GB/T 35148-2017 English PDFUS$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35148-2017: Petroleum and natural gas industries -- Downhole equipment -- Completion accessories Status: Valid
Basic dataStandard ID: GB/T 35148-2017 (GB/T35148-2017)Description (Translated English): Petroleum and natural gas industries -- Downhole equipment -- Completion accessories Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E92 Classification of International Standard: 75.180.10 Word Count Estimation: 38,394 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 35148-2017: Petroleum and natural gas industries -- Downhole equipment -- Completion accessories---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Petroleum and natural gas industries - Downhole equipment - Completion accessories ICS 75.180.10 E92 National Standards of People's Republic of China Oil and gas industry Downhole Tools Completion Tools Accessories Petroleumand naturalgasindustries- (ISO 14998.2013, MOD) 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Abbreviations 6 5 Functional Specifications 7 5.1 General 7 5.2 Function Type 7 5.3 Well parameters 8 5.4 Job parameters 8 5.5 Environmental suitability 8 5.6 The applicability of underground equipment 9 5.7 Design Verification 9 5.8 Quality Control 9 6 Technical Specifications 9 6.1 General 9 6.2 Technical Features 9 6.3 Design Requirements 9 6.4 Design Verification 12 6.5 Design Verification 12 6.6 Design Changes 14 6.7 Design Confirmation Extension 14 7 Suppliers (Manufacturers) Requirements 14 7.1 General 14 7.2 File and Data Control 15 7.3 Product Identification 16 7.4 Quality Requirements 16 8 Maintenance and repair 21 Transport and Storage 21 Appendix A (Normative) Confirmation of test requirements 22 Appendix B (Normative) Disconnection or reconnect function confirmation test requirements 25 Appendix C (Normative) Tubing telescopic function of the confirmation test requirements 28 Appendix D (Normative) Confirmation Test Requirements for Open Channel Function 30 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses redrafted law revision using ISO 14998.2013 "oil and gas industry downhole tools completion tools annex." This standard and ISO 14998.2013 technical differences and the reasons are as follows. --- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows. ● Replacing ISO 6508-1 with International Standard GB/T 230.1 modified; ● Replacing ISO 6506-1 with International Standard GB/T 231.1 modified; ● Equivalent to the international standard GB/T 2828.1 instead of ISO 2859-1; ● GB/T 3452.1 modified to adopt international standards instead of ISO 3601-1; ● Equivalent to the international standard GB/T 3452.2 instead of ISO 3601-3; ● Replaced ISO 6507-1 with International Standard GB/T 4340.1 modified; ● Equivalent to the international standard GB/T 9445 instead of ISO 97125; ● Equivalent with the international standard GB/T 19830 instead of ISO 11960; ● Equivalent to the international standard GB/T 20970 instead of ISO 14130; ● Replace ISO 15156 (all parts) with GB/T 20972 (all parts) equivalent to international standards; ● Equivalent to the international standard GB/T 21410 instead of ISO 16070; ● Replaced ISO 10423 with revision GB/T 22513 of international standard; ● Equivalent to the international standard GB/T 27025 instead of ISO 17025; ● GB/T 29169 modified to adopt international standards instead of ISO 10407-2; ● Replaced ISO 17078-1 with SY/T 6915.1 modified to use international standards; ● Replace ISO 17824 with SY/T 6916 modified to use international standards. --- 6.3.3.2.1 added "5) impact energy", impact energy is also one of the important parameters of mechanical properties of materials. --- 6.3.3.3 adds "e) other physical properties", non-metallic materials in addition to the performance standards given there are other physical Can, such as anti-corrosion, high temperature and so on. --- Removed some terms and definitions. This standard compared with ISO 14998.2013, made the following editorial changes. --- Removed references. This standard by the National Petroleum Drilling Equipment and Tools Standardization Committee (SAC/TC96) and focal point. This standard was drafted unit. Underground oil industry tools Quality Supervision and Inspection Center, China Petroleum and Chemical Corporation Petrochemical Engineering Institute Dezhou Stone Oil Drilling Research Institute, Dannoy (Beijing) Petroleum Technology Service Co., Ltd., Sinopec Northwest Oilfield Branch Engineering and Technology Management Department, in National Petroleum Bohai Drilling Engineering Co., Ltd. Engineering Research Institute, Anton Oil Technology (Group) Co., Ltd., Shengli Oilfield Plateau Petroleum Equipment limited liability company. The main drafters of this standard. Wang Han Yang, Ming