GB/T 42151.6-2024 English PDF
Basic dataStandard ID: GB/T 42151.6-2024 (GB/T42151.6-2024)Description (Translated English): Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in power utility automation systems related to IEDs Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F21 Classification of International Standard: 29.240.01 Word Count Estimation: 338,339 Date of Issue: 2024-12-31 Date of Implementation: 2025-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42151.6-2024: Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in power utility automation systems related to IEDs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29.240.01 CCSF21 National Standard of the People's Republic of China Power automation communication network and system Part 6.Electricity related to intelligent electronic devices Automation System Communication Configuration Description Language (IEC 61850-6.2018,IDT) Released on 2024-12-31 2025-07-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 1.1 Overview 1 1.2 Namespaces and Versions 1 1.3 Code Component Distribution 1 2 Normative references 3 3 Terms and Definitions 4 4 Abbreviations 5 5 SCL's expected engineering process 6 5.1 General 6 5.2 SCL Range 6 5.3 Use of SCL in the Engineering Process 7 5.4 IED Modification 10 5.5 Data exchange between projects 10 6 SCL Object Model12 6.1 General 12 6.2 Process Model 16 6.3 Product (IED) model 17 6.4 Communication System Model 17 6.5 Redundancy Modeling 18 6.6 Data Flow Modeling 19 7 SCL description file type 19 8 SCL language 21 8.1 Standardization Methods 21 8.2 Language Version and Compatibility 23 8.3 SCL Language Extensions 26 8.4 General structure 29 8.5 Object and Signal Naming 29 9 SCL Syntax Elements 33 9.1 Header 33 9.2 Process Description 35 9.3 IED Description 57 9.4 Communication System Description 100 9.5 Data Type Templates 108 10 Tools and Project Engineering Permissions 122 10.1 IED Configuration Tool 122 10.2 System Configuration Tools 123 10.3 Transfer of authority between projects 123 Appendix A (Normative) SCL Syntax. XML Schema Definition 125 A.1 Basic Types 125 A.2 Substation syntax 151 A.3 Data Type Templates 170 A.4 IED capabilities and structure 175 A.5 Communication subnet 197 A.6 Main SCL 207 Appendix B (informative) SCL enumeration 211 as defined in IEC 61850-7-3 and IEC 61850-7-4 Appendix C (Informative) Syntax Extension Examples 212 C.1 Extended syntax for drawing layout coordinates 212 Appendix D (Informative) Example 215 D.1 Example Specification 215 D.2 Example of SCL file content 217 Appendix E (Informative) SCL Syntax. Generic XML Schema Definition 239 E.1 Overview 239 E.2 Basic Types 239 E.3 Substation syntax 265 E.4 Data Type Templates 265 E.5 IED Capabilities and Structure 265 E.6 Communication subnet 288 E.7 Main SCL 288 Appendix F (Informative) XML Schema Definitions for SCL Variants 292 Appendix G (Normative) SCL Implementation Conformance Statement (SICS) 302 Appendix H (Informative) ExtRef Use Case 308 Appendix I (Normative) SCL---Mixed Version Project 314 I.1 Overview 314 I.2 Demotion Rules317 I.3 Upgrade Rules 322 I.4 Mixed versions of Ed2 and Ed2.1 devices/SCT items 325 Reference 330ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 6 of GB/T 42151 "Electric Power Automation Communication Networks and Systems". GB/T 42151 has been published for the following part. --- Part 3.General requirements; --- Part 4.System and project management; --- Part 5.Communication requirements for functional and device models; --- Part 6.Communication configuration description language for power automation systems related to intelligent electronic devices; --- Part 7-1.Basic communication structure principles and models; --- Part 7-2.Basic information and communication structure Abstract Communication Service Interface (ACSI); --- Part 7-7.IEC 61850 related data model machine processable format for tools; --- Part 8-1.Specific Communication Service Mapping (SCSM) Mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO /IEC 8802-3. This document is equivalent to IEC 61850-6.2018 "Electric power automation communication networks and systems Part 6.Related to intelligent electronic devices Communication Configuration Description Language for Electric Power Automation System. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Electricity Council. This document is under the jurisdiction of the National Technical Committee for Standardization of Power System Management and Information Exchange (SAC/TC82). This document was drafted by. Nanjing NARI Relay Protection Electric Co., Ltd., State Grid Corporation of China National Electric Power Dispatching and Control Center, NARI Group Group Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd., China Southern Power Grid Co., Ltd., China Southern Power Grid Electric Power Technology Co., Ltd., Xuji Electric Co., Ltd., Tianjin Jingui Huihai Technology Development Co., Ltd., Guodian Nanjing Automation Co., Ltd., Beijing Sifang Bao Automation Co., Ltd., Dongfang Electronics Co., Ltd., State Grid Electric Power Research Institute Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd. The company's ultra-high voltage branch and Jiangsu Hongyuan Electric Co., Ltd. The main drafters of this document are. Du Jun, Wen Jifeng, Zhou Bin, Shen Jian, Chang Naichao, Liao Zeyou, Tang Yongjian, Yin Jun, Ren Yanming, Zhang Qibing, Li Jin, Feng Shanqiang, Yang Song, Wang Zhihua, Zhang Yandong, Zeng Ziqing, Liu Liu, Sun Dan, and Zhai Chenghao.IntroductionGB/T 42151 "Electric Power Automation Communication Network and System" aims to provide interoperability for all equipment in the electric power automation system. The following parts are composed. --- Part 1.Introduction. The purpose is to introduce the overview of this document. --- Part 2.Terminology. The purpose is to list the terms and definitions used in this document. --- Part 3.General requirements. The purpose is to introduce the overall requirements of communication networks, with an emphasis on quality requirements. --- Part 4.System and project management. The purpose is to describe the requirements for system and project management processes and the requirements for engineering and testing Dedicated support tools required. --- Part 5.Communication requirements for