GB/T 40905.1-2021 English PDFUS$1079.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40905.1-2021: Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1: Light microscopy method Status: Valid
Basic dataStandard ID: GB/T 40905.1-2021 (GB/T40905.1-2021)Description (Translated English): Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1: Light microscopy method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W04 Word Count Estimation: 54,562 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 40905.1-2021: Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1: Light microscopy method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1.Light microscopy method ICS 59.080.01 CCS W04 National Standards of People's Republic of China Textile cashmere, sheep wool, other special animals Quantitative analysis of fibers and their mixtures Part 1.Optical Microscopy (ISO 17751-1.2016, MOD) Released on 2021-10-11 2022-05-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ Introduction Ⅴ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Principle 2 5 Instruments, tools and reagents 2 5.1 Instrument 2 5.2 Tool 2 5.3 Reagent 2 6 Extraction and humidity control of laboratory samples 3 7 Preparation of the sample 3 7.1 Number of samples 3 7.2 Sample preparation method 3 7.3 Pretreatment of laboratory samples 4 8 Test Step 4 8.1 Use the objective micrometer to set the magnification 4 8.2 Fiber analysis and diameter measurement 4 9 Calculation and expression of test results 6 9.1 Calculation of test results of samples 6 9.2 Presentation of test results 6 10 Test report 6 Appendix A (Normative) Methods of sampling laboratory samples 7 Appendix B (informative) Decolorization of dark samples 8 Appendix C (informative) Surface morphological characteristics of commonly used animal fibers 9 Appendix D (normative) Common animal fiber density 46ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part of GB/T 40905 "Quantitative Analysis of Textile Cashmere, Sheep Wool, Other Special Animal Fibers and Their Mixtures" part 1.GB/T 40905 has released the following parts. ---Part 1.Optical microscopy. This document uses the redrafting law to amend and adopt ISO 17751-1.2016 "Textile Cashmere, Sheep Wool, Other Special Animal Fibers" Quantitative analysis of its mixture. Part 1.Optical microscopy. Compared with ISO 17751-1.2016, this document has some structural adjustments, as follows. ---Adjust the content related to sample pretreatment in 7.2.5.2 of ISO 17751-1.2016 to 7.3; ---Adjust all the contents of 9.2 of ISO 17751-1.2016 to 9.1; --- Chapter 10 has been added. The technical differences between this document and ISO 17751-1.2016 and the reasons are as follows. ---Regarding normative reference documents, this document has made adjustments with technical differences to adapt to China's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace ISO 139 (see 6.2) with GB/T 6529 modified to adopt international standards; ● Added reference to GB/T 10685-2007 (see 8.2.1.1, 8.2.1.2); ● Added reference to GSB02-2769 (see 8.2.2.1). --- The micrometer scale has been added to ensure that the detection errors caused by the detection instrument are reduced as much as possible (see 5.1.1, 5.1.2). --- Increased the number of samples to improve the accuracy of the test results (see 7.1). ---The preparation steps of the sample have been refined, and the relevant description of the preparation method of the test sample that can meet the testing requirements has been added to provide achievable Other options with the same result (see 7.2.1.3). ---According to the actual testing and calculation requirements, the relevant regulations for woven fabric samples with different warp and weft yarns should be taken, weighed and recorded respectively. To make relevant regulations more complete (see 7.2.4.1). --- The extraction step in 7.2.5.2 is adjusted to 7.3, and the operations of the same category are unified and classified. --- Increase the requirements and instructions for instrument calibration to reduce the risk of differences in test results (see 8.2.2.1). ---Added 9.2 "Expression of test results" to make the classification more reasonable and the expression more comprehensive (see 9.2). --- Added a chapter "Test Report" to make the content of the file more complete (see Chapter 10). ---Adjust the nature of Appendix A from "informative" to "normative" so that it can be used in conjunction with the actual testing. ---Adjust and increase the density value of some fibers to meet the needs of daily testing (see Appendix D). The following editorial changes have been made to this document. ---Added 3.1 note; ---The article number 5.3.1 in ISO 17751-1.2016 is deleted; ---Adjust the note of 9.1 in ISO 17751-1.2016 into paragraphs to modify the expression form of the normative appendix in the text; ---The decolorization method in Appendix B has been re-adjusted to the actual operation sequence and related description; ---Adjusted the presentation order of B.1 and added the article number of B.1.4; ---References have been deleted. