GB/T 41633.2-2022 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41633.2-2022: Insulating liquids - Determination of acidity - Part 2: Colourimetric titration
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41633.2-2022	219	Add to Cart	3 days	Insulating liquids - Determination of acidity - Part 2: Colourimetric titration	Valid

Similar standards

GB/T 42733   GB/T 31838.7   GB/T 36289.1   GB/T 41631   GB/T 41632   GB/T 41633.3   

Basic data

Standard ID: GB/T 41633.2-2022 (GB/T41633.2-2022)
Description (Translated English): Insulating liquids - Determination of acidity - Part 2: Colourimetric titration
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Word Count Estimation: 11,145
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41633.2-2022: Insulating liquids - Determination of acidity - Part 2: Colourimetric titration

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Insulating liquids - Determination of acidity - Part 2.Colourimetric titration ICS 29.040.01 CCSK15 National Standards of People's Republic of China Determination of acid value of insulating liquids Part 2.Colorimetric Titration (IEC 62021-2.2007, MOD) Published on 2022-07-01 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Method overview 2 5 Reagent 2 5.1 Distilled water 2 5.2 Titration reagent 2 5.3 Titration solvent 2 5.4 Potassium hydrogen phthalate 2 5.5 Hydrochloric acid standard solution 2 5.6 Basic Blue 6B Indicator 2 5.7 Cobalt nitrate solution 3 6 Instrument 3 7 Sampling 3 8 Measurement step 3 8.1 Overview 3 8.2 Calibration of potassium hydroxide standard solution 3 8.3 Blank titration 4 8.4 Sample titration 4 9 Result calculation 4 10 Precision4 10.1 General 4 10.2 Repeatability 4 10.3 Reproducibility 5 11 records 5

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 2 of GB/T 41633 "Determination of Acid Value of Insulating Liquids". GB/T 41633 has published the following parts. --- Part 2.Colorimetric titration; --- Part 3.Test methods for non-mineral insulating oils. This document is modified and adopted IEC 62021-2.2007 "Determination of acid value of insulating liquids - Part 2.Colorimetric titration". Compared with IEC 62021-2.2007, this document has made the following structural adjustments. --- In order to avoid the occurrence of suspension sections, 5.1 "distilled water", 8.1 "general rules" and 10.1 "general rules" were added respectively, and the subsequent clauses were extended accordingly; --- Deleted the note in Chapter 10 "Precision" of IEC 62021-2.2007, and incorporated its content into Table 1 and Table 2. The technical differences between this document and IEC 62021-2.2007 and their reasons are as follows. --- Modified the description of the relevant scope of IEC 62021-2.2007 to improve operability (see Chapter 1); ---According to the fact that this document is not cited, the normative reference IEC 60567 in IEC 62021-2.2007 is deleted; --- According to the actual needs of our country, the normative reference document GB/T 6682 has been added (see 5.1); --- According to actual needs, the relevant requirements for the preservation of potassium hydroxide standard solution are added (see 5.2); ---According to the actual application in my country, in addition to isopropanol, other suitable reagents are added as the titration solvent (see 5.3); --- For the convenience of operation and application, the "titration vessel", "stirrer" and "burette" in IEC 62021-2.2007 are adjusted to "conical flask" "Betette", "Analytical Balance" and "Beaker", and make specific requirements for them (see Chapter 6); ---Replace IEC 60475 (see Chapter 7) with the normatively quoted equivalent GB/T 41146 to adapt to my country's technical regulations parts to improve operability; --- Replace ISO 5725 (see Chapter 10) with the normative reference equivalent GB/T 6379 (all parts), to adapt to our the technical conditions of the country and improve the operability. The following editorial changes have been made to this document. --- Editorial changes were made to Chapter 10 "Precision" of IEC 62021-2.2007; --- Delete the informative appendix A of IEC 62021-2.2007 "Determination of acid value of electrical insulating oil by photometric titration". Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Insulating Materials (SAC/TC51). This document is drafted by. Electric Power Research Institute of Guangdong Power Grid Co., Ltd., China Southern Power Grid Power Technology Co., Ltd., Shenzhen Power Supply Bureau Co., Ltd., Guangdong Power Grid Co., Ltd. Dongguan Power Supply Bureau, State Grid Fujian Electric Power Co., Ltd. Electric Power Research Institute, Guilin Saimeng Testing Technology Co., Ltd., Guilin Electrical Apparatus Research Institute Co., Ltd., Guangdong Yisheng Testing Co., Ltd., Zhejiang Huiri Environmental Testing Co., Ltd. Co., Ltd., Xi'an Kaijinzhe Testing Co., Ltd., Guangdong Tehua Technology Co., Ltd., Shaanxi Jinyoubang Technology Co., Ltd., Guangdong Yidu Technology Co., Ltd. Co., Ltd., Jiangsu Meixida Technology Co., Ltd., Yiwu Quanyi Mould Industry Development Co., Ltd., Guangdong Chengxin Technology Co., Ltd., Zhejiang Ru Crystal Technology Co., Ltd., Zaozhuang Huitian Meiya Thermal Insulation and Energy Saving Building Materials Co., Ltd., Shaanxi Runzheng Testing Technology Co., Ltd. The main drafters of this document. Li Zhi, Qian Yihua, Wang Qing, Zhao Yaohong, Fu Qiang, Liu Shinian, Tang Nian, Lin Musong, Tang Feng, Wang Huarui, Lian Hongsong, Lai Yonghua, Zhao Jie, Liao Zhifei, Wu Zhuoting, Xiong Xuemei, Luo Chuanyong, Xiang Xiaoyun, Wang Cuilin, Wu Caichun, Zhang Yuanlin, Su Shiqiao, Li Shouying, Pi Kunlan, Jin Chenggao, Huang Jianwei, Xiao Benchong, Song Guangsheng, Deng Daicong.

