GB/T 39483.2-2020 English PDF
Basic dataStandard ID: GB/T 39483.2-2020 (GB/T39483.2-2020)Description (Translated English): Rubber and plastics injection moulding machine - Interface - Part 2: Data exchange interface Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G95 Classification of International Standard: 71.120; 83.200 Word Count Estimation: 354,399 Date of Issue: 2020-12-14 Date of Implementation: 2021-11-01 Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 39483.2-2020: Rubber and plastics injection moulding machine - Interface - Part 2: Data exchange interface---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Rubber Plastic Injection Molding Machine Interface Part 2: Data Exchange Interface) ICS 71:120;83:200 G95 National Standards of People's Republic of China Rubber plastic injection molding machine interface Part 2: Data Exchange Interface 2020-12-14 release 2021-11-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3:1 Terms and definitions 1 3:2 Abbreviations 7 4 Basic agreement 8 4:1 Modbus 8 4:1:1 General overview 8 4:1:2 General Specification 9 4:2 OPCDA 14 4:2:1 Basic Principles of Data Access 14 4:2:2 Overview of OPC 14 4:2:3 OPCDA scope of application 16 4:2:4 General OPCDA architecture and composition 16 4:2:5 Companion specification of OPCDA data access architecture 17 4:2:6 Overview of objects and interfaces 17 4:2:7 Server address space and configuration 18 4:2:8 Application-level server and network node selection 19 4:2:9 Synchronization and serial issues 19 4:2:10 Permanent storage process 19 4:3 OPCUA 19 4:3:1 OPCUA Basic Protocol 19 4:3:2 OPCUA common data type 20 5 Data interface 84 5:1 MES interface 84 5:1:1 OPCDA MES interface 84 5:1:2 OPCUA's MES interface 125 5:2 Peripheral device interface 139 5:2:1 Mold temperature controller interface 139 5:2:2 Chiller interface 171 5:2:3 Feeder interface 187 5:2:4 Dryer interface:199 5:2:5 Manipulator interface 212 5:2:6 Magnetic template interface 253 5:2:7 Die changer interface 264 5:2:8 Hot runner device interface 277 5:2:9 LSR feeding system interface 298 5:2:10 Energy consumption meter interface 314 5:2:11 Two-color machine turntable interface 332 Appendix A (informative appendix) OPCDA data type 344 Appendix B (informative appendix) OPCUA data type 346ForewordGB/T 39483 "Rubber Plastic Injection Molding Machine Interface" is divided into two parts: ---Part 1: Mechanical and electrical interface; ---Part 2: Data exchange interface: This part is Part 2 of GB/T 39483: This section was drafted in accordance with the rules given in GB/T 1:1-2009: This part was proposed by the China Petroleum and Chemical Industry Federation: This part is under the jurisdiction of the National Rubber and Plastic Machinery Standardization Technical Committee (SAC/TC71): Drafting organizations of this section: Haitian Plastic Machinery Group Co:, Ltd:, Borch Intelligent Equipment Co:, Ltd:, Guangdong Yizumi Precision Injection Technology Co:, Ltd:, Yuyao Huatai Rubber and Plastic Machinery Co:, Ltd:, Tairui Machinery Co:, Ltd:, Donghua Machinery Co:, Ltd:, Ningbo Lijin Machinery Co:, Ltd: Company, Ningbo Haixing Machinery Manufacturing Co:, Ltd:, Beijing Rubber Industry Research and Design Institute Co:, Ltd:, National Plastic Machinery Product Quality Supervision and Inspection Inspection Center, China Plastic Machinery Industry Association: The main drafters of this section: Jiao Xiaolong, Zhuo Hongzhi, Huang Turong, Niu Jianwen, Ge Fujiong, Wei Jianhong, Yan Houming, Shi Zeman, Chen Kaiding, He Cheng, Wang Gengxin, Zheng Ji, Li Chunyan: Rubber plastic injection molding machine interface Part 2: Data Exchange Interface1 ScopeThis part of GB/T 39483 specifies the basic protocol and data interface for rubber plastic injection molding machines, covering the following content: ---Terms, definitions and abbreviations: ---Basic protocol, including Modbus basic protocol, OPCDA basic protocol, OPCUA basic protocol and general data Types of: ---Data interface, including data interface between injection molding machine and MES based on OPCDA basic protocol; OPC Data interface between injection molding machine and MES based on UA basic protocol; Note based on Modbus basic protocol Data interface between injection molding machine and peripheral device; injection molding machine and peripheral device based on OPCUA basic protocol Data interface between: Peripheral devices include mold temperature controller, chiller, feeder, dryer, manipulator, magnetic template, mold changer, Hot runner device, LSR (liquid silica gel) feeding system, energy consumption meter, two-color machine turntable: This section applies to all types of rubber plastic injection molding machines:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 19582:2 Industrial automation network specification based on Modbus protocol Part 2: Modbus protocol in serial link Implementation guide on GB/T 19582:3 Industrial automation network specification based on Modbus protocol Part 3: Modbus protocol in TCP/IP Implementation guide on GB/T 33863:1 OPC Unified Architecture Part 1: Overview and Concepts GB/T 33863:2-2017 OPC Unified Architecture Part 2: Security Model GB/T 33863:3 OPC Unified Architecture Part 3: Address Space Model GB/T 33863:4 OPC Unified Architecture Part 4: Service GB/T 33863:5 OPC Unified Architecture Part 5: Information Model GB/T 33863:6 OPC Unified Architecture Part 6: Mapping GB/T 33863:7 OPC Unified Architecture Part 7: Profile GB/T 33863:8 OPC Unified Architecture Part 8: Data Access 3 Terms, definitions and abbreviations 3:1 Terms and definitions The terms and definitions defined in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 and the following terms and definitions apply to this document: for For ease of use, some terms and definitions in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 are repeatedly listed below: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39483.2-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39483.2-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 39483.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39483.2-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
