Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 35160.2-2017 English PDF

Q: How long will the true-PDF of English version of GB/T 35160.2-2017 be delivered?

Upon your order, we will start to translate GB/T 35160.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 35160.2-2017_English with my colleagues?

Yes. The purchased PDF of GB/T 35160.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35160.2-2017: Test methods for agglomerated stone -- Part 2: Determination of flexural strength
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35160.2-2017	119	Add to Cart	3 days	Test methods for agglomerated stone -- Part 2: Determination of flexural strength	Valid

Similar standards

GB/T 36143 JC/T 908 JC/T 973 GB/T 35160.4 GB/T 35160.5 GB/T 35160.3

Basic data

Standard ID: GB/T 35160.2-2017 (GB/T35160.2-2017)
Description (Translated English): Test methods for agglomerated stone -- Part 2: Determination of flexural strength
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q21
Classification of International Standard: 91.100.15
Word Count Estimation: 6,668
Date of Issue: 2017-12-29
Date of Implementation: 2018-11-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35160.2-2017: Test methods for agglomerated stone -- Part 2: Determination of flexural strength

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for agglomerated stone--Part 2. Determination of flexural strength ICS 91.100.15 Q21 National Standards of People's Republic of China Synthetic stone test method Part 2. Determination of flexural strength Part 2.Determinationofflexuralstrength Released on.2017-12-29 2018-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued

Foreword

GB/T 35160 "Synthetic Stone Test Method" is divided into 6 parts. --- Part 1. Determination of density and water absorption; --- Part 2. Determination of flexural strength; --- Part 3. Determination of compressive strength; ---Part 4. Determination of wear resistance; ---Part 5. Determination of thermal shock performance; ---Part 6. Determination of impact resistance. This part is the second part of GB/T 35160. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part was proposed by the China Building Materials Federation. This part is under the jurisdiction of the National Stone Standardization Technical Committee (SAC/TC460). This section is responsible for drafting units. Sinoma Artificial Crystal Research Institute Co., Ltd. (National Stone Quality Supervision and Inspection Center), building materials industry Technical Supervision Research Center, Dongguan Global Classic New Materials Co., Ltd. The main drafters of this section. Zhou Junxing, Liu Wuqiang, Zhong Wenbo, Xu Zhongbao. Synthetic stone test method Part 2. Determination of flexural strength

1 Scope

This part of GB/T 35160 specifies the terms and definitions, principles, equipment, sample preparation, and test of the bending strength test of synthetic stone. Test procedures, test results and test reports. This section applies to the test to determine the bending strength of synthetic stone.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 35165 synthetic stone terminology and classification

3 Terms and definitions

The terms and definitions defined in GB/T 35165 apply to this document.

4 Principle

The dry sample is placed on two circular shafts and a load is applied to the middle of the sample to measure the load value at the time of the fracture of the sample, thereby calculating the bending. strength.

5 instruments

5.1 The balance with a measurement accuracy of not less than 0.01% of the sample quality. 5.2 A blast drying oven capable of maintaining temperatures between (40 ± 5) °C and (70 ± 5) °C. 5.3 Measurement tools with a measurement accuracy of not less than 0.1 mm. 5.4 Test machine. The relative error of the indication value does not exceed ±1%, and the load of the sample damage is within the range of 20%~90% of the indication value of the equipment. 5.5 Specimen loading device. consists of two support shafts and a load shaft that applies pressure at the center. The distance between the two support shafts should be The sample length can be adjusted, as shown in Figure 1. The diameter of the three shafts should be no more than 20mm and the length should be greater than the width of the specimen. 5.6 Dryer.

6 sample preparation

6.1 Sampling Six samples of the same requirements were prepared in the same batch of materials, and large and irregular products should be cut. Sample not There should be defects such as cracks, ribs and corners. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35160.2-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35160.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35160.2-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35160.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.