GB/T 34272-2017 English PDFUS$1199.00 ยท In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 34272-2017: Safety requirements of small amusement device Status: Valid
Basic dataStandard ID: GB/T 34272-2017 (GB/T34272-2017)Description (Translated English): Safety requirements of small amusement device Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y57 Word Count Estimation: 60,699 Date of Issue: 2017-09-29 Date of Implementation: 2018-04-01 Regulation (derived from): National Standard Announcement 2017 No. 23 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 34272-2017: Safety requirements of small amusement device---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Small rides safety regulations) ICS 97.200.40 Y57 National Standards of People's Republic of China Small amusement facilities safety specification Published on.2017-09-29 Implementation of.2018-04-01 General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Material 2 4.1 General 2 4.2 Flammability 2 4.3 Limits of harmful substances 3 5 Safety Requirements 3 5.1 General 3 5.2 Structural Integrity 4 5.3 Adult Accessibility 4 5.4 Fall Protection 4 5.5 Holding and Holding 6 5.6 Facility Surfaces and Overhangs 6 5.7 Squeezing Danger 7 5.8 Winding danger 9 5.9 Suspension Components 10 5.10 Fall Protection 11 5.11 Channel 16 5.12 Rope 17 5.13 Electrical 17 5.14 Welding 18 5.15 Appearance and Coating 18 5.16 Site Requirements 18 5.17 Installation 18 5.18 Sound Requirements 19 6 Test methods 19 6.1 General requirements 19 6.2 Basic parameters, important linear and angular dimension checks 19 6.3 Inspection of flammability properties 19 6.4 Inspection of Limits of Hazardous Substances 19 6.5 Aging resistance 19 6.6 Structural Integrity Test 19 6.7 Fatigue Performance Inspection 19 6.8 Surface Fillet Inspection 20 6.9 Prominence Inspection 20 6.10 Winding inspection 22 6.11 Appearance, Painting and Marking Inspection 31 6.12 Inspection of Plating Parts 31 6.13 Inspection of corrosion resistance of plated parts 31 6.14 Plating Bond Strength Test 31 6.15 coating impact strength test 31 6.16 Coating Adhesion Test 32 6.17 Electrical Safety Inspection 32 6.18 Noise Inspection 32 7 Signs and Maintenance Instructions 32 7.1 Product Logo 32 7.2 Maintenance Instructions 32 8 Use Management 33 8.1 General 33 8.2 Emergency Management and Rescue 33 Appendix A (Informative) Load 34 Appendix B (Informative) Structural Load Calculation Method 39 Appendix C (Normative) Physical Testing of Structural Integrity 45 Appendix D (informative) Possible pinching and winding scenarios 47 Appendix E (Normative Appendix) Test Method for Extrusion Protection 50 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Standardization Technical Committee for Ropeway and Amusement Facilities (SAC/TC250). This standard was drafted by. China Special Equipment Inspection and Research Institute, Nanjing Wande Amusement Equipment Co., Ltd., and Yongjia County Product Quality Supervision and Inspection Offices, Qiye Amusement Equipment (Nanjing) Co., Ltd., Qiaoqiao Industrial Co., Ltd., Yucai Holding Group Co., Ltd., and Qitele Group Co., Ltd. the company. The main drafters of this standard. Zhang Yong, Shen Gongtian, Hu Shihui, Chen Sujuan, Chen Guodong, Chen Dexu, Tan Yunfeng, Xing Youxin, Zhang Jinfei, Su Shangzhou, Wu Wanpeng, Liu Ran, and Pan Liqiao. Small amusement facilities safety specification1 ScopeThis standard specifies the materials, safety requirements, test methods, signs, and maintenance instructions and use management of small amusement facilities. This standard is applicable to small amusement facilities for children aged 3 to 14 years old playing in public places.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 1804-2000 Tolerances for tolerances of linear and angular dimensions for general tolerances GB/T 2408-2008 Determination of burning properties of plastics - Horizontal and vertical methods GB 5226.1 Mechanical electrical safety machinery electrical equipment Part 1. General technical conditions GB 6675.3 Toy Safety Part 3. Flammability GB 6675.4 Toy Safety Part 4. Migration of Specific Elements GB 8408 amusement facility safety specification Cross-cut test of GB/T 9286 paint and varnish paint film GB/T 16422.2 Plastics laboratory light source exposure test method Part 2. Xenon arc lamp GB/T 20118 General purpose wire rope GB/T 20306 Terms of amusement facilities GB/T 20946 General rules for acceptance of short-chain chains General requirements for GB/T 21328 fibre ropes Determination of specific phthalate plasticizers in GB/T 22048 toys and children's articles GB 24613-2009 Limits of harmful substances in paints for toys GB/T 28622-2012 Terms of Non-powered Amusement Facilities Safety performance requirements and test methods for GB/T 30228 ground impact attenuation in sports grounds GB 50009 Building Structure Load Specification GB 50017 Steel Design Specification QB/T 2569.1-2002 Steel boring tools QB/T 3814-1999 Test method for appearance quality of metal plating and chemical treatment layers of light industrial products QB/T 3821-1999 Test Method for Bonding Strength of Metal Coatings of Light Industrial Products QB/T 3826-1999 Corrosion resistance test method of metal plating and chemical treatment layer for light industrial products Neutral salt spray test (NSS) QB/T 3832-1999 Evaluation of Metal Coating Corrosion Test Results for Light Industry Products SN/T 1877.2 Determination of Polycyclic Aromatic Hydrocarbons in Plastic Raw Materials and Products SN/T 1877.4 Determination of Polycyclic Aromatic Hydrocarbons in Rubber and Articles Thereof3 Terms and DefinitionsThe terms and definitions defined in GB/T 20306 and GB/T 28622-2012 apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34272-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34272-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 34272-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34272-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
