GB/T 3871.5-2022 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3871.5-2022: Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters Status: Valid GB/T 3871.5: Historical versions
Basic dataStandard ID: GB/T 3871.5-2022 (GB/T3871.5-2022)Description (Translated English): Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T61 Word Count Estimation: 13,180 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 3871.5-2022: Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Agricultural tractors - Test procedures - Part 5.Turning and clearance diameters ICS 65.060.10 CCST61 National Standards of People's Republic of China Replacing GB/T 3871.5-2006 Agricultural tractor test procedures Part 5.Turning circles and passing circle diameters Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 5 of GB/T 3871 "Test Procedures for Agricultural Tractors". GB/T 3871 has published the following parts. --- Part 1.General requirements; --- Part 2.Measurement of parameters of the whole machine; --- Part 3.Power take-off shaft power test; --- Part 4.Lifting capacity of rear three-point hitch; --- Part 5.Turning circle and passing circle diameter; --- Part 6.Determination of braking performance of agricultural and forestry vehicles; --- Part 7.The driver's field of vision; --- Part 8.Noise measurement; --- Part 9.Traction power test; --- Part 10.Low temperature starting; --- Part 11.High temperature performance test; --- Part 12.Use test; --- Part 13.Measurement of exhaust smoke; --- Part 14.Partial power output power take-off shaft for non-mechanical transmission; --- Part 15.Centroids; --- Part 16.Determination of shaft power; --- Part 17.Engine air filters; --- Part 18.Hydraulic power at the interface between the tractor and the implement; --- Part 19.Wheeled tractor steering performance; --- Part 20.Turbulence test; --- Part 21.Stability. This document replaces GB/T 3871.5-2006 "Test Procedures for Agricultural Tractors - Part 5.Steering Circle and Diameter of Passing Circle", and Compared with GB/T 3871.5-2006, in addition to structural adjustment and editorial changes, the main technical changes are as follows. --- Changed the scope (see Chapter 1, Chapter 1 of the.2006 edition); --- Changed the definition of agricultural tractor (see 3.1, 2.1 of the.2006 edition); --- Deleted the content about the gauge [see 3.2, 4.2.2, Chapter 7 f), Appendix A, 2.2, 4.2.2 of the.2006 edition, Chapter 6 f), appendix Record A]; --- Changed the definition of wheelbase (see 3.3, 2.3 of the.2006 edition); --- Deleted the definition of the wheelbase of the tractor with rear track (see 3.3, 2.3 of the.2006 edition); --- Added an alternative test satellite positioning system device (see 4.3); --- Increase the factors affecting the accuracy of the satellite positioning system during measurement of the satellite positioning system, in order to ensure the accuracy of the linear measurement (see 5.1); --- Changed the method for determining the mark point of the turning circle (see 6.1.1.2, 5.1.2 of the.2006 edition); --- Increased the satellite positioning system replacement test method (see 6.1.2); --- Added specific applicable objects, with operability (see 6.3, 6.4, 5.3, 5.4 of the.2006 edition); --- Changed the maximum operating force exerted on the brake pedal (see 6.3, 5.3 of the.2006 edition). This document is modified and adopted ISO 789-3.2015 "Test Procedures for Agricultural Tractors - Part 3.Turning Circle and Passing Circle Diameter". This document adds a chapter "Normative References". The technical differences between this document and ISO 789-3.2015 and their reasons are as follows. --- Changed the scope (see Chapter 1) to meet industry requirements; --- Changed the definition of "agricultural tractor" (see 3.1) to be consistent with the definition of "agricultural tractor" in ISO 12934.2021; --- Deleted the content about the gauge [see ISO 789-3.2015 2.2, 4.2.2, Chapter 6 f), A.2], which is related to the scope of application of the standard meets the; --- Changed the definition of wheelbase (see 3.3) to make the definition more scientific; --- If the text involves GPS, change "GPS" to "Satellite Positioning System", and use letters to identify it as "GNSS" [see 4.3, 5.1, 6.1.2, Figure 5, formula (4), formula (5)], expand the scope of application of satellite positioning systems (such as Beidou, GPS); --- Changed the method for determining the marking point of the turning circle (see 6.1.1.2), and the marking method is more clear; --- Added specific applicable objects (see 6.3, 6.4), with operability; --- Changed the maximum operating force applied on the brake pedal (see 6.3) to make the maximum operating force more maneuverable; --- Changed the symbol definition (see Figure 5), in order to ensure that the symbol definition is consistent with the illustration; --- Changed the nature of Appendix A, from informative to normative, to make the test report format more standardized. The following editorial changes have been made to this document. --- In order to harmonize with existing standards, the standard name is changed to "Agricultural Tractor Test Procedures Part 5.Turning Circles and Passing Circles Straight" path"; --- Changed the "Note" in "Terms and Definitions"; --- Added references. