GB/T 41801.1-2022 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41801.1-2022: Information technology - Biometric System-on-Card - Part 1: Core requirements
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41801.1-2022	189	Add to Cart	3 days	Information technology - Biometric System-on-Card - Part 1: Core requirements	Valid

Similar standards

GB/T 42442.1   GB/T 42451   GB/T 42408   GB/T 17554.1   GB/T 41784   GB/T 41801.2   

Basic data

Standard ID: GB/T 41801.1-2022 (GB/T41801.1-2022)
Description (Translated English): Information technology - Biometric System-on-Card - Part 1: Core requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L70
Classification of International Standard: 35.240.15
Word Count Estimation: 10,143
Date of Issue: 2022-10-14
Date of Implementation: 2023-05-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41801.1-2022: Information technology - Biometric System-on-Card - Part 1: Core requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology -- Biometric System-on-Card -- Part 1.Core requirements ICS 35.240.15 CCSL70 National Standards of People's Republic of China Information Technology Card Biometric Identification System Part 1.Basic requirements Part 1.Corerequirements (ISO /IEC 17839-1.2014, MOD) Published on 2022-10-12 2023-05-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Abbreviations 2 5 Functional Architecture of Biometric Identification System on Card 2 5.1 Comparison of biometric identification systems on cards 2 5.2 Biometric Identification System on S1 Card 3 5.3 S2 type card biometric identification system 3 5.4 Sensor Type 3 6 Power 4 6.1 Overview 4 6.2 Contact power supply 4 6.3 Contactless power supply 4 6.4 Internal power supply 4 7 Infrastructure 4 Appendix A (Informative) Specification S2 Type Motivation 5 Reference 6 Figure 1 General architecture of biometric authentication using on-card system comparison 3

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 1 of GB/T 41801 "Biometric Identification System on Information Technology Cards". GB/T 41801 has been released the following parts. --- Part 1.Basic requirements; --- Part 2.Physical characteristics; --- Part 3.Logical information exchange mechanism. This document is modified to adopt ISO /IEC 17839-1.2014 "Biometric Identification Systems on Information Technology Cards - Part 1.Basic Require". The technical differences between this document and ISO /IEC 17839-1.2014 and their reasons are as follows. ---According to the fact that this document is not cited, the normative reference in Chapter 3 "Terms and Definitions" in the original text of the International Standard is deleted. ISO /IEC 2382-37; --- For ease of understanding, the term "biometric sample" has been added (see 3.4); --- Use national standards instead of international standards to adapt to my country's technical conditions. GB/T 30266 instead of ISO /IEC 24787 (see 5.1), replace ISO /IEC 7810 with GB/T 14916 (see 5.2, 5.3), replace with GB/T 16649.1 ISO /IEC 7816-1 (see 5.2, 5.3), replace ISO /IEC 7816-3 (see 5.2, 6.2) with GB/T 16649.3, use GB/T 16649.12 replaces ISO /IEC 7816-12 (see 5.2, 6.2), and GB/T 41801.2 replaces ISO /IEC 17839.2 (see 5.3), which replaces ISO /IEC 7816 (see 6.1) with GB/T 16649.3 and GB/T 16649.12; ---Because of the relevant descriptions in the introduction, the text 5.2 of the International Standard about "This International Standard defines two different types of The cards. S1 type and S2 type. "description of. The following editorial changes have been made to this document. --- The title of Chapter 4 is changed from "Symbols and Abbreviations" to "Abbreviations"; ---Informative Appendix A replaces ISO /IEC 7816 in the original text of the International Standard with GB/T 16649.1. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28). This document is drafted by. Beijing Eye Intelligent Technology Co., Ltd., Anhui Baoxin Information Technology Co., Ltd., Jiangsu Saixi Technology Development Co., Ltd. Co., Ltd., Beijing Zhixin Microelectronics Technology Co., Ltd., China Electronics Standardization Institute, Chutianlong Co., Ltd., Shenzhen Saixixin Information Technology Co., Ltd., Beijing Watch Data Co., Ltd., Ziguang Tongxin Microelectronics Co., Ltd., Feitian Chengxin Technology Co., Ltd., CLP Smart Card Co., Ltd., Shanghai Fudan Microelectronics Group Co., Ltd., Datang Microelectronics Technology Co., Ltd., Eastcom Peace Branch Technology Co., Ltd., Jinbangda Co., Ltd., Beijing Xinkejian Technology Co., Ltd., Hengde Technology Co., Ltd., Shanghai Mitte Printing Co., Ltd. Company, Beijing Zhongdian Huada Electronic Design Co., Ltd., China UnionPay Co., Ltd. The main drafters of this document. Cao Guoshun, Yang Chunlin, Li Guanglei, Zhao Dongyan, Chen Yanning, Song Fangfang, Yuan Aiyang, Jiang Quming, Zhou Bin, Zheng Jiangdong, Zhang Shurui, Sheng Jinggang, Zhu Pengfei, Zhang Gang, Shao Xing, Yu Hengyi, Zhang Xiaochuan, Cheng Wenjie, Dong Guangzhi, Zhao Songde, Xu Pingjiang, Liu Xiaochen, Li Dan, Tao Ranzhi.

