GB/T 33632-2025 English PDFUS$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33632-2025: General installation requirements for aero-derivative gas turbines assembly Status: Valid GB/T 33632: Historical versions
Basic dataStandard ID: GB/T 33632-2025 (GB/T33632-2025)Description (Translated English): General installation requirements for aero-derivative gas turbines assembly Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K56 Classification of International Standard: 27.040 Word Count Estimation: 14,146 Date of Issue: 2025-06-30 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB/T 33632-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33632-2025: General installation requirements for aero-derivative gas turbines assembly---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33632-2025ICS 27.040 CCSK56 National Standard of the People's Republic of China Replaces GB/T 33632-2017 Installation of complete equipment for aviation-derived gas turbines General technical requirements Released on June 30, 2025 Implementation on January 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General Principles 2 5 Installation Preparation 2 6 Equipment positioning, alignment, leveling and centering 3 7 Equipment installation and fixing 5 8 Auxiliary system installation 7 9 Electrical system installation 9 10.Installation project acceptance 10 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 33632-2017 "General technical requirements for installation of complete sets of aviation-derived gas turbines" and GB/T 33632- Compared with.2017, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Added “Terms and Definitions” (see Chapter 3); b) Added the installation site conditions for offshore platforms (see 5.2.6); c) Added the allowable deviation value of steel structure foundation in "Review of Foundation" (see 6.1); d) Change “anchor bolts, washers and secondary grouting” to “equipment installation and fixation” (see Chapter 7, Chapter 6 of the.2017 edition); e) Added “base-supported equipment” and “equipment fixing on steel structure platforms” (see 7.1 and 7.5); f) Change “auxiliary equipment installation” to “auxiliary system installation” (see Chapter 8, Chapter 7 of the.2017 edition); g) "General Principles" has been deleted (see 7.1 of the.2017 edition); h) Added "Pipeline Installation" and "Valve Installation" (see 8.1 and 8.2); i) Added “Installation requirements for electrical systems for use in marine environments” in “Installation of electrical systems” (see 9.8). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Gas Turbines (SAC/TC259). This document was drafted by. AECC Gas Turbine (Zhuzhou) Co., Ltd., AECC Gas Turbine Co., Ltd., and ENN Energy Power Technology (Shanghai) Co., Ltd., Offshore Oil Engineering Co., Ltd. The main drafters of this document are. Wang Min, Shen Shidong, Zhou Dawei, Zhang Hong, and Gao Peng. This document was first published in.2017 and this is the first revision. Installation of complete equipment for aviation-derived gas turbines General technical requirements 1 Scope This document specifies the installation requirements for aviation-derived gas turbine complete sets (hereinafter referred to as "complete sets"). This document applies to the installation of complete sets of aircraft-derived gas turbines for power generation. Complete sets of aircraft-derived gas turbines for mechanical drive The equipment is implemented as a reference. 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 13675 Packaging and transportation of aviation-derived gas turbines GB/T 15135 Gas Turbine Vocabulary GB/T 38179 Requirements for gas turbines used in power generation equipment GB 50093 Specification for Construction and Quality Acceptance of Automation Instrumentation Engineering GB 50126 Industrial equipment and pipeline insulation engineering construction code GB 50166 Construction and acceptance standard for automatic fire alarm systems GB 50168 Construction and acceptance standard for cable lines in electrical installation projects GB 50169 Specification for construction and acceptance of grounding devices for electrical installation projects GB 50170 Construction and acceptance standard for rotating electrical machines in electrical installation projects GB 50171 Specification for the construction and acceptance of panels, cabinets and secondary circuit wiring for electrical installation projects GB 50231 General specification for construction and acceptance of mechanical equipment installation projects GB 50235 Industrial Metal Pipeline Engineering Construction Code GB 50236 Construction Specifications for Welding Engineering of Field Equipment and Industrial Pipelines GB 50263 Specification for Construction and Acceptance of Gas Fire Extinguishing Systems 3 Terms and Definitions The terms and definitions defined in GB/T 15135, GB/T 38179 and the following apply to this document. 3.1 foundation The load-bearing structure below the equipment installation surface. Note. Foundations generally include concrete foundations and steel structure foundations. 3.2 base support underbasesupport A device installed on the foundation to support and fix the gas turbine unit. Note. The base support is usually divided into three or more points of support. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33632-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 33632-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33632-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33632-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 33632-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33632-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
