GB/T 33840-2025 English PDFUS$539.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33840-2025: General technical requirements for water jacket furnaces Status: Valid GB/T 33840: Historical versions
Basic dataStandard ID: GB/T 33840-2025 (GB/T33840-2025)Description (Translated English): General technical requirements for water jacket furnaces Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q99 Classification of International Standard: 27.060.30 Word Count Estimation: 26,278 Date of Issue: 2025-04-25 Date of Implementation: 2025-11-01 Older Standard (superseded by this standard): GB/T 33840-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33840-2025: General technical requirements for water jacket furnaces---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 27.060.30 CCSQ99 National Standard of the People's Republic of China Replace GB/T 33840-2017 General technical requirements for water jacket heating furnaces Released on 2025-04-25 2025-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 33840-2017 "General Technical Specifications for Water Jacket Heating Furnaces". Compared with GB/T 33840-2017, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows. a) Added the term and definition of “rated working pressure” (see 3.9); b) The term and definition of "exhaust temperature" have been deleted (see 3.11 of the.2017 edition); c) The provisions for selecting the nominal diameter of the water jacket heating furnace have been deleted (see 4.2.3 of the.2017 edition); d) Added the model examples of water jacket heating furnaces (see 5.1); e) The fuel type code has been modified (see 5.4, Table 3 of the.2017 edition); f) Added the requirements for heat exchange tube materials when the heated medium is an acidic medium (see 6.1.5); g) Added requirements for water quality and water treatment equipment for water jacket heating furnaces (see 7.1.3); h) Added the initial emission concentration requirements for water jacket heating furnaces (see 7.1.4); i) Added the requirement that the design unit of the water jacket heating furnace should clearly specify the model or main technical parameters of the burner (see 7.1.5); j) Modified the furnace insulation requirements (see 7.1.6, 4.2.6 of the.2017 edition); k) Added the typical structure diagram of water jacket heating furnace (see 7.2.1); l) Added the installation requirements for atmospheric connecting pipes for normal pressure water jacket heating furnaces and vacuum pressure control devices for negative pressure water jacket heating furnaces (see 7.2.9); m) Added the typical structural diagram of heat exchange tubes (see 7.2.16); n) The calculation formula for the bend (or elbow) of the heat exchange tube has been modified (see 7.3.8, 7.3.9 of the.2017 edition); o) Added the provisions for selecting the additional thickness of heat exchange tubes (see 7.3.9); p) Modified the material substitution approval process (see 8.1.4, 8.1.5 of the.2017 edition); q) The requirements for mechanical properties test of water jacket heating furnaces have been deleted (see 10.3 of the.2017 edition); r) The requirements for the qualification of the water jacket heating furnace installation unit and the notification before installation (see 9.1 of the.2017 edition) have been deleted. 9.1 and 9.2 are merged into 10.1 (see 10.1, 9.1 and 9.2 of the.2017 edition); s) Added requirements for antifreeze and rain and snow protection measures for water jacket heating furnaces installed outdoors (see 10.1.3); t) Added the requirement for users to regularly monitor the quality of boiler water and feed water (see 10.3.6); u) Added requirements for air pollutant emissions from water jacket heating furnaces (see 10.3.7); v) Added the requirements for selecting the flow channel diameter of the safety valve when the water temperature is not less than 100°C (see 11.2.3); w) Modified the selection requirements for pressure gauge accuracy grade (see 11.3.2, 11.3.2 of the.2017 edition); x) Added the requirements for the minimum number and type of water level gauges installed (see 11.4.1); y) Added the selection requirements for anti-frost level gauges when used outdoors in cold regions (see 11.4.2); z) The provision that the water level gauge should be stopped and replaced when it exceeds the maintenance period has been deleted (see 11.4.4 of the.2017 edition); aa) Added the requirement that the burner manufacturer (or distributor) should provide a type test certificate (see 12.