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China National Textile and Apparel Council. This document is under the jurisdiction of the National Textile Standardization Technical Committee (SAC/TC209). Drafting organizations of this document. Inner Mongolia Ordos Resources Co., Ltd., China Textile Standard Inspection and Certification Co., Ltd., Shanghai Textile Group Group Testing Standard Co., Ltd., Beijing Hezhong Vision Technology Co., Ltd., Zhejiang Yilei Wool Textile Co., Ltd., Zhejiang Jiekai Industrial Co., Ltd., China Textile Standard (Shenzhen) Testing Co., Ltd., Jingtong Testing and Certification (Guangdong) Co., Ltd., Jinjiang China Textile Standard Testing Co., Ltd., Beijing Wool Textile Scientific Research Institute Inspection Center, Yiwu Hongxi Textile Co., Ltd. The main drafters of this document. Meng Linghong, Zhu Hong, Han Yuru, Zhang Hui, Chen Pei, Chen Siwei, Han Jing, Hongxia, Ma Haiyan, Gao Lizhong, Huang Zhihong, Shen Guoliang, Qiang Kaijie, Ouyang Jun, Dai Lingyun.IntroductionCashmere fiber is good in quality and expensive, but cashmere and other animal hair fibers such as sheep wool, yak wool, camel wool, etc. have similarities Because of its physical and chemical properties, early mixtures of them could not be accurately quantified by mechanical or chemical methods. And the appearance of these fibers The states are relatively close, and optical microscopes have always been used for identification. Research work on the correct identification of cashmere fibers has been ongoing. At present, the more widely used and mature technology is the microscope identification Methods, including optical microscope (LM) method and scanning electron microscope (SEM) method. SEM method and LM method have their own advantages. ---The advantage of the LM method is that the fiber medulla layer and pigment distribution can be observed. The disadvantage of the LM method is that it cannot clearly present one Some subtle surface structures; black samples need to be decolorized; improper decolorization will affect the identification of fibers. ---SEM method and LM method have complementary advantages and disadvantages, so some special types of fibers need to be identified by SEM method. For some samples that are difficult to determine, it is necessary to combine optical microscopy and scanning electron microscopy, and use their respective advantages to perform Identify. Practice has proved that the accuracy of the quantitative analysis of the content using this method and the rich detection experience of the inspectors, that is, the appearance of various animal fibers The understanding and familiarity of morphology have a lot to do with it. Therefore, in addition to the text description, this document also gives details of the different types of animal fibers. The picture of the surface morphology is for the reference of the inspector. GB/T 40905 "Textile cashmere, sheep wool, other special animal fibers and their mixtures quantitative analysis" is cashmere, sheep The quantitative analysis standards for wool, other special animal fibers and their mixtures are planned to consist of two parts. ---Part 1.Optical microscope method; ---Part 2.Scanning electron microscopy. Textile cashmere, sheep wool, other special animals Quantitative analysis of fibers and their mixtures Part 1.Optical Microscopy1 ScopeThis document specifies the qualitative and quantitative analysis of cashmere, sheep wool, other special animal fibers and their mixtures using an optical microscope. Analysis method. This document applies to cashmere, sheep wool, other special animal fibers and their mixtures, including loose fibers, semi-finished products and finished products.2 Normative referencesThe contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 6529 Standard atmosphere for textile humidity control and testing (GB/T 6529-2008, ISO 139.2005, MOD) GB/T 10685-2007 Wool fiber diameter test method projection microscope method GSB02-2769 Cashmere Fineness Standard Sample3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Specialtyanimalfibre In addition to sheep wool fiber obtained from sheep, a general term for keratin fibers obtained from other animals. Note. Special animal fibers include cashmere, camel hair, yak hair, mohair, angora rabbit hair, alpaca hair, etc. 3.2 Lightmicroscope An optical instrument that uses visible light as an illuminating light source and uses optical principles to magnify images. Note. The optical microscopes used for fiber identification mainly include projection microscopes and microscopic image analyzers. A microscope equipped with a micrometer scale can also be used. 3.3 Scale The stratum corneum covering the surface of animal hair fibers. 3.4 Scale density scalefrequency The number of scales (3.3) per unit length along the fiber axis. 3.5 Scale thickness scaleheight The height between the scale (3.3) and the axial edge of the fiber. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40905.1-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40905.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 40905.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40905.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |