GB/T 35137-2025 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35137-2025: The high-frequency reciprocating rig for diesel fuel assessment of lubricity Status: Valid GB/T 35137: Historical versions
Basic dataStandard ID: GB/T 35137-2025 (GB/T35137-2025)Description (Translated English): The high-frequency reciprocating rig for diesel fuel assessment of lubricity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N75 Classification of International Standard: 17.040.30 Word Count Estimation: 14,170 Date of Issue: 2025-05-30 Date of Implementation: 2025-12-01 Older Standard (superseded by this standard): GB/T 35137-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 35137-2025: The high-frequency reciprocating rig for diesel fuel assessment of lubricity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 17.040.30 CCSN75 National Standard of the People's Republic of China Replaces GB/T 35137-2017 High frequency reciprocating test machine for diesel lubricity evaluation Released on 2025-05-30 2025-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 System composition and test principle 2 4.1 System Configuration 2 4.2 Test Principle 2 5 Technical Requirements 2 5.1 Appearance 2 5.2 Measuring Performance 2 5.3 Environmental adaptability 4 5.4 Safety performance 4 6 Test methods 4 6.1 Appearance 4 6.2 Measurement Performance 4 6.3 Environmental adaptability 5 6.4 Safety performance 5 7 Instrument Verification 5 7.1 Test ball 5 7.2 Test piece 5 7.3 Reference oil 5 7.4 General operating rules 6 8 Inspection Rules 6 8.1 Classification of inspections 6 8.2 Type inspection 6 8.3 Decision Rules 6 9 Packaging and accompanying documents, transportation and storage 6 9.1 Packaging and accompanying documents 6 9.2 Transportation 6 9.3 Storage 6 10 Installation conditions 6 References 7ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 35137-2017 "High Frequency Reciprocating Test Machine for Diesel Oil Lubricity Assessment" and is consistent with GB/T 35137-2017. In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The definition of "lubricity" in "Terms and Definitions" has been changed (see 3.1, 3.1 of the.2017 edition); b) The term “uncorrected average wear spot diameter” in “Terms and Definitions” was deleted (see 3.2 of the.2017 edition); c) Added the term "wear spot diameter" in "Terms and Definitions" (see 3.3); d) The term “corrected wear spot diameter” in “Terms and Definitions” was deleted (see 3.3 of the.2017 edition); e) Changed the definition of “verification” in “Terms and Definitions” (see 3.4, 3.4 of the.2017 edition); f) Changed the system structure and the schematic diagram of the main structure of the testing machine in "System Structure and Test Principle", and added the vibration shaft and stroke displacement Sensor, vibration isolation base, test ball fixture, friction measurement table and friction sensor (see 4.1, 4.1 of the.2017 edition); g) Added the provision of using average wear spot diameter in “System composition and test principle” (see 4.2, 4.2 of the.2017 edition); h) Changed the appearance requirements in the "Technical Requirements" (see 5.1, 5.1 of the.2017 edition); i) The permissible ranges of temperature and relative humidity in the test chamber in the “Technical Requirements” have been tightened (see 5.2.2.1, 5.2.2.1 of the.2017 edition); j) The adjustment methods and requirements for temperature and relative humidity in the test chamber in the "Technical Requirements" have been tightened (see 5.2.2.2,.2017 Edition). 5.2.2.2); k) Changed the requirements for data measurement systems in the “Technical Requirements” (see 5.2.3, 5.2.3 of the.2017 edition); l) Changed the repeatability requirements in the "Technical Requirements" (see 5.2.4, 5.2.4 of the.2017 edition); m) The load test method in "Test method" has been changed (see 6.2.1.2, 6.2.1.2 of the.2017 edition); n) The stroke test method in “Test method” has been changed (see 6.2.1.3, 6.2.1.3 of the.2017 edition); o) The test method for frequency in "Test method" has been changed (see 6.2.1.4, 6.2.1.4 of the.2017 edition); p) The test method for oil sample temperature in "Test method" has been changed (see 6.2.1.5, 6.2.1.5 of the.2017 edition); q) The test method for test time in "Test method" has been changed (see 6.2.1.6, 6.2.1.6 of the.2017 edition); r) Changed the location requirements for measuring temperature and relative humidity in the "Test Method" (see 6.2.2.1, 6.2.2.2, 6.2.2.1,.2017 edition) 6.2.2.2); s) Added the method for checking the pixels of digital microscope photos in the "Test