GB/T 41154-2021 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41154-2021: Metallic materials - Multiaxial fatigue testing - Axial-torsional strain-controlled thermo-mechanical fatigue testing method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41154-2021	399	Add to Cart	4 days	Metallic materials - Multiaxial fatigue testing - Axial-torsional strain-controlled thermo-mechanical fatigue testing method	Valid

Similar standards

GB/T 43115   GB/T 43354   GB/T 43091   GB/T 45597   GB/T 45169   

Basic data

Standard ID: GB/T 41154-2021 (GB/T41154-2021)
Description (Translated English): Metallic materials - Multiaxial fatigue testing - Axial-torsional strain-controlled thermo-mechanical fatigue testing method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H22
Word Count Estimation: 21,287
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41154-2021: Metallic materials - Multiaxial fatigue testing - Axial-torsional strain-controlled thermo-mechanical fatigue testing method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic materials -- Multiaxial fatigue testing -- Axial-torsional strain-controlled thermo-mechanical fatigue testing method ICS 77:040:10 CCSH22 National Standards of People's Republic of China Multiaxial fatigue testing of metallic materials Axial-torsional strain-controlled thermomechanical fatigue test method Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Symbols and descriptions 2 5 Test device 4 6 Sample 5 7 Test procedure 8 8 Test results 14 9 Test report 15 Appendix A (Informative) Determination of Material Constants 16 Reference 17

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Iron and Steel Association: This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183): This document is drafted by: Beijing University of Technology, Institute of Metallurgical Industry Information Standards, AVIC Shenyang Aircraft Design Institute, China Aviation Industry Corporation of China Beijing Aeronautical Materials Research Institute, China Aviation Development Commercial Aviation Engine Co:, Ltd:, China Machinery Testing Equipment Co:, Ltd:, Shenzhen Wan Testing Inspection Equipment Co:, Ltd:, Shanghai Ocean High-end Equipment Functional Platform Co:, Ltd: The main drafters of this document: Shang Deguang, Li Daohang, Dong Li, Li Fangdai, Zuo Linxuan, Qu Linfeng, Liu Jianzhong, Chen Bo, Zhang Chengcheng, Yang Xiuguang, Huang Xing, Zhou Luhai, Sun Peng, Wang Hongbin, Hou Huining: Multiaxial fatigue testing of metallic materials Axial-torsional strain-controlled thermomechanical fatigue test method

1 Scope

This document specifies the test apparatus, test specimens, test procedures, and test procedures for multiaxial thermomechanical fatigue tests of metallic materials under axial-torsional strain control: Test results and test reports: This document applies to thin-walled metal tube specimens under constant axial mechanical strain cycling, constant shear strain cycling, and constant temperature cycling conditions , corresponding to any constant cyclic strain ratio, constant axial mechanical strain-shear strain phase difference, and constant axial mechanical strain-temperature phase difference The difference test: Note 1: The cycle times usually consider the category of low cycle fatigue, that is, the fatigue life Nf≤105: Note 2: The temperature of the test generally does not exceed 1200 ℃:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 228:1 Tensile Test of Metallic Materials Part 1: Test Method at Room Temperature GB/T 228:2 Tensile Test of Metallic Materials Part 2: High Temperature Test Method GB/T 6394 Metal Average Grain Size Determination Method GB/T 7314 Room temperature compression test method for metallic materials GB/T 10623 Terminology for Mechanical Properties Test of Metal Materials GB/T 12443 Torque Control Fatigue Test Method for Metallic Materials GB/T 16825:1 Inspection of static uniaxial testing machines Part 1: Inspection and calibration GB/T 25917:1 Uniaxial Fatigue Test System Part 1: Dynamic Force Calibration GB/T 33812 Fatigue Test of Metal Materials—Strain Controlled Thermomechanical Fatigue Test Method GB/T 40410 Axial-torsional strain control method for multiaxial fatigue test of metallic materials JJF1637 Inexpensive Metal Thermocouple Calibration Specification JJG141 Working precious metal thermocouple JJG269 Torsion testing machine JJG556 Axial Force Fatigue Testing Machine JJG617 Digital Temperature Indicating Regulator JJG762 Extensometer

3 Terms and Definitions

The terms and definitions defined in GB/T 10623, GB/T 33812 and GB/T 40410 and the following terms and definitions apply to this document: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41154-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41154-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41154-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41154-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.