GB/T 37582-2019 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 37582-2019: Requirements for corrosion control engineering in the life cycle of marine engineering equipment Status: Valid
Basic dataStandard ID: GB/T 37582-2019 (GB/T37582-2019)Description (Translated English): Requirements for corrosion control engineering in the life cycle of marine engineering equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A01 Classification of International Standard: 03.100.99 Word Count Estimation: 14,118 Date of Issue: 2019-06-04 Date of Implementation: 2020-05-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 37582-2019: Requirements for corrosion control engineering in the life cycle of marine engineering equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Requirements for corrosion control engineering in the life cycle of marine engineering equipment ICS 03.100.99 A01 National Standards of People's Republic of China Marine engineering equipment corrosion control engineering Full life cycle requirements Published on.2019-06-04 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Petroleum and Chemical Industry Federation. This standard is under the jurisdiction of the National Anti-corrosion Standardization Technical Committee (SAC/TC381). This standard was drafted. Qingdao Haijian Group Co., Ltd., Zhejiang Xuanda Environmental Technology Co., Ltd., China Environmental Protection Corrosion Control Cheng Technology Research Institute (Beijing) Co., Ltd., Shenyang Zhongke Corrosion Control Engineering Technology Center, Shenyang Zhongke Corrosion Control Engineering Technology Co., Ltd. Division, Qingdao Dimar Marine Engineering Co., Ltd., China Industrial Anti-Corrosion Technology Association. The main drafters of this standard. Li Jianguo, Wang Xunlong, Wang Yan, Shi Qingtai, Yu Haicheng, Wang Guiming, Li Chuanzeng, Zhao Jian, Yu Yu, Zhang Dagang, Yu Qing. Marine engineering equipment corrosion control engineering Full life cycle requirements1 ScopeThis standard specifies the general principles, objectives, sources of corrosion, technology, design, materials and additions of the entire life cycle of marine engineering equipment corrosion control engineering. Work, construction and installation, commissioning and commissioning, inspection and acceptance, operation, supervision, maintenance and repair, replacement and life extension, scrap and after-the-fact green Requirements for color environmental management, document management and documentation, resources and assessment. This standard applies to the management of related activities in the whole life cycle of marine engineering equipment corrosion control engineering.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 33314-2016 Corrosion control engineering life cycle general requirements3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Marine engineering equipment corrosion control engineering life cycle corrosioncontrolengineeringinthelifecycleofmarine Engineeringequipment Marine engineering equipment is from the initial design based on materials and protective measures to the entire process of construction, inspection, evaluation, use, maintenance, and scrapping. 3.2 Corrosion source corrosionsource A general term for various factors that affect corrosion. 3.3 Corrosion control corrosioncontrol Artificially intervene in the corrosion system to mitigate corrosion damage.4 General4.1 Marine engineering equipment corrosion control engineering life cycle requirements should run through the entire life cycle of marine engineering equipment, for offshore engineering Condition conditions, materials, technology, development, design, manufacturing, construction and installation, testing, acceptance, operation, and corrosion control engineering of the corrosion control project during the service life cycle Evaluate, maintain, replace life extension, document management and records, resources and other elements to meet the principles of integrity, system, and optimization. Achieve safety, economy and long life cycle operations. 4.2 The implementation of the whole life cycle requirements of the marine engineering equipment corrosion control project shall be based on each element and shall be formulated or selected accordingly. Technical standards and specifications. 4.3 The corrosion control project within the whole life cycle of marine engineering equipment shall be directed to the planning, implementation, inspection, action, etc., and shall be followed. GB/T 33314-2016 4.3 requirements, establish a management system, and effectively implement and continuous improvement to achieve full life of marine engineering equipment ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37582-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37582-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 37582-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37582-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
