively cited GB/T 30790.5 to adapt to my country's technical conditions and increase the availability operability; ---Replaced ISO 14920 (see 6.1) with normatively quoted GB/T 16744 to adapt to my country's technical conditions and increase operability Doing things. Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Standardization Technical Committee for Metallic and Non-metallic Coverings (SAC/TC57). This document was drafted by. Wuhan Materials Protection Research Institute Co., Ltd., Hunan University, Jiangsu Spree Technology Co., Ltd., Shanghai Inverman Nanotechnology Co., Ltd., Lingyun Technology Group Co., Ltd., Xi'an Jiaotong University. The main drafters of this document. Chen Tongzhou, Wang Qun, Liang Dong, Qu Pingping, Tian Qingfen, Yang Guanjun, Gao Mingchuan, Shi Bowen, Yi Juan, Wang Shiyang, Liu Jin, Li Tao.

Introduction

Proper selection of post-treatment and/or finishing procedures for thermal spray coatings is a critical factor in ensuring the proper use of thermal spray parts. hot spray The processing and/or treatment of coatings must particularly consider the layered structure of the coating, which is significantly different from that of castings or forgings of the same material. Finishing techniques used on castings or forgings may damage thermal spray coatings. Thermal Spray Post-processing and finishing of thermal spray coatings

1 Scope

This document specifies the post-treatment and finishing of thermal spray coatings. This document applies to different types of mechanical post-treatment, chemical treatment and heat treatment of thermal spray coatings, including cutting and other types of machinery Machining, sealing, acid etching, coating, remelting, diffusion annealing and hot isostatic pressing.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 9793 Thermal spraying of metals and other inorganic coatings zinc, aluminum and their alloys (GB/T 9793-2012, ISO 2063. 2005,IDT) GB/T 16744 Thermal spray self-fluxing alloy spraying and remelting (GB/T 16744-2002, ISO 14920.1999, MOD) GB/T 17985.1 Carbide turning tools Part 1.Codes and markings (GB/T 17985.1-2000, ISO 504.1975, MOD) GB/T 30790.5 Paint and varnish protective coating systems for corrosion protection of steel structures - Part 5.Protective coating systems (GB/T 30790.5-2014,ISO 12944-5.2007, MOD)

3 Terms and definitions

There are no terms or definitions to be defined in this document. 4 Mechanical post-processing 4.1 Cutting processing 4.1.1 General Thermal spray coatings have different properties from castings and forgings of the same material, so general tool cutting technology is not suitable for them. spray There are many different hard phases in the coating, such as oxides, carbides, borides, silicides, etc., so special attention needs to be paid to the geometry of the blade. shape to prevent excessive wear on its sides. 4.1.2 Turning The turning performance of thermal spray metal coatings depends on their specific properties, such as structure and hardness, as well as the initial thermal spray process used. a) Selection of cutting tools Since the metal thermal spray coating contains a hard phase and some extremely hardened spray particles, the load on the turning tool is much higher than that of the machining phase. Castings or forgings of the same or similar materials. Because of the characteristics of thermal spray coatings, carbide and ceramic tools are required for its processing. These two types of tools are generally used for turning gray. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 43100-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 43100-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 43100-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 43100-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.