GB/T 38001.53-2024 English PDFUS$514.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38001.53-2024: Flexible display devices - Part 5-3: Visual assessment of image quality and defects Status: Valid
Basic dataStandard ID: GB/T 38001.53-2024 (GB/T38001.53-2024)Description (Translated English): Flexible display devices - Part 5-3: Visual assessment of image quality and defects Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L53 Classification of International Standard: 31.120 Word Count Estimation: 26,293 Date of Issue: 2024-04-25 Date of Implementation: 2024-08-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38001.53-2024: Flexible display devices - Part 5-3: Visual assessment of image quality and defects---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 31:120 CCSL53 National Standards of People's Republic of China Flexible display devices Part 5-3: Visual evaluation method qualityanddefects Released on 2024-04-25 2024-08-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Visual evaluation procedure 2 4:1 Overview 2 4:2 Display settings and driving conditions 3 4:3 Visual evaluation observer 3 4:4 Environmental conditions for visual assessment 3 4:5 Observation geometry 4 5 Test pattern (test signal) 5 5:1 Overview 5 5:2 Full Screen Pattern 6 5:3 Periodic Patterns 7 5:4 Tone and Color Gradient Patterns 8 5:5 Crosstalk Test Figure 10 5:6 Electro-optical defect test pattern 11 5:7 Static Resolution Test Pattern 11 5:8 Natural and synthetic patterns 12 6 Visual evaluation during and after stress testing 12 6:1 General 12 6:2 Number of replicate and reference samples tested 12 6:3 Visual evaluation procedure after environmental stress 12 6:4 Visual evaluation procedure after mechanical stress 12 7 Criteria 12 7:1 General 12 7:2 Judgment of using limit samples 13 7:3 Grading using a set of grade samples 13 7:4 Preparation of limit samples or a group of graded samples 13 7:5 Judgment of unlimited samples or a group of graded samples 14 7:6 Evaluation using neutral density filters 14 7:7 Evaluation methods for mechanical defects 14 8 Report 14 8:1 Reporting requirements14 8:2 Recommended report format 15 Appendix A (Informative) Rating of Moire Defects Using Neutral Density Filters 16 Reference 17 Figure 1 Observation geometry of flexible display devices Figure 2 Test pattern example 7 Figure 3 Example of periodic pattern 8 Figure 4 Example of test pattern for tone and color reproduction 9 Figure 5 Example of a test pattern displayed on the screen of a deformed test sample 10 Figure 6 Crosstalk pattern of the diagonal window with gray background at position P0 10 Figure 7 Monoscopic pattern used to evaluate ultra-high-definition screens11 Table 1 Example of input signal level series for 8-bit system 6 Table 2 Other input signal levels for 8-bit systems 6 Table A:1 Example of using neutral density filters to grade moiré defects16ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is part 5-3 of GB/T 38001 Flexible Display Devices: GB/T 38001 has published the following parts: --- Part 1-1: Terminology and text symbols; --- Part 5-1: Test methods for optical properties; --- Part 5-2: Test methods for optical performance of non-portable curved display devices; --- Part 5-3: Visual evaluation method; --- Part 6-1: Mechanical stress test methods; --- Part 6-2: Environmental test methods: This document is equivalent to IEC 62715-5-3:2017 "Flexible display devices Part 5-3: Visual evaluation method": Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This document is under the jurisdiction of the National Technical Committee for Standardization of Electronic Display Devices (SAC/TC547): This document was drafted by: Kunshan Guoxian Optoelectronics Co:, Ltd:, China Electronics Technology Standardization Institute, Zhejiang Zhiling Technology Co:, Ltd:, BOE Technology Group Co:, Ltd:, Guangzhou Guoxian Technology Co:, Ltd:, Hefei Visionox Technology Co:, Ltd:, Visionox Technology Co:, Ltd: Beijing Visionox Technology Co:, Ltd:, Yungu (Gu'an) Technology Co:, Ltd:, Bazhou Yungu Electronic Technology Co:, Ltd:, Suzhou Qingyue Optoelectronics Technology Co:, Ltd: and Jiangsu Huixian Display Technology Co:, Ltd: The main drafters of this document are: Dang Pengle, Zhao Ying, Li Junkai, Zhang Zhigang, Gao Xiaoyu, Tang Xin, Zhang Deqiang, Liu Yanling, Gao Yudi, Cheng Ji:IntroductionThe new display industry is a strategic, basic and leading industry for national economic and social development: Flexible display devices are new display The flexible display industry is one of the important development directions: Due to its bendability, lightness and thinness, its market share has been steadily increasing: The production, manufacturing, inspection and import and export trade needs of device products are to formulate a series of standards for flexible display devices: The Flexible Display Devices are proposed to be Partial composition: --- Part 1-1: Terms and text symbols: The purpose is to define the terms, definitions and text symbols preferred for flexible display devices: --- Part 1-2: General specification: The purpose is to specify the classification, technical requirements, inspection methods, inspection rules, and Marking, packaging, transportation and storage requirements: --- Part 2: Ratings and characteristics: The purpose is to specify the basic ratings and characteristics requirements of flexible display devices: --- Part 3-1: Detailed specification for side-bent