GB/T 41116-2021 PDF EnglishUS$245.00 · In stock · Download in 9 seconds
GB/T 41116-2021: Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 41116-2021: Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT41116-2021 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.40 CCS J 33 GB/T 41116-2021 / ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018, IDT) ISSUED ON: DECEMBER 31, 2021 IMPLEMENTED ON: JULY 01, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Symbols... 5 5 Relation between quality levels and acceptance levels ... 5 6 Length and height of an indication ... 5 7 Acceptance levels ... 10 Bibliography ... 15ForewordThis document is drafted in accordance with GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents". This document, using translation method, is identical to ISO 15626:2018 "Non- destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels". China’s document which has a consistent correspondence with the international document normatively referenced in this document is as follows: - GB/T 12604.1-2020 Non-destructive testing - Terminology - Ultrasonic testing (ISO 5577:2017, MOD) The following editorial change has been made to this document: - Add footnotes (Clause 5). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by China Machinery Industry Federation. This document shall be under the jurisdiction of National Technical Committee 55 on Welding of Standardization Administration of China (SAC/TC 55). Drafting organizations of this document: Shanghai Research Institute of Materials, Guangzhou Special Pressure Equipment Inspection and Research Institute, Jiangsu Shengyang Fire Door Industry Co., Ltd., Jiangsu Frontier Electric Technology Co., Ltd., Shanghai Ship Engineering Quality Testing Co., Ltd., Zhejiang Kingland Pipeline & Technologies Co., Ltd., Beijing Zouzhan Lucheng Science and Technology Co., Ltd., Harbin Welding Institute Co., Ltd. Main drafters of this document: Ding Jie, Jiang Jiansheng, Li Maodong, Huang Yin, Ma Junpeng, Zhou Changzhi, Wang Lili, Wang Bin, Zhang Zaidong, Li Jianfeng, Zhai Lianna, Liu Jing, Su Jinhua, Ding Bing, Xiong Junbo. Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels1 ScopeThis document specifies acceptance levels for the time‑of‑flight diffraction technique (TOFD) of full penetration welds in ferritic steels from 6 mm up to 300 mm thickness which correspond to the quality levels of ISO 5817. The acceptance levels specified in this document are applicable to indications classified in accordance with ISO 10863.2 Normative referencesThe contents of the following documents, through normative references in this text, constitute indispensable provisions of this document. Among them, for dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document. ISO 5577 Non-destructive testing - Ultrasonic testing - Vocabulary3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 5577 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: - IEC Electropedia: http://www.electropedia.org/; - ISO Online browsing platform: https://www.iso.org/obp. 3.1 Embedded discontinuity Discontinuity within the volume of the material, separated from the surfaces. 3.2 Surface-breaking discontinuity Discontinuity connected to the scanning surface or bottom surface (opposite to the scanning surface).4 SymbolsFor the purposes of this document, the following symbols apply. h - height of an indication l - length of an indication t - nominal thickness of workpiece under test in accordance with construction drawing or dimension table5 Relation between quality levels and acceptance levelsThree different acceptance levels (levels 1, 2, and 3) are defined in this document. The relation between these acceptance levels and the quality levels as mentioned in ISO 5817 are given in Table 1.6 Length and height of an indication6.1 General The size of a discontinuity is described by the length and height of its indication. Length of an indication is defined by the difference of the x‑coordinates of the ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 41116-2021 be delivered?Answer: The full copy PDF of English version of GB/T 41116-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 41116-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41116-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 41116-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 41116-2021?A step-by-step guide to download PDF of GB/T 41116-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 41116-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