Xianggui, Tian Xiaoyan, Luo Tao, Li Liangliang, Qin Jinli, Zhang Hulin, Zou Shuqiang, Duan Hui bamboo, Ruanchen Liang, Zhu Xinzhong, Gou Xudong, Lv Lijuan.IntroductionThis standard is completed by the completion tool accessory users (buyers) and manufacturers (suppliers) jointly developed, widely used in the world's stone Oil and gas industry. This standard gives both parties the requirements and information on the selection, processing, testing and use of completion tools accessories. this In addition, this standard also gives the manufacturer (supplier) the minimum requirements, manufacturers (suppliers) should comply with this standard. This standard was developed in order to grade additional quality documents and design recognition, users (buyers) can choose according to these changes Choose the level of special needs. This standard allows the use of higher-level requirements for quality control and design validation, providing users (buyers) with a special application profile The level of pieces of demand. To meet the special needs of users (buyers) or application requirements, this standard provides three quality levels. Quality level Q3 is the standard The minimum quality grade provided, quality grade Q2 provides additional inspection and verification steps, the quality level Q1 is provided by this standard The highest level. Users (purchasers) with special requirements can specify additional quality requirements. To meet the specific needs of users (buyers) or application requirements, this standard provides seven standard design verification levels (V6 to V0). Design Confirmation Level V6 is the lowest level and equipment requirement identified by the manufacturer (supplier). Confirm the higher complexity and accuracy of the test, The smaller the rank number. Users of this standard should be aware that the above outline requirements may be required for individual purposes in this standard. The purpose of this standard is not limited to Instead, suppliers (suppliers), or restricted users (buyers) purchase, but in the tools and engineering solutions to provide choices. This situation Especially suitable for innovative or developing technology areas. In the case of other alternatives, the manufacturer (supplier) should confirm this standard All differences and provide detailed instructions. Oil and gas industry Downhole Tools Completion Tools Accessories1 ScopeThis standard specifies the oil and gas industry completion tools and accessories in the functional and technical requirements and guidelines, including.Design, Design Verification and Validation, Materials, Documents and Data Control, Maintenance, Repair, Transport, Storage. This standard specifies the completion tool attachment pressure, Axial load, disconnected or reconnected, tubing telescoping, channel opening function. This standard does not apply to GB/T 19830, GB/T 28259, GB/T 22513, GB/T 20970, GB/T 21410, GB/T 29169, SY/T 6915.1, SY/T 6916, ISO 28781 does not apply to the following products. Liner or tubing hanger, downhole test Tools, sand control screens, fluid control valves, ground control bushings and throttles, downhole lifting equipment, electrical controls, nor do they apply to these products Connect and install.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 230.1 Metallic materials Rockwell hardness test Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Ruler) (GB/T 230.1-2009, ISO 6508-1.2005, MOD) GB/T 231.1 Brinell hardness test of metallic materials Part 1. Test methods (GB/T 231.1-2009, ISO 6506-1. 2005, MOD) GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) (GB/T 2828.1-2012, ISO 2859-1.1999, IDT) GB/T 3452.1 Hydraulic Pneumatic Sealing Sealants Part 1. Dimensions and tolerances (GB/T 3452.1-2005, ISO 3601-1.2002, MOD) GB/T 3452.2 Pneumatic Sealing ring with aerosols - Part 2. Appearance quality inspection specification (GB/T 3452.2-2007, ISO 3601-3.2005, IDT) GB/T 4340.1 Vickers hardness test of metallic materials - Part 1. Test methods (GB/T 4340.1-2010, ISO 6507- 1.2005, MOD) GB/T 9445 non-destructive testing personnel qualification and certification (GB/T 9445-2008, ISO 9712.2005, IDT) Oil and gas well casing or tubing for oil and natural gas industries (GB/T 19830-2017, ISO 11960). 2014, IDT) Petroleum and natural gas industry downhole tool packer and bridge plug (GB/T 20970-2007, ISO 14310. 2001, IDT) GB/T 20972 (all parts) Materials for the hydrogen sulfide-containing environment in oil and gas exploration in the oil and gas industry [ISO 15156 Some part)] GB/T 21410 oil and gas industry downhole tool locking mandrel and positioning joints (GB/T 21410-2015, ISO 16070.2005, IDT) GB/T 22513 Oil and gas industry drilling and production equipment Wellhead and Christmas tree (GB/T 22513-2013, ISO 10423.2009, MOD) ...... |