Method" (see 6.2.3.2, 6.2.3 of the.2017 edition); t) The test method for repeatability in “Test method” was changed (see 6.2.4, 6.2.4 of the.2017 edition); u) The standard basis of the test materials in "Verification of the instrument" has been changed (see 7.1, 7.2, 7.1, 7.2 of the.2017 edition); v) Changed the provisions for reference oil in “Instrument Verification” (see 7.3, 7.3 of the.2017 edition); w) The provisions on the operating principles in “Verification of the instrument” have been modified (see 7.4, 7.4 of the.2017 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Industrial Process Measurement, Control and Automation Standardization Technical Committee (SAC/TC124). This document was drafted by. National Petroleum Product Quality Inspection and Testing Center (Shenyang), Beijing Chaoyang Hi-Tech Applied Technology Research Institute Co., Ltd. Company, Liaoning Product Quality Supervision and Inspection Institute, Guangdong Academy of Sciences Testing and Analysis Institute (China Guangzhou Analysis and Testing Center), Tianjin Product Quality Supervision and Inspection Technology Research Institute [Technology Innovation Center of the State Administration for Market Regulation (Petroleum and Petrochemical Product Quality and Safety)], China Aviation Fuel Limited Liability Company North China Company, Liaoning Sante Petrochemical Co., Ltd., Dalian North Analytical Instrument Co., Ltd., Runying Landi Metrology and Testing (Shanghai) Co., Ltd., North Huajin Chemical Industry Co., Ltd. The main drafters of this document are. Xue Lulin, Huang Botao, Bai Shuqi, Wen Huan, Tong Lili, Wen Xinjian, Liu Hui, Wang Lianzhu, Zhang Qiang, Cui Xiaoliang, Zhou Ti. The previous versions of this document and the documents it replaces are as follows. ---First published in.2017 as GB/T 35137-2017; ---This is the first revision. High frequency reciprocating test machine for diesel lubricity evaluation1 ScopeThis document specifies the system composition and test principle, technical requirements, instrument verification, inspection rules, packaging and accessories of the high-frequency reciprocating test machine. The machine documentation, transportation, storage and installation conditions describe the corresponding test methods. This document applies to high frequency reciprocating testing machines for diesel lubricity assessment.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 308.1-2013 Rolling bearing balls Part 1.Steel balls GB/T 6587 General specification for electronic measuring instruments GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 18254-2016 High carbon chromium bearing steel JB/T 11940 (all parts) Rules for the preparation of nameplates for petroleum product testing instruments Rig (HFRR) - Part 1.Test method (High frequency reciprocating test machine for diesel fuel - Evaluation of lubricity - Part 1.Test method)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Lubricity A property of a fluid that affects friction between surfaces under load and in relative motion with friction. Note. This testing machine uses the size of the wear spot on the test ball to evaluate the lubricity of the liquid. The size of the wear spot is expressed in microns. The test piece is completely immersed in the liquid to be tested and the friction between them is generated under strictly controlled test conditions. 3.2 Boundary lubrication The lubrication state between the friction surfaces is not completely dependent on the lubricant, but also contains a low shear strength compound film formed by other substances. 3.3 Wear spot diameter wearscardiameter; WSD After the test, the wear spots on the test ball are measured and the values in the X and Y directions are calculated again to obtain the average wear value. Spot diameter. 3.4 Check Two reference oils (high lubricity reference oil and low lubricity reference oil) with known values and expanded uncertainties were used as samples for evaluation. Determine and compare the evaluation results with the known values. Note. Reference oils are not certified reference materials because there is no calibration method that can calibrate them. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35137-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 35137-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35137-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35137-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 35137-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 35137-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