Introduction

Health and Safety This document is not intended to address all safety concerns associated with its use, and it is the responsibility of the user to establish appropriate health and safety rules to ensure the applicability of this document. The mineral oils involved in this document should be properly protected for personal protection. Direct contact with the eyes may cause mild pain. Eyes, flush eyes with plenty of clean running water and seek medical attention in time. Some of the tests covered in this document may lead to hazardous situations. Please refer to the relevant guidance document. This document covers mineral oils, chemicals, and used sample containers. With regard to disposal attention to the impact on the environment, various measures should be taken. Precautions to prevent mineral oil from polluting the environment. The acid value determination standard of insulating liquid is widely used in the research and development, production, quality inspection, sales, acceptance and technical exchange of insulating liquid products. Setting this series of standards can guide the industry to more effectively carry out the detection and evaluation of the acid value of insulating liquids, and can improve the quality of insulating liquid products. and application reliability. The standard for the determination of acid value of insulating liquids is compiled in different parts. In order to maintain the basic consistency with the corresponding IEC standard, When preparing this series of standards, it is necessary to list different parts separately. GB/T 41633 describes the method standard for the determination of the acid value of insulating liquids, and is intended to consist of three parts. --- Part 1.Automatic potentiometric titration. The purpose is to determine the method and procedure for determining the acid value of insulating liquids by automatic potentiometric titration. --- Part 2.Colorimetric titration. The purpose is to determine the method and procedure for determining the acid value of insulating liquids by colorimetric titration. --- Part 3.Test methods for non-mineral insulating oils. The purpose is to identify unused and used electrical non-mineral insulating oils Two test methods for acid value. potentiometric titration and colorimetric titration. Determination of acid value of insulating liquids Part 2.Colorimetric Titration

1 Scope

This document describes the method and procedure for determining the acid value of insulating liquids by colorimetric titration. This document applies to both unused and used electrical insulating liquids. Note. In unused and used insulating liquids, acidic components include organic acids, phenolic compounds, oxidation products, resins, metal organic salts and additives Additives.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 6379 (all parts) Accuracy (correctness and precision) of measurement methods and results [ISO 5725 (all parts)] Note. GB/T 6379.1-2004 Accuracy (correctness and precision) of measurement methods and results - Part 1.General provisions and definitions (ISO 5725-1. 1994, IDT) GB/T 6379.2-2004 Accuracy (correctness and precision) of measurement methods and results - Part 2.Determining the repeatability and repeatability of standard measurement methods Basic methods of presentability (ISO 5725-2.1994, IDT) GB/T 6379.3-2012 Accuracy (correctness and precision) of measurement methods and results - Part 3.Intermediateness of precision of standard measurement methods Quantity (ISO 5725-3.1994, IDT) GB/T 6379.4-2006 Accuracy (Correctness and Precision) of Measurement Methods and Results - Part 4.Basis for Determining the Accuracy of Standard Measurement Methods This method (ISO 5725-4.1994, IDT) GB/T 6379.5-2006 Accuracy (correctness and precision) of measurement methods and results - Part 5.Determining the accuracy of standard measurement methods Alternative method (ISO 5725-5.1998, IDT) GB/T 6379.6-2009 Accuracy of Measurement Methods and Results (Correctness and Precision) Part 6.Practical Application of Accuracy Values (ISO 5725-6.1994, IDT) GB/T 6682 Analysis Laboratory Water Specifications and Test Methods (GB/T 6682-2008, ISO 3696.1987, MOD) GB/T 41146 Sampling method for insulating liquids (GB/T 41146-2021, IEC 60475.2011, IDT)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 acidity The amount of alkali (in KOH) required to titrate the sample to the neutralization point of Basic Blue 6B with the specified solvent. Note. The unit is milligrams per gram (mg/g). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41633.2-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41633.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41633.2-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41633.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.