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Tractor Standardization Technical Committee (SAC/TC140). This document is drafted by. Luoyang Xiyuan Vehicle and Power Inspection Institute Co., Ltd. The main drafters of this document. Zhang Guoying, Qiao Jianxiang, Chen Song, Shen Yanbin, Sun Panpan. This document was first published in 1983, revised for the first time in.1993, and revised for the second time in.2006, this time being the third revision.IntroductionThe test method is an important means to test the performance of the product. Different test methods yield different test results. The purpose of the standard is to achieve a standard, a test, and industry-wide recognition. As the power source of mobile agricultural machinery, tractors work The environment is harsh and involves many requirements on personal safety and environmental hygiene, and a series of test methods are required to determine whether its performance meets the requirements. Check it out. In this regard, my country has established a complete set of tractor tests by studying and referring to international standards and foreign advanced standards. method standard. GB/T 3871 aims to establish the test procedures for checking the performance indicators of tractors, and 21 parts have been issued. --- Part 1.General requirements; --- Part 2.Measurement of parameters of the whole machine; --- Part 3.Power take-off shaft power test; --- Part 4.Lifting capacity of rear three-point hitch; --- Part 5.Turning circle and passing circle diameter; --- Part 6.Determination of braking performance of agricultural and forestry vehicles; --- Part 7.The driver's field of vision; --- Part 8.Noise measurement; --- Part 9.Traction power test; --- Part 10.Low temperature starting; --- Part 11.High temperature performance test; --- Part 12.Use test; --- Part 13.Measurement of exhaust smoke; --- Part 14.Partial power output power take-off shaft for non-mechanical transmission; --- Part 15.Centroids; --- Part 16.Determination of shaft power; --- Part 17.Engine air filters; --- Part 18.Hydraulic power at the interface between the tractor and the implement; --- Part 19.Wheeled tractor steering performance; --- Part 20.Turbulence test; --- Part 21.Stability. The purpose of the test procedures and standards is to specify uniform test procedures and methods. Began the research work of tractor test method standard. In 1983, the tractor test method standard was first issued, and then referenced to international standards. The second and third editions were released in.1993 and.2006, respectively. With the continuous progress of tractor technology and the development of foreign trade, new needs and new proposals are constantly being generated. The first edition of ISO 789-3 was formulated in 1982.my country adopted this version to formulate GB/T 3871.5-1993 and ISO 789-3 in.1993. After completing the revision, my country adopted this version to formulate GB/T 3871.5-2006.In.2015, ISO 789-3 was revised again. In view of this, there are indeed It is necessary to revise and improve GB/T 3871.5 to continuously adapt to the new demands of tractor technology development. This revision of GB/T 3871.5 is mainly Consider new structural types of tractors and new detection technology, so as to improve test efficiency and standard adaptability, and better serve technical development. to promote trade, exchanges and technical cooperation. Agricultural tractor test procedures Part 5.Turning circles and passing circle diameters1 ScopeThis document specifies a test method for determining the diameter of the steering circle and passing circle for agricultural wheeled tractors. This document applies to agricultural wheeled tractors (hereinafter referred to as. tractors) with at least two axles and pneumatic tires. Other types and uses The wheeled tractor can also be used for reference.2 Normative referencesThere are no normative references in this document.3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 agricultural tractor agriculturaltractor Wheeled, tracked or wheel-tracked self-propelled agricultural vehicles with at least two axles, capable of hauling, pushing, carrying, providing drive The power of the implement, the function of pulling agricultural trailers and agricultural implements, or a combination of the above functions, for agricultural (including forestry) operations, can be equipped with loading platform. Note. The maximum design speed of agricultural vehicles is not less than 6km/h, and can be equipped with more than one seat. [Source. ISO 12934.2021, 3.2.1] 3.2 track The tractor is in the state of horizontal and straight driving, parallel to the longitudinal center plane of the tractor and passing through the center plane of the two grounded tires between the two planes. distance (see Figure 1). Note. If the tractor is equipped with twin tires, the wheel spacing is the distance between the two planes passing through the center plane of the twin tires. Figure 1 Wheel base of wheeled tractor ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3871.5-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 3871.5-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3871.5-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3871.5-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3871.5-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3871.5-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
