GB/T 39515.1-2020 English PDF

US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39515.1-2020: Agricultural and forestry machinery. Environmental requirements for sprayers - Part 1: General
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39515.1-2020	184	Add to Cart	3 days	Agricultural and forestry machinery. Environmental requirements for sprayers - Part 1: General	Valid

Similar standards

GB/T 24674   GB/T 33006   GB/T 25409   GB/T 45789   GB/T 39515.2   GB/T 39515.4   

Basic data

Standard ID: GB/T 39515.1-2020 (GB/T39515.1-2020)
Description (Translated English): Agricultural and forestry machinery. Environmental requirements for sprayers - Part 1: General
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B91
Classification of International Standard: 65.060.40
Word Count Estimation: 10,167
Date of Issue: 2020-12-14
Date of Implementation: 2021-07-01
Quoted Standard: ISO 4254-6-2009; ISO 5681-1992; ISO 10625; ISO 19732-2007
Adopted Standard: ISO 16119-1-2013, IDT
Regulation (derived from): National Standard Announcement No. 28 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the general requirements for the design and performance of sprayers (see ISO 5681 definition) to minimize potential environmental pollution risks during the use of sprayers, including risks that manufacturers can foresee. This standard also specifies the requirements for identifying the sprayer and certain components and the minimum requirements for the contents of the instructions for use. This standard applies to all types of sprayers except knapsack sprayers in agriculture, horticulture, forestry and other fields. This standard is used together with every other part of GB/T 39515. The other parts specify specific requirements for specific types of sprayers (see Appendix A). This standard does not contain safety aspects. For safety requirements, see ISO 4254-6 . This standard does not apply to sprays produced before its release date

GB/T 39515.1-2020: Agricultural and forestry machinery. Environmental requirements for sprayers - Part 1: General

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Agricultural and Forestry Machinery Environmental Requirements for Sprayers Part 1: General Requirements) ICS 65:060:40 B91 National Standards of People's Republic of China Environmental requirements for agricultural and forestry machinery sprayers Part 1: General requirements Part 1:General (ISO 16119-1:2013, IDT) 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

GB/T 39515 "Environmental Requirements for Agricultural and Forestry Machinery Sprayers" is divided into 4 parts: ---Part 1: General requirements; ---Part 2: Horizontal boom sprayer; ---Part 3: Sprayers for shrubs and trees crops; ---Part 4: Stationary and semi-mobile sprayers: This part is Part 1 of GB/T 39515: This section was drafted in accordance with the rules given in GB/T 1:1-2009: The translation method used in this part is equivalent to ISO 16119-1:2013 Environmental Requirements for Agricultural and Forestry Machinery Sprayers Part 1: General Requirements begging": The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows: ---GB 10395:6-2006 Agricultural and forestry tractors and machinery safety technical requirements Part 6: Plant protection machinery (ISO 4254-6:1995,MOD) ---GB/T 18676-2009 Plant protection machinery sprayer (applier) nozzle identification color coding (ISO 10625:2005, IDT) ---GB/T 20085-2006 Plant protection machinery vocabulary (ISO 5681:1992, MOD) ---GB/T 32243-2015 Plant protection machinery sprayer (filter) filter identification color coding (ISO 19732: 2007, IDT) This part was proposed by China Machinery Industry Federation: This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201): Drafting organizations of this section: Nanjing Woyang Machinery Technology Co:, Ltd:, Wuhu Duojia Agricultural Technology Co:, Ltd:, China Rural Technology Development Development Center, China Academy of Agricultural Mechanization Science, National Agricultural Technology Extension Service Center: The main drafters of this section: Zhang Ruihong, Shao Changbing, Hu Xiaolu, Yang Xuejun, Zhou Haiyan, Zhao Qing, Xi Xiaobo, Dong Xiang, Zhang Tie, Yan Herong, Song Xinyun, Jin Chen, Chen Junbao:

Introduction

When spraying pesticides, it is particularly important to consider biological, ecological and economic factors: For this reason, the comprehensive knowledge of spraying liquid medicine (including its use Limitations of use) and a proper sprayer are necessary: GB/T 39515 specifies the minimum requirements for sprayers, with special emphasis on minimizing potential environmental pollution risks, mainly focusing on The following aspects: ---Deposition and distribution of liquid medicine on the target; --- Minimize the inadvertent spread of liquid medicine to the surrounding environment; ---Improvement in the use and operation of plant protection machinery: Environmental requirements for agricultural and forestry machinery sprayers Part 1: General requirements

1 Scope

This part of GB/T 39515 specifies general requirements for the design and performance of sprayers (see ISO 5681 definition) to minimize the use of The potential environmental pollution risks in the process of using sprayers include the risks that the manufacturer can foresee: This part also specifies the identification of sprayers and their Requirements for certain components and minimum requirements for the contents of the manual: This section applies to all types of sprayers except for backpack sprayers in agriculture, horticulture, forestry and other fields: This part and Each other part of GB/T 39515 is used together, and the other parts specify the specific requirements for a specific type of sprayer (see Appendix A): This section does not contain safety aspects: For safety requirements, see ISO 4254-6: Note: ISO :19932 gives the safety and environmental requirements of knapsack sprayers: This section does not apply to sprayers manufactured before the release date:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: ISO 4254-6:2009 Agricultural and forestry tractors and machinery safety technical requirements Part 6: Plant protection machinery (Agricultural machinery-Safety-Part 6: Sprayersandliquidfertilizerdistributors) ISO 5681:1992 Equipmentforcropprotection-Vocabulary (Equipmentforcropprotection-Vocabulary) ISO 10625 Plant protection machinery sprayer (applier) spray nozzle color coding (Equipmentforcropprotection- Sprayernozzles-Colourcodingforidentification) ISO 19732:2007 Plant protection machinery sprayer (filter) filter identification with color coding (Equipmentforcroppro- tection-Sprayerfilters-Colourcodingforidentification)

3 Terms and definitions

The terms and definitions defined in ISO 5681 apply to this document:

4 Technical requirements

4:1 General requirements The sprayer and its parts should be reliable, and its design should conform to the intended use described in the manual to minimize potential environmental pollution risk: The sprayer design should be able to ensure the safe operation of the operator during the operation, and the spraying of pesticides should be stopped immediately at the operating position: 4:2 Inspection You can connect the necessary measuring instruments to the sprayer to check its working conditions, for example, to provide suitable ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39515.1-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39515.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39515.1-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39515.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.