GB/T 34624-2017 English PDF

US$378.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34624-2017: Springs installed in hermetic motor-compressor -- Technical specifications
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34624-2017	378	Add to Cart	2 days	Springs installed in hermetic motor-compressor -- Technical specifications	Valid

Similar standards

GB/T 34667   GB/T 34668   GB/T 1239.2   GB/T 43074   GB/T 31214.2   

Basic data

Standard ID: GB/T 34624-2017 (GB/T34624-2017)
Description (Translated English): Springs installed in hermetic motor-compressor -- Technical specifications
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J26
Classification of International Standard: 21.160
Word Count Estimation: 26,285
Date of Issue: 2017-10-14
Date of Implementation: 2018-05-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34624-2017: Springs installed in hermetic motor-compressor -- Technical specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Springs installed in hermetic motor-compressor - Technical specifications ICS 21.160 J26 National Standards of People's Republic of China Fully enclosed motor - compressor With spring technical conditions 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard by the National Standardization Technical Committee spring (SAC/TC235) and focal point. This standard is drafted by Zhangjiagang Deer Spring Manufacturing Co., Ltd., Hangzhou Qianjiang Spring Co., Ltd. Guangzhou Spring Spring Limited company, machine productivity promotion center. Participated in the drafting of this standard. Tianjin 赛 Fu Electronic Materials Factory, Gasbera Compressor Co., Ltd., Xi'an Qingan refrigeration equipment shares Co., Ltd., Yangzhou Zhaohong Spring Co., Ltd., Yangzhou Ming Feng Spring Co., Ltd., Hubei Xin Bao Ma Spring Co., Ltd. The main drafters of this standard.Xu Huilong, Zhang Yongsen, Chen Guixiang, Yu Fang, Gao Hongfu, Gong Qinghua, Fan Zengzeng, Si Zhao Nian, Gu Yunfeng, Ma Po Lu, Xu Guofang, Cheng Peng, Jiang Ying, Lu Bacon, Shu Rongfu. Fully enclosed motor - compressor With spring technical conditions

1 Scope

This standard specifies the fully enclosed motor - compressor with a cross-sectional material cold coil coil spring structure, technical requirements, test side Law, inspection rules, marking, packaging, transportation and storage. This standard applies to fully enclosed motor - compressor with support springs, including. Equal pitch cylindrical helical compression spring, such as pitch cone cut screw Helical springs and equal pitch concave helical springs (hereinafter referred to as springs). Fully enclosed motor - compressor with other types of springs can refer to the use of this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1805 spring terminology GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 4357 cold drawn carbon steel spring wire GB/T 9098 refrigerator with a fully enclosed motor - compressor GB/T 10610 Geometrical product specifications (GPS) Surface texture profile method for the determination of surface texture rules and methods GB/T 18983 oil quenching - tempering spring steel wire JB/T 10802 spring shot peening technical specifications YB/T 5311 important use carbon spring steel wire

3 Terms and definitions

GB/T 1805 defined terms and definitions apply to this document.

4 structure type

Spring type, code, schematic and end structure type shown in Table 1. Spring support ring should be ≥ 4 laps, each side should be less than 2 laps. Table 1 Type Code Schematic End Structure Type Such as pitch Cylindrical screw Rotary compression spring BYⅠ both ends of the ring and tight grinding flat ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34624-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34624-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34624-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34624-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.