GB/T 35203-2017 English PDF

US$519.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35203-2017: Space product general test documentation
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35203-2017	519	Add to Cart	6 days	Space product general test documentation	Valid

Similar standards

GB/T 38905   GB/T 38239   GB/T 42853   GB/T 42032   

Basic data

Standard ID: GB/T 35203-2017 (GB/T35203-2017)
Description (Translated English): Space product general test documentation
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: V01
Classification of International Standard: 49.140
Word Count Estimation: 26,216
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Regulation (derived from): National Standard Announcement 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35203-2017: Space product general test documentation

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Space product general test documentation ICS 49.140 V01 National Standards of People's Republic of China Aerospace products, general test files (ISO 17566.2011, Spacesystems-Generaltestdocumentation, MOD) 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses redrafted Law Amendment uses ISO 17566.2011 "space system common test documents." This standard and ISO 17566.2011 compared to the existence of technical differences, the provisions of these differences have been passed in the outer margin of the page margin Set the vertical single (|) were marked in Appendix A is given a list of the corresponding technical differences and their causes. This standard also made the following editorial changes. --- Added information Appendix A, gives the standard and ISO 17566.2011 technical differences and their causes. This standard proposed by China Aerospace Science and Technology Corporation. This standard by the National Aerospace Technology and Standardization Technical Committee (SAC/TC425) centralized. This standard was drafted by China Aerospace Standardization Institute, Beijing Institute of Satellite Environmental Engineering. The main drafters of this standard. Huo Yuqian, Han Xiaojian, to the tree red, Lu Jing, Ren Wei.

Introduction

This standard provides the aerospace system, subsystems or stand-alone in a test, the minimum requirements for the preparation of test documents. To simplify and standardize the test The preparation of inspection documents, the standard gives the main content of the test documents and templates. This standard contains four types of test documents. ---Test program; --- Test program; --- Test procedures; ---experiment report. Although the above documents are independent in terms of their functions, their contents are cross-linked and can be appropriately merged according to the type and complexity of tests. For example, for medium-complex tests, the test program and test protocol can be combined into a single file; for a very simple test, Gang, test program and test procedures into a single document. Chapter 4 gives the merger of documents under different circumstances. Aerospace products, general test files

1 Scope

This standard specifies the basic requirements for the preparation of test documents in the aerospace products to carry out a specific test, including the test program, test side Case, test procedures and test reports and other four types of general documents. This standard applies to aerospace systems, subsystems and stand-alone test of a specific document preparation.

2 Terms and definitions

The following terms and definitions apply to this document. 2.1 Analysis Validation methods using well-established techniques for theoretical estimation. These techniques include mathematical, statistical, qualitative design analysis, modeling and computer simulation. 2.2 Characteristic Distinct features. 2.3 Objective evidence objectiveevidence Data that supports the existence or authenticity of things. 2.4 Procedure The path specified for carrying out an activity or process. 2.5 Process process A set of interrelated or interacting activities that translate input into output. 2.6 Requirement Necessary or desirable, usually implied or required. 2.7 Test test Follow the procedure to determine one or more characteristics. 2.8 Verification Confirmation that the requirement has been satisfied by providing objective evidence.

3 file description

3.1 Test Outline The test program is the required test document for specifying the test object. For details, please refer to Appendix B. The test program mainly includes ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35203-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35203-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35203-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35203-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.