GB/T 34074-2017 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34074-2017: Digital still cameras -- Noise measurements
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34074-2017	599	Add to Cart	5 days	Digital still cameras -- Noise measurements	Valid

Similar standards

DY/T 8   GB/T 19894   GB/T 44597   

Basic data

Standard ID: GB/T 34074-2017 (GB/T34074-2017)
Description (Translated English): Digital still cameras -- Noise measurements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N46
Classification of International Standard: 37.040.10
Word Count Estimation: 30,397
Date of Issue: 2017-07-31
Date of Implementation: 2018-02-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34074-2017: Digital still cameras -- Noise measurements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Digital still cameras - Noise measurements ICS 37.040.10 N46 National Standards of People's Republic of China Digital camera noise measurement (ISO 15739.2013, Photography- Electronicstil-pictureimaging-Noisemeasurements, IDT) 2017-07-31 Posted 2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 test conditions 3 4.1 General 3 4.2 light source 3 4.3 Temperature and relative humidity 4 4.4 white balance 4 4.5 Infrared (IR) cut-off filter 4 4.6 like the integral time 4 4.7 color noise weighted 4 4.8 compression 4 5 noise measurement procedures 4 5.1 General 4 5.2 interchangeable lens digital camera measurement 5 5.3 Digital Camera with Manual Exposure Control 6 5.4 Using the Test Card to Measure the Digital Camera 7 6 Calculation and result recording 8 6.1 General 8 Signal to Noise Ratio - Large Area 8 6.3 Digital Camera Dynamic Range 10 Appendix A (normative) noise component analysis 12 Appendix B (Normative) Visual noise measurement method Appendix C (Informative) Remove Low Frequency Variables from Image Data23 Appendix D (informative) Recommended procedures for determining signal to noise ratio Appendix E (Informative) Recommended Practices for Different Output Media 26 References 27

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method identical with ISO 15739.2013 "Photographic electronic imaging noise measurement method." This standard made the following editorial changes. --- In line with the existing standard series, the standard name was changed to "digital camera noise measurement." Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard is proposed by the China Machinery Industry Federation. This standard by the National Standardization Technical Committee camera (SAC/TC107) centralized. This standard was drafted. Hangzhou Camera Institute of Machinery, Zhejiang University. The main drafters of this standard. Wang Lin, Ge Shiqing, Yang Chunjun, Feng Huajun.

Introduction

Noise is a very important feature of electronic photography systems. This standard specifies the camera noise measurement methods, through digital analysis Technology, in the digital realm. Under different exposure time and operating temperature conditions, the noise performance of the image sensor can be very different, so the test conditions must Is specific. The visibility of the noise to the observer depends on the severity of the noise. The external tone of the image area contains the spatial frequency of noise and noise rate. The performance of noise in the output depends on the performance of the noise in the stored image data and on the contrast amplification or increase applied to the output data processing beneficial. The visibility of noise is different in different luminance (or monochrome) channels and color (or color difference) channels. Therefore, this standard is measuring The above factors are taken into account in recording camera noise. Appendix A describes the method of determining the digital camera noise composition by a number of samples. The perception of noise in an image may vary, depending on the distance observed, the spatial frequency, the density, the color, and the viewing bar Pieces. Appendix B illustrates a procedure for testing visual noise levels using the human visual model to weight the spectral components of noise method. Appendix C gives a method for removing low-frequency variables in the data result of a tile, for example, the brightness shade. Appendix D provides a recommended method for step-by-step determination of signal to noise ratio and incremental gain. In Appendix E, recommendations are made for the effective observation of various output media. Digital camera noise measurement

1 Scope

This standard specifies the digital camera noise and the corresponding signal level and dynamic range of measurement and recording methods. This standard applies to black and white and color electronic digital camera.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 7589-2002 photographic photographic detection of light source daylight, incandescent tungsten lamp and printer light source specifications (Photogra- phy-Iluminants forsensitometry-Specificationsfordaylight, incandescenttungstenandprinter) ISO 12232-2006 Photography Digital camera exposure index, ISO sensitivity, standard output sensitivity and recommended exposure index (Photography-Digitalstilcameras-Determinationofexposureindex, ISO speedratings, standardoutputsensitivity, andrecommendexdexposureindex) ISO 14524.2009 Photography Electrophotographic photometric conversion functions (OECFs) measurement method [Photography-Elec- tronicstil-picturecameras-Methodsformethuringopto-electronicconversionfunctions (OECFs)] ITU-RBT.709-5 HDTV standard for high-definition television standards and international program communication Parameter (Parameter valuesfortheHDTVStandardsforproductionandInternationalprogrammeexchange) CIE 15.2004 Colorimetry, 3rd edition (Colorimetry, 3rdedition)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Camera photoelectric conversion function cameraopto-electronicconversionfunction Camera OECFcameraOECF Enter the relationship between the logarithm of the brightness of the scene and the pixel value of the photo-electricity digital photography system. Note. The unit of measure for this function is log10cd/m2. 3.2 Cutoff value clippingvalue Further increase the exposure while keeping the value of a constant pixel output (highlight cutoff), or further reduce the exposure to the number of Constant pixel output value (dark cutoff). 3.3 Digital camera digitalstilcamera; DSC Digital still images are generated by the digital output of the solid-state image sensor and can use digital media (such as a removable memory card) Camera for storing digital still images. 3.4 Image sensor imagesensor Electronic equipment that converts incident electromagnetic radiation into electrical signals. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34074-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34074-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34074-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34074-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.