GB/T 40937-2021 English PDF

US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40937-2021: Plastic piping systems - Determination of long-term strength for plastic composite pipes and fittings
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40937-2021	319	Add to Cart	3 days	Plastic piping systems - Determination of long-term strength for plastic composite pipes and fittings	Valid

Similar standards

GB/T 40911.2   GB/T 41010   GB/T 40911.3   GB/T 40935   

Basic data

Standard ID: GB/T 40937-2021 (GB/T40937-2021)
Description (Translated English): Plastic piping systems - Determination of long-term strength for plastic composite pipes and fittings
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Word Count Estimation: 17,119
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40937-2021: Plastic piping systems - Determination of long-term strength for plastic composite pipes and fittings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic piping systems - Determination of long-term strength for plastic composite pipes and fittings ICS 83.140.30 CCSG33 National Standards of People's Republic of China Plastic piping system plastic composite pipes and fittings Long-term strength measurement method (ISO 17456.2006, Plasticspipingsystems-Multilayerpipes- Released on 2021-11-26 2022-06-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Principle 3 5 Sample 3 6 Determination of long-term strength 3 7 Determination of the maximum pressure level MPR and the maximum working pressure MOP 7 8 Test report 7 Appendix A (Normative) Verification of Long-term Strength (Method I) 8 Appendix B (Informative) Flow chart for determining the long-term strength of P-type multilayer pipe and M-type multilayer pipe 9 Appendix C (Normative) The withstand voltage capability is based on the scaling factor of the reinforcement layer structure 10 Appendix D (informative) Procedure for determining the maximum pressure level and maximum working pressure 11

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document uses the redrafting method to modify and adopt ISO 17456.2006 "Determination of Long-term Strength of Multilayer Pipes in Plastic Piping Systems". Compared with ISO 17456.2006, this document has added 6.3, Chapter 7, Appendix C and Appendix D in the structure. The technical differences between this document and ISO 17456.2006 and the reasons are as follows. --- A third measurement method (Method Ⅲ) has been added to the scope to meet the application requirements of domestic thermoplastic composite pipe products; ---Regarding normative reference documents, this document has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace ISO 1167-1 and ISO 1167-2 with non-equivalent adopting international standard GB/T 6111 (see Chapter 5, 6.1.1, 6.2.1 and 6.3.1); ● Replace ISO 9080 with GB/T 18252 equivalent to the international standard (see 6.1.2, 6.1.4, 6.2.2, 6.2.3.3, 6.2.4.2, 6.3.2 and 6.3.3.3); ● Added reference to GB/T 19278-2018 (see Chapter 3); ---The following terms have been added or modified. composite pipe (see 3.1), reinforced thermoplastic composite pipe (see 3.5), approximate structure (see 3.6), Reinforcement layer standard size ratio (see 3.7), long-term strength (see 3.8), product family (see 3.13), product family representative (see 3.14), product list Body (see 3.15), maximum pressure rating (see 3.16), to facilitate the understanding and use of this document; ---Added c) the description of the principle of Method Ⅲ (see Chapter 4) to clarify the differences in the principles of the three methods; ---Added the assembly and its preparation method (see Chapter 5), used for the long-term performance test of the pipeline assembly; ---Added the third method of determination Ⅲ, the extrapolation method of specific temperature and pressure test (see 6.3) to adapt to the thermoplastic composite pipe Test needs; ---Added the method of determining the maximum pressure level MPR and the maximum working pressure MOP (see Chapter 7), which is the design of composite pipelines Provide reference with application; ---Added a normative appendix "Scaling factor based on the pressure resistance of the reinforcement layer structure" (see Appendix C), which is used to calculate the product list The test pressure of the physical confirmation test. This document has also made the following editorial changes. --- Modify the name of the document to "Measurement Method for Long-term Strength of Plastic Composite Pipes and Fittings of Plastic Piping System". --- Replace the "bar" in the international standard with the legal unit of measurement "MPa" in my country, and modify the formula (A.1) in Appendix A accordingly coefficient; ---Added an informative appendix "The procedure for determining the maximum pressure level and maximum working pressure" (see Appendix D). Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China National Light Industry Council. This document is under the jurisdiction of the National Plastic Products Standardization Technical Committee (SAC/TC48). This document was drafted by. China Petroleum & Chemical Corporation Beijing Research Institute of Chemical Industry, Zhejiang Weixing New Building Materials Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., Shanghai Baidie Pipe Industry Technology Co., Ltd., Cangzhou Mingzhu Plastic Co., Ltd., Hebei Yutong Special Rubber Hose Co., Ltd., Chengde Precision Testing Machine Co., Ltd., Shanghai Banglin Pipeline Engineering Technology Co., Ltd., China National Petroleum and Natural Gas Co., Ltd. Co., Ltd. Petrochemical Research Institute. The main drafters of this document. Sun Jin, Li Dazhi, Li Tongyi, Chaigang, Wang Dianliang, Cheng Debao, Wang Xinhua, Chu Jiangshun, Lu Xiaoying. Plastic piping system plastic composite pipes and fittings Long-term strength measurement method

1 Scope

This document specifies three methods for determining the long-term strength of plastic composite pipes and fittings. 1) Method Ⅰ---Calculation method; 2) Method Ⅱ---Multi-temperature withstand voltage test extrapolation method; 3) Method Ⅲ---Specific temperature withstand voltage test extrapolation method. This document applies to P-type multilayer pipes, M-type multilayer pipes and reinforced thermoplastic composite pipes (RTP pipes) and other plastic composite pipes. Used for pipelines composed of a single polymer stress design layer or a polymer outer sheath that does not participate in the stress design.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation (GB/T 6111-2018, ISO 1167-1.2006, ISO 1167-2.2006, ISO 1167-3.2007, ISO 1167-4.2007, NEQ) GB/T 18252 Plastic piping systems use extrapolation to determine the long-term hydrostatic strength of thermoplastic materials in the form of pipes (GB/T 18252-2020, ISO 9080.2012, IDT) GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves

3 Terms and definitions

The following terms and definitions defined in GB/T 19278-2018 apply to this document. 3.1 Composite pipe Pipes made of composite materials, and pipes with a multi-layer structure of different materials, and each structural layer shares the load. [Source. GB/T 19278-2018, 2.2.5] 3.2 Multilayer pipe The pipe wall is a pipe made of two or more layers of different materials or structures. [Source. GB/T 19278-2018, 2.2.4] 3.3 Multilayer Mpipe It is composed of a polymer material layer participating in the stress design and at least one layer or more of metal, inorganic fiber or organic fiber and other material reinforcement layers. Combined multi-layer tube. Note. The thickness of the polymer material layer accounts for more than 60% of the total wall thickness of the pipe (for example, PEX/Al/PEX). 3.4 P-type multilayer pipe multilayerPpipe The pipe wall is composed of solid-walled layers of multi-layer polymer materials, and at least two layers of materials are involved in the design of multi-layer pipes under compressive stress. Note. For example, PVC-C/PEX multilayer pipe can be regarded as P-type multilayer pipe. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40937-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40937-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40937-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40937-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.