GB/T 34099-2017 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 34099-2017: Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil -- Inductively coupled plasma emission spectrometry method Status: Valid
Basic dataStandard ID: GB/T 34099-2017 (GB/T34099-2017)Description (Translated English): Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil -- Inductively coupled plasma emission spectrometry method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E31 Classification of International Standard: 75.160.20 Word Count Estimation: 14,179 Date of Issue: 2017-07-31 Date of Implementation: 2018-02-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 34099-2017: Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil -- Inductively coupled plasma emission spectrometry method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil - Inductively coupled plasma emission spectrometry method ICS 75.160.20 E31 National Standards of People's Republic of China Residual fuel oil in the aluminum, silicon, vanadium, nickel, iron, sodium, Determination of calcium, zinc and phosphorus content Inductively coupled plasma atomic emission spectrometry Determinationofaluminium, silicon, vanadium, nickel, iron, sodium, calcium, zincandphosphorusinresidualfueloil- 2017-07-31 Posted 2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard by the National Petroleum Products and Lubricants Standardization Technical Committee (SAC/TC280) and focal point. This standard drafting unit. China Petroleum and Chemical Corporation Petrochemical Research Institute. The main drafters of this standard. Yan Jingjie, Xue Yan. Residual fuel oil in the aluminum, silicon, vanadium, nickel, iron, sodium, Determination of calcium, zinc and phosphorus content Inductively coupled plasma atomic emission spectrometry Warning --- personnel using this standard should have formal laboratory work experience. The use of this standard may involve some danger Materials, equipment and operations, this standard does not indicate all possible safety issues. It is the user's responsibility to take appropriate safety and health measures Shi, and ensure compliance with the conditions of the relevant state laws and regulations.1 ScopeThis standard specifies the determination of aluminum, silicon, vanadium, iron, nickel, sodium, calcium, zinc and phosphorus in the residual fuel oil by inductively coupled plasma atomic emission spectrometry Content analysis method. This standard applies to residual fuel oil, the determination of various elements in Table 1. Table 1 measurement range Elemental mass fraction range/(mg/kg) Al 5 ~ 150 Si 10 ~ 250 V 1 ~ 400 Ni 1 ~ 100 Fe 2 ~ 60 Na 1 ~ 100 Ca 3 ~ 100 Zn 1 to 70 P 1 ~ 60 If the sulfur content of the residual fuel oil is greater than 0.3%, sulfur is not required as an ashing aid in sample preparation. Chapter 10 In the precision data is derived from the fuel oil sulfur content greater than 0.3%. There is a certain correlation between the aluminum content and the silicon content in the residual fuel oil, depending on the content of aluminum or silicon or the content of both elements The content of the catalyst powder in the residual fuel oil can be estimated.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4756 Petroleum liquids - Manual sampling method Laboratory use specifications and test methods for analysis GB/T 6682-2008 Laboratory glassware measuring cylinder ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34099-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34099-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 34099-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34099-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