Introduction

For the purpose of this document, an on-card biometric system means a portable card-sized device comprising the following elements. Biometric collection, data processing, storage, comparison, decision-making. Physically and logically integrating sensors and signal processing onto the card Functional extension of biometric alignment. GB/T 16649.11-2019, ISO /IEC 19785-3, ISO /IEC 19795-7 and GB/T 30266 contain information on biological Feature comparison techniques. On-card biometric systems are still not adequately covered. The industry needs a new card on the completely independent A standard for biometric identification systems that enables interoperability and specifies minimum quality standards for such a system to function reliably. Integrating the biometric sensor into the card of GB/T 14916 and testing the twisting and bending properties of it is a technical challenges. This document describes two types of on-card biometric systems. Type S1 is a card with good flexural toughness, which fully complies with the In accordance with the provisions of GB/T 14916; while the S2 type has different requirements in terms of size and flexibility of the card, other requirements remain unchanged, including no contact use of the ICC interface. GB/T 41801 "Biometric Identification System on Information Technology Card" is proposed to consist of three parts. --- Part 1.Basic requirements. The purpose is to specify the functional architecture of on-card biometric systems, two types of on-card Definition of biometric identification system implementation and related content of sensors and power supply of biometric identification system on card. --- Part 2.Physical properties. The purpose is to specify the physical characteristics of biometric identification systems on cards, including biometric identification cards size, location and size of biometric capture devices, mechanical persistence, etc. --- Part 3.Logical information exchange mechanism. The purpose is to establish the logical data structure and registration process of the biometric identification system on the card. procedures, discovery services, operational procedures, and feedback mechanisms during biometric collection. Information Technology Card Biometric Identification System Part 1.Basic requirements

1 Scope

This document specifies the following. --- Functional architecture of the biometric identification system on the card; ---S1 type (in full compliance with GB/T 14916) and the definition of S2 type card biometric identification system implementation; --- the sensor type of the biometric system on the card; ---Minimum requirements for the biometric identification system on the card regarding the following. ● Discrimination (eg. accuracy criteria for biometric identification); ● interface; ● Power Options. The following aspects are outside the scope of this document. ---Store on the card and compare the biometric features outside the card; --- Workload collaborative realization; --- Detailed description and structure of individual components. This document gives a functional architectural description of the biometric system on the card, and describes how to utilize information from other standards Interface mapping of existing commands and data structures. This document applies to the design, production, testing and use of biometric identification cards.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 14916 Physical Characteristics of Identification Cards (GB/T 14916-2006, ISO /IEC 7810.2003, IDT) GB/T 16649.1 Identification card with contacts for integrated circuit cards - Part 1.Physical characteristics (GB/T 16649.1-2006, ISO /IEC 7816-1.1998, MOD) GB/T 16649.3 Identification Cards Integrated Circuit Cards with Contacts Part 3.Electrical Signals and Transmission Protocols (GB/T 16649.3- 2006, ISO /IEC 7816-3.1997, IDT) GB/T 16649.12 Identification Card Integrated Circuit Card Part 12.Card with Contacts USB Electrical Interface and Operating Procedures (GB/T 16649.12-2010, ISO /IEC 7816-12.2005, IDT) GB/T 30266 Information technology identification card biometric comparison (GB/T 30266-2013, ISO /IEC 24787. 2010, IDT) GB/T 41801.2 Information Technology Card Biometric Identification System Part 2.Physical Characteristics (GB/T 41801.2-2022, ISO /IEC 17839-2.2015, MOD) ISO /IEC 14443 (all parts) Cards and identification security devices Contactless proximity objects (Cardsandsecurityde- ISO /IEC 15693 (all parts) Cards and identification security devices Contactless proximity objects (Cardsandsecurityde- ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41801.1-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41801.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41801.1-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41801.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.