flexible display modules: The purpose is to specify the terms and definitions of side-bent flexible display modules, Classification, technical requirements, inspection methods, inspection rules, as well as marking, packaging, transportation and storage requirements: --- Part 3-2: Detailed specification for external folding flexible display module: The purpose is to specify the terminology and Definition, classification, technical requirements, inspection methods, inspection rules, as well as marking, packaging, transportation and storage requirements: --- Part 3-3: Detailed specification for inner folding flexible display module: The purpose is to specify the terminology and Definition, classification, technical requirements, inspection methods, inspection rules, as well as marking, packaging, transportation and storage requirements: --- Part 3-4: Detailed specification for rolled flexible display module: The purpose is to specify the terms and definitions, technical Requirements, inspection methods, inspection rules, as well as marking, packaging, transportation and storage requirements: --- Part 4-1: Detailed specification for wearable flexible display modules: The purpose is to define the terminology and Definitions, requirements, inspection rules, inspection methods, and packaging, transportation and storage requirements: --- Part 5-1: Optical performance test method: The purpose is to specify the optical properties of flexible display devices under dark room and ambient light conditions: Standard test conditions and test methods for performance: --- Part 5-2: Test methods for optical performance of non-portable curved display devices: The purpose is to specify non-portable curved display devices Standard test conditions and test methods for optical properties under darkroom conditions: --- Part 5-3: Visual evaluation method: The purpose is to specify the overall framework and operating procedures for the visual evaluation of flexible display devices: --- Part 5-10: Stretchable optical performance test specification: The purpose is to specify the stretchable flexible display device under darkroom conditions: Standard test conditions and test methods for optical properties: --- Part 6-1: Mechanical stress test method: The purpose is to specify the mechanical stress test method for evaluating flexible display modules: --- Part 6-2: Environmental test methods: The purpose is to specify the performance of flexible display devices under specified conditions of use, storage and transportation: Test methods for environmental adaptability: --- Part 6-3: Mechanical test methods Impact and hardness test: The purpose is to specify the standard for the mechanical reliability of flexible display devices Test methods, especially for the mechanical reliability of flexible display devices subjected to external forces, impact and hardness: Flexible display devices Part 5-3: Visual evaluation method1 ScopeThis document specifies the overall framework and operating procedures for the visual evaluation of flexible display devices: This document applies to the visual evaluation methods of flexible display devices in the following states: ---Initial state and aging state under standard environmental conditions; ---State under mechanical or environmental stress conditions; --- State after mechanical durability test, state after environmental durability test, state after mechanical and environmental combined durability test: NOTE Visual assessment of mechanical or environmental stress is often difficult to perform and this method should be used if applicable: Visual evaluation is accomplished by comparison of the test sample with a limit sample or a set of graded samples: This document provides limit samples: The framework and procedures to be followed in the preparation of limit samples and a set of graded samples are described: It also specifies the visual evaluation methods for different types of defects of limit samples and grade samples:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: IEC 62715-1-1 Flexible display devices Part 1-1: Terms and text symbols (IEC 62715-1-1, Flexible display de- Note: GB/T 38001:11-2020 Flexible display devices Part 1-1: Terminology and text symbols (IEC 62715-1-1:2013, IDT) IEC 62715-6-1 Flexible display devices Part 6-1: Mechanical stress test method (IEC 62715-6-1, Flexible display Note: GB/T 38001:61-2019 Flexible display devices Part 6-1: Mechanical stress test method (IEC 62715-6-1:2014, IDT) IEC 62715-6-2 Flexible display devices Part 6-2: Environmental test methods (IEC 62715-6-2, Flexible display de- IEC 61747-30-1 Liquid crystal display devices Part 30-1: Measurement methods for liquid crystal display modules Transmission type (Liquid crystal display type) Note: GB/T 18910:61-2021 Liquid crystal display devices Part 6-1: Test methods for photoelectric parameters of liquid crystal display devices (IEC 61747-30-1: 2012, NEQ)3 Terms and definitionsFor the purposes of this document, the terms and definitions defined in IEC 62715-1-1 and the following apply: The URLs for terminology databases used for standardization maintained by ISO and IEC are as follows: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38001.53-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 38001.53-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38001.53-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38001.53-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