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Combustion Energy Saving and Purification Standardization (SAC/TC441). This document was drafted by. Anhui Special Equipment Testing Institute, University of Science and Technology of China, Borite Thermal Equipment Co., Ltd., Bengbu Tianyi Boiler Manufacturing Co., Ltd., Yingkou Boiler Pressure Vessel Inspection and Research Co., Ltd., Chongqing Huachuan Oil Construction Equipment Manufacturing (Group) Co., Ltd. Co., Ltd., Panjin Chentong Boiler Manufacturing Co., Ltd., PetroChina Liaohe Engineering Co., Ltd., Anhui Quality and Standardization Research Institute, Shandong Wanbang Stone Oil Technology Co., Ltd., Shandong Luneng Special Equipment Inspection and Testing Co., Ltd., Shandong Xilong Petroleum Equipment Co., Ltd., China Petroleum Tian Daqing Special Equipment Inspection Center of Natural Gas Co., Ltd., Daqing Special Equipment Inspection Institute, Dongying Chenggong Petroleum Technology Co., Ltd. Company, Jiangsu Kesheng Intelligent Equipment Co., Ltd., Anhui Product Quality Supervision and Inspection Institute, and Wuhu Special Equipment Inspection Institute. The main drafters of this document are. Xia Hongwei, Yang Bingying, He Liqun, Zhang Fengan, Xu Li, Zhang Wenqiu, Han Peng, Yang Jie, Zhang Haitao, Meng Fanling, Pei Zhaohua, Dong Kai, Wang Shaoyou, Wang Weiguo, Cui Xiaodong, Wan Jun, Cheng Zhiqiang, Lin Heyong, Tang Haibo, Cao Shixing, Tang Yuming, Liu Cunxin, Wang Zailiang, Zhang Quankui, Cheng Wenqiang, Ge Dazhong, and Wu Shaojun. This document was first published as GB/T 33840-2017 in.2017 and this is the first revision. General technical requirements for water jacket heating furnaces1 ScopeThis document defines the terms and definitions of water jacket heating furnaces, describes the basic parameters, model compilation method, and specifies materials, design, manufacturing, General technical requirements for inspection and testing, installation, commissioning and use, safety accessories and instruments, and combustion equipment and systems. This document is applicable to the use of solid, liquid or gas as fuel, the rated working pressure of the water jacket is less than 0.1MPa and the maximum working temperature The temperature is less than 120℃, the crude oil or its mixture is heated by the water in the water jacket, and the maximum working temperature of the heated medium in the heat exchange tube is lower than the standard boiling point Water jacket heating furnace. This is used as a reference when other media are inside the heat exchange tubes of the water jacket heating furnace.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 151 Heat Exchanger GB/T 699 High-quality carbon structural steel GB/T 713.1 Steel plates and strips for pressure equipment Part 1.General requirements GB/T 713.2 Steel plates and strips for pressure equipment Part 2.Non-alloy steels and alloy steels with specified temperature properties GB/T 3087 Seamless steel tubes for low and medium pressure boilers GB/T 3274 Hot-rolled carbon structural steel and low-alloy structural steel plates and strips GB 4053.3 Safety requirements for fixed steel ladders and platforms Part 3.Industrial guardrails and steel platforms GB/T 5310 Seamless steel tubes for high pressure boilers GB/T 6479 Seamless steel pipe for high pressure fertilizer GB/T 9948 Seamless steel pipe for petroleum cracking GB/T 12459 Types and parameters of steel butt-welding pipe fittings GB 13271 Boiler Air Pollutant Emission Standard GB/T 13401 Technical specification for steel butt-welding pipe fittings GB/T 16507.4-2022 Water-tube boilers Part 4.Strength calculation of pressure components GB/T 16507.5-2022 Water tube boilers Part 5.Manufacturing GB/T 16508.2-2022 Shell boilers Part 2.Materials GB/T 16508.3-2022 Shell boilers Part 3.Design and strength calculation GB/T 16508.4-2022 Shell boilers Part 4.Manufacturing, inspection and acceptance GB/T 16508.5-2022 Shell boilers Part 5.Safety accessories and instruments GB/T 16508.6-2022 Shell boilers Part 6.Combustion system GB 24848-2010 Energy efficiency limits and energy efficiency grades for heating furnaces used in the petroleum industry GB/T 37650 Terms and definitions of combustion methods GB 50242 Code for acceptance of construction quality of building water supply, drainage and heating projects HG/T 20592 Steel Pipe Flange (PN Series) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33840-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 33840-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33840-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33840-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 33840-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33840-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
