GB/T 37726-2019 PDF EnglishUS$759.00 · In stock · Download in 9 seconds
GB/T 37726-2019: Information technology - Criteria for lean six sigma application in data center Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37726-2019: Information technology - Criteria for lean six sigma application in data center---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37726-2019Information technology - Criteria for lean six sigma application in data center ICS 35.080 L77 National Standards of People's Republic of China Information Technology Data Center Lean Six Sigma Application Evaluation criteria Informationtechnology-Criteriaforleansixsigmaapplicationin Datacenter Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued Content Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3.1 Terms and Definitions 1 3.2 Abbreviations 2 4 maturity model 2 4.1 Frame Figure 2 4.2 Evaluation Structure 3 4.3 Model Application 5 5 Evaluation dimension 6 5.1 Leadership 6 5.2 Strategy and Customer 7 5.3 Organizational advancement 7 5.4 Management Foundation 8 5.5 Improvement and Innovation 9 5.6 Talent Development 10 5.7 Implementation Results 11 6 maturity evaluation 12 6.1 Maturity rating level 12 6.2 dimension weight 14 6.3 Score calculation 14 Appendix A (Normative Appendix) Maturity Evaluation Rule 15 Appendix B (normative appendix) Evaluation dimension, evaluation elements, evaluation points and evaluation item weights 29 Reference 32 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard is under the jurisdiction of the National Information Technology Standardization Technical Committee (SAC/TC28). This standard was drafted. China Merchants Bank Co., Ltd., China Quality Association, China UnionPay Co., Ltd., Digital China (China) Co., Ltd., China Minsheng Banking Co., Ltd., China Construction Bank Corporation, Huawei Technologies Co., Ltd., China Electronic Technology Standardization Institute, Science Consulting (Shenzhen) Co., Ltd., Shanghai Hanwei Information Technology Co., Ltd., Guan Yizhongxiang (Beijing) Technology Co., Ltd. Company, Zhaowei Technology (Shenzhen) Co., Ltd. The main drafters of this standard. Gao Xulei, Jia Jungang, Lu Qing, Hao Jianming, Yu Xiaobin, Tang Kai, Zhang Guoyong, Yin Yong, Ma Pingqing, Zhang Kai, Lin Qing, Zou Fujun, Zeng Yi, Li Wencheng, Wang Wei, Dai Yue, Zhu Yarong, Fu Yi, Tang Shuzheng, Gu Qingfeng, Bi Yongjun, Ding Hui, Zhang Long, Wang Qi, Wu Lei, Qi Weining, Li Wei, Zhou Ping, Xu Yanbing, Wang Hedong, You Qinglin, Ding Junyong, Hong Jinhua, Duan Lisong, Sun Weiwei, Wang Zhipeng, Wu Maolin, Zhou Xiao, Wang Ruiqi, Liang Guiying, Chen Hongfeng, Wu Qun, Zuo Tianzu, Chen Jian, Zhu Zhizheng, Jiang Qingliang, Bai Jingjie, Tan Hongmei, Lei Minsheng, Zhou Changqing.introductionThe data center Lean Six Sigma application evaluation standard proposed in this standard can be used for comprehensive quantitative evaluation of data center Lean Six Sigma. Application maturity makes it easy for organizations to identify strengths and opportunities for improvement and innovation, and to continuously improve management and application of improvement and innovation. Level. This standard provides a framework model and self-evaluation standard for data center promotion Lean Six Sigma, and can also be used for data center to supplier. Lean Six Sigma application maturity evaluation, and third-party Lean Six Sigma application maturity evaluation, this standard is a universal evaluation standard Standard, applicable to data centers in various industries that implement Lean Six Sigma management. Information Technology Data Center Lean Six Sigma Application Evaluation criteria1 ScopeThis standard proposes a data center lean Six Sigma application model, evaluation criteria framework, and specifies data center lean Six Sigma applications. Maturity evaluation method. This standard applies to parties involved in Lean Six Sigma application evaluation. a) Data center construction, monitoring, measurement and evaluation of Lean Six Sigma applications; b) Service demand side evaluation of the data center Lean Six Sigma application; c) Measurement and evaluation of the maturity of the data center Lean Six Sigma application by third parties.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 19000-2016 Quality Management System Foundation and Terminology 3 Terms, definitions and abbreviations 3.1 Terms and definitions The following terms and definitions defined in GB/T 19000-2016 apply to this document. 3.1.1 Data center datacenter Computer station (computer room), computer room infrastructure, information system hardware (physical and virtual resources), information system software, information resources Organizations consisting of (data), personnel, and corresponding regulations. 3.1.2 Lean Six Sigma leansixsigma Through rigorous process and scientific methods, we will achieve breakthrough improvement and design innovation in organizational business processes, reduce variation and eliminate Waste, improve quality and efficiency, improve customer and stakeholder satisfaction, and facilitate a systematic and structured organization of strategic goals Business improvement and innovation models. 3.1.3 DMAIC Methodology DMAICmethodology One of Lean Six Sigma includes Define, Measure, Analyze, Improve, and Control (Control) Five-stage systematic, structured continuous improvement methodology. 