GB/T 35100-2018 English PDFUS$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35100-2018: Fiber metal laminates -- Determination of interlaminar shear strength by short-beam method Status: Valid
Basic dataStandard ID: GB/T 35100-2018 (GB/T35100-2018)Description (Translated English): Fiber metal laminates -- Determination of interlaminar shear strength by short-beam method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H22 Classification of International Standard: 77.040.10 Word Count Estimation: 11,173 Date of Issue: 2018-05-14 Date of Implementation: 2019-04-01 Regulation (derived from): National Standards Announcement No. 6 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 35100-2018: Fiber metal laminates -- Determination of interlaminar shear strength by short-beam method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Fibre Metal Laminate Short Beam Method for Determination of Interlaminar Shear Strength) ICS 77.040.10 H22 National Standards of People's Republic of China Determination of interlaminar shear strength by fiber-reinforced metal sheet short beam method Published on.2018-05-14 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Engineering Materials Standardization Working Group (SAC/SWG3). This standard was drafted. Nanjing University of Aeronautics and Astronautics, Jiangsu Institute of Product Quality Supervision and Inspection, Nanjing Institute of Engineering, Nanjing Glass Fiber Wei Research and Design Institute Co., Ltd. The main drafters of this standard. Tao Jie, Li Huaguan, Zhu Yuhong, Wang Yan, Liu Cheng, Lu Tong, Yan Kai, Wang Qiong, Guo Xunzhong, Xu Weiwei, Pan Lei, Wang Zhangzhong, Zhao Qian, Yan Ning. Determination of interlaminar shear strength by fiber-reinforced metal sheet short beam method1 ScopeThis standard specifies the terms and definitions, test principles, test equipment, and tests for determining the interlaminar shear strength of fiber metal laminates using the short beam method. Sample, state adjustment, test procedure, calculation and results representation, test report. The double beam method is given in Appendix A for reference. This standard applies to thermoset or thermoplastic continuous fiber reinforced metal laminates that can undergo interlayer shear failure. This standard does not apply to the determination of design parameters, but can be used to screen materials or as a quality control test.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1446 fiber reinforced plastics performance test methods Standard environment for GB/T 2918 plastic sample conditioning and testing GB/T 17200 Rubber Plastic Tension, Pressure and Bending Tester (Constant Speed Drive) Technical Specifications Statistical processing of ISO 2602 data and estimation of the mean and confidence interval (Statisticalinterpretationoftestre- sults-Estimationofthemean-Confidenceinterval)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Short beam method short-beamsheartestmethod; SBS A rod with a rectangular cross section is used as a simply supported beam, and the rod is placed on two supports, and a bending load is applied at the center of the sample to cause interlaminar shearing. Cut and destroy. 3.2 Double beam method doubleshort-beamsheartestmethod; DBS A rod with a rectangular cross section is used as a simply supported beam, and the rod is placed on three supports, and loads are applied to the centers of the two sets of supports respectively to cause a layer to occur. Inter-cutting damage. 3.3 Fiber metal laminate fibermetallaminates; FMLs It is alternately laid from metal sheets (aluminum alloy, titanium alloy, etc.) and fibers (continuous fibers such as glass fiber, carbon fiber, and aramid fiber). After setting, it is a kind of interlayer hybrid composite which is solidified under a certain temperature and pressure. 3.4 Interlaminar shear stress interlaminarshearstress Shear stress acting between the sample layers. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35100-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 35100-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35100-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35100-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
