GB/T 40435-2021 English PDFUS$679.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40435-2021: Technical specifications for substation data communication gateway Status: Valid
Basic dataStandard ID: GB/T 40435-2021 (GB/T40435-2021)Description (Translated English): Technical specifications for substation data communication gateway Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F21 Word Count Estimation: 34,319 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 40435-2021: Technical specifications for substation data communication gateway---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical specifications for substation data communication gateway ICS 29.240.01 F21 National Standards of People's Republic of China Technical specification for data communication gateway machine in substation Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Abbreviations 2 5 General requirements 2 6 Functional requirements 3 6.1 Basic data function 3 6.2 Remote control 3 6.3 Communication status monitoring 4 6.4 Time synchronization 4 6.5 Direct Alarm Transmission 4 6.6 Remote browsing 4 6.7 Device Management 4 6.8 Operation and maintenance 5 7 Performance requirements 5 7.1 Basic performance 5 7.2 Insulation performance 5 7.3 Electromagnetic compatibility 6 7.4 Mechanical properties 10 7.5 Continuous power-on stability 11 7.6 Reliability 11 8 Other technical requirements 11 8.1 Environmental conditions 11 8.2 Power supply conditions 11 8.3 Hardware 11 8.4 Software 12 8.5 Structure appearance 12 9 Test method 12 9.1 Test conditions 12 9.2 Test system 12 9.3 Function test 15 9.4 Performance test 16 9.5 Other technical requirements test 19 Appendix A (normative appendix) Total accident signal reset processing method 20 Appendix B (Normative Appendix) Log File Definition 21 Appendix C (normative appendix) Telecontrol configuration description file definition 23ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This standard was proposed by the China Electricity Council. This standard is under the jurisdiction of the National Power System Management and Information Exchange Standardization Technical Committee (SAC/TC82). Drafting organizations of this standard. State Grid Electric Power Research Institute Co., Ltd., State Grid NARI Technology Co., Ltd., State Grid Jiangsu Electric Power Company Electric Power Research Institute Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd., China Electric Power Research Institute Co., Ltd., State Grid Co., Ltd. State Power Dispatching Control Center, China Southern Power Grid Power Dispatching Control Center, State Grid Jilin Province Electric Power Co., Ltd., State Grid Zhejiang Electric Power Co., Ltd., Xuchang Kaipu Testing Technology Co., Ltd., Nanjing Nanrui Relay Electric Co., Ltd., Xu Ji Group Co., Ltd., Changyuan Shenrui Relay Automation Co., Ltd., State Grid Beijing Electric Power Co., Ltd. The main drafters of this standard. Zhang Haibin, Zhou Bin, Zhang Qibing, Li Jinsong, Wang Yongfu, Zhang Ximing, Dou Renhui, Lu Tianjian, Chen Dehui, Yang Song, Du Qiwei, Ni Yimin, Huang Jian, Zhang Ran, Peng Zhiqiang, Sun Yimin, Wang Haifeng, Hou Yu, Wang Jing, Kong Honglei. Technical specification for data communication gateway machine in substation1 ScopeThis standard specifies the functional requirements, performance requirements, other technical requirements and test methods of substation data communication gateway machines. This standard applies to the design, equipment development, testing and acceptance of data communication gateways in substations with voltage levels of 35kV and above. Power plant related data communication gateway machines can be implemented by reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 2423.1 Environmental testing of electrical and electronic products Part 1.Test method Test A. Low temperature GB/T 2423.2 Environmental testing of electric and electronic products Part 2.Test method Test B. High temperature GB/T 13729-2019 Telecontrol terminal equipment GB/T 15153.2-2000 Telecontrol equipment and systems Part 2.Working conditions Part 2.Environmental conditions (climate, mechanical and Other non-electrical influence factors) GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test GB/T 17626.6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity GB/T 17626.8 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test GB/T 17626.9 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test GB/T 17626.10 Electromagnetic compatibility test and measurement technology Damped oscillation magnetic field immunity test GB/T 17626.11 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test GB/T 17626.12 Electromagnetic compatibility test and measurement technology Ring wave immunity test GB/T 17626.29 Electromagnetic compatibility test and measurement technology DC power input port voltage sag, short-term interruption and voltage change Modified immunity test DL/T 476 Power system real-time data communication application layer protocol DL/T 634.5101 Telecontrol Equipment and System Part 5-101.Supporting Standards for Basic Telecontrol Tasks of Transmission Protocol DL/T 634.5104 Telecontrol equipment and system Part 5-104.Transmission protocol adopts standard transmission protocol subset DL/T 667 Telecontrol Equipment and System Part 5.Transmission Protocol Part 103.Supporting Standards for Information Interface of Relay Protection Equipment DL/T 719 Telecontrol Equipment and System Part 5.Transmission Protocol Part 102.Power System Electric Energy Cumulative Transmission Matching standard DL/T 860 (all parts) Power automation communication network and system DL/T 1171 General data model naming specification for power grid equipment DL/T 1403 Technical Specification for Intelligent Substation Monitoring System IEC 62361-2 Power system management and long-term interoperability of information exchange Part 2.Monitoring and data acquisition (SCADA) End-to-end quality code (Powersystemsmanagementandassociatedinformationexchange-Interop- ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40435-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40435-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 40435-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40435-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