3.1.4 Level level Classification or grading of products, processes or systems with the same functional use but different quality requirements. GB/T 37726-2019 Information technology - Criteria for lean six sigma application in data center ICS 35.080 L77 National Standards of People's Republic of China Information Technology Data Center Lean Six Sigma Application Evaluation criteria Informationtechnology-Criteriaforleansixsigmaapplicationin Datacenter Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued Content Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3.1 Terms and Definitions 1 3.2 Abbreviations 2 4 maturity model 2 4.1 Frame Figure 2 4.2 Evaluation Structure 3 4.3 Model Application 5 5 Evaluation dimension 6 5.1 Leadership 6 5.2 Strategy and Customer 7 5.3 Organizational advancement 7 5.4 Management Foundation 8 5.5 Improvement and Innovation 9 5.6 Talent Development 10 5.7 Implementation Results 11 6 maturity evaluation 12 6.1 Maturity rating level 12 6.2 dimension weight 14 6.3 Score calculation 14 Appendix A (Normative Appendix) Maturity Evaluation Rule 15 Appendix B (normative appendix) Evaluation dimension, evaluation elements, evaluation points and evaluation item weights 29 Reference 32ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard is under the jurisdiction of the National Information Technology Standardization Technical Committee (SAC/TC28). This standard was drafted. China Merchants Bank Co., Ltd., China Quality Association, China UnionPay Co., Ltd., Digital China (China) Co., Ltd., China Minsheng Banking Co., Ltd., China Construction Bank Corporation, Huawei Technologies Co., Ltd., China Electronic Technology Standardization Institute, Science Consulting (Shenzhen) Co., Ltd., Shanghai Hanwei Information Technology Co., Ltd., Guan Yizhongxiang (Beijing) Technology Co., Ltd. Company, Zhaowei Technology (Shenzhen) Co., Ltd. The main drafters of this standard. Gao Xulei, Jia Jungang, Lu Qing, Hao Jianming, Yu Xiaobin, Tang Kai, Zhang Guoyong, Yin Yong, Ma Pingqing, Zhang Kai, Lin Qing, Zou Fujun, Zeng Yi, Li Wencheng, Wang Wei, Dai Yue, Zhu Yarong, Fu Yi, Tang Shuzheng, Gu Qingfeng, Bi Yongjun, Ding Hui, Zhang Long, Wang Qi, Wu Lei, Qi Weining, Li Wei, Zhou Ping, Xu Yanbing, Wang Hedong, You Qinglin, Ding Junyong, Hong Jinhua, Duan Lisong, Sun Weiwei, Wang Zhipeng, Wu Maolin, Zhou Xiao, Wang Ruiqi, Liang Guiying, Chen Hongfeng, Wu Qun, Zuo Tianzu, Chen Jian, Zhu Zhizheng, Jiang Qingliang, Bai Jingjie, Tan Hongmei, Lei Minsheng, Zhou Changqing.introductionThe data center Lean Six Sigma application evaluation standard proposed in this standard can be used for comprehensive quantitative evaluation of data center Lean Six Sigma. Application maturity makes it easy for organizations to identify strengths and opportunities for improvement and innovation, and to continuously improve management and application of improvement and innovation. Level. This standard provides a framework model and self-evaluation standard for data center promotion Lean Six Sigma, and can also be used for data center to supplier. Lean Six Sigma application maturity evaluation, and third-party Lean Six Sigma application maturity evaluation, this standard is a universal evaluation standard Standard, applicable to data centers in various industries that implement Lean Six Sigma management. Information Technology Data Center Lean Six Sigma Application Evaluation criteria1 ScopeThis standard proposes a data center lean Six Sigma application model, evaluation criteria framework, and specifies data center lean Six Sigma applications. Maturity evaluation method. This standard applies to parties involved in Lean Six Sigma application evaluation. a) Data center construction, monitoring, measurement and evaluation of Lean Six Sigma applications; b) Service demand side evaluation of the data center Lean Six Sigma application; c) Measurement and evaluation of the maturity of the data center Lean Six Sigma application by third parties.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 19000-2016 Quality Management System Foundation and Terminology 3 Terms, definitions and abbreviations 3.1 Terms and definitions The following terms and definitions defined in GB/T 19000-2016 apply to this document. 3.1.1 Data center datacenter Computer station (computer room), computer room infrastructure, information system hardware (physical and virtual resources), information system software, information resources Organizations consisting of (data), personnel, and corresponding regulations. 3.1.2 Lean Six Sigma leansixsigma Through rigorous process and scientific methods, we will achieve breakthrough improvement and design innovation in organizational business processes, reduce variation and eliminate Waste, improve quality and efficiency, improve customer and stakeholder satisfaction, and facilitate a systematic and structured organization of strategic goals Business improvement and innovation models. 3.1.3 DMAIC Methodology DMAICmethodology One of Lean Six Sigma includes Define, Measure, Analyze, Improve, and Control (Control) Five-stage systematic, structured continuous improvement methodology. 3.1.4 Level level Classification or grading of products, processes or systems with the same functional use but different quality requirements. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37726-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37726-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37726-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37726-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37726-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37726-2019?A step-by-step guide to download PDF of GB/T 37726-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37726-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