functions and device models. The purpose is to specify the communication requirements for various functions of the power automation system. --- Part 6.Communication configuration description language for power automation systems related to intelligent electronic devices. The purpose is to exchange of intelligent electronic device capability descriptions in a way that allows for the exchange of power automation system capabilities between tools provided by different manufacturers describe. --- Part 7.Basic communication structure of power automation system. The purpose is to define a hierarchical class model and the services provided by these classes. services to enable communication between devices. --- Part 8.Specific communication service mapping SCSM. The purpose is to provide substation control layer and bay layer and station control layer and Communication mapping between bay layers. --- Part 9.Specific communication service mapping SCSM. The purpose is to provide substation bay layer and process layer and bay layer and Communication mapping between process layers. --- Part 10.Conformance testing. The purpose is to specify the standard technology for implementing conformance testing and to use when proposing performance parameters specific measurement techniques. This document is part of a set of definitions that describe in detail a hierarchical power automation communication architecture that provides abstract definitions of classes and services. The definition is independent of a specific communication stack, implementation, or operating system. This document specifies a description language for the configuration of intelligent electronic devices (IEDs) in power automation. This language is called system configuration description. SCL is used to describe the IED configuration and communication system implemented in accordance with GB/T 42151.5-2022 and IEC 61850-7-x. It can standardize the relationship between power automation systems and processes (substations, switchyards). At the application layer, SCL can describe the relationship between switchyards. The relationship between the topology itself and the switchyard structure and the (SAS Substation Automation System) functions (logical nodes) configured in the IED. While this document specifies the configuration language used to describe IEC 61850 systems, other parts of the standard also describe how to Therefore, implementations claiming conformance to this document MAY observe constraints from other normative references. To be clear, some references to other parts have been included, but not all of them. Note. The process description in this document is limited to switchyard and general process functions. It will be extended to wind farms, hydropower plants and distributed energy through subsequent corresponding documents. (DER) for improvement. SCL allows the description of the IED configuration to be passed to communication and application system engineering tools and to communicate the configuration of the entire system in a compatible manner. The description is passed back to the IED Configuration Tool. Its main purpose is to allow communication between the IED Configuration Tool and system configuration tools from different manufacturers. Interoperable exchange of communication system configuration data between IEC 61850-8-x and IEC 61850-9-x involve mapping IEC 61850-7-x to specific communication stacks, which can be used as needed. These definitions may be extended by additional parts, or simply by restricting the values of the objects that should be used. Power automation communication network and system Part 6.Electricity related to intelligent electronic devices Automation System Communication Configuration Description Language1 Scope1.1 Overview This document specifies the functions used to describe the configuration and parameters of IEDs related to communication, communication system configuration, switches, A file format for storing field (function) structures and their relationships. The main purpose of this format is to store data provided by different manufacturers in a compatible manner. IED capability descriptions and substation automation system descriptions are exchanged between IED engineering tools and system engineering tools. The language defined in this document is called Substation Configuration Description Language (SCL). The IED and communication system models in SCL conform to GB/T 42151.5-2022 and IEC 61850-7-x. SCSM-specific extensions or usage rules may be required in appropriate sections. XML entries). This document does not specify individual implementations or products that use the language, nor does it constrain the implementation of entities and interfaces in computer systems. The document does not specify the format in which the configuration data is downloaded to the IED, although it may be used as part of the configuration data. 1.2 Namespaces and versions This clause is mandatory for any IEC 61850 namespace (as defined in IEC 61850-7-1.2011). ● Namespace version..2007 ● Namespace revision. B ● Namespace release version (release). 4 ● Namespace release date..2018/01/22 The following table provides an overview of all releases for this namespace. Version Release Date Online Store Namespace Edition 1.0 (hereinafter referred to as Ed1).2004-03 IEC 61850-6.2004 IEC 61850-6.2003 Edition2.0 (hereinafter referred to as Ed2).2009-12 IEC 61850-6.2009 IEC 61850-6.2007B Edition2.0 Revision 1.2018 IEC 61850-6.2009/AMD1.2018 IEC 61850-6.2007B4 Edition2.1 (hereinafter referred to as Ed2.1).2018 IEC 61850-6.2009 AMD1.2018CSV IEC 61850-6.2007B4 1.3 Code Component Distribution The code components included in this document are also available as electronically readable files from the following access paths. The code components included in this document may be affected by maintenance work. Users should select the latest version from the library located at the following location. Version. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42151.6-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 42151.6-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42151.6-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42151.6-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
