GB/T 33523.1-2020 English PDFUS$449.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33523.1-2020: Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture Status: Valid
Basic dataStandard ID: GB/T 33523.1-2020 (GB/T33523.1-2020)Description (Translated English): Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 17.040.20 Word Count Estimation: 24,285 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Quoted Standard: GB/T 131-2006; GB/T 1182; GB/T 16901.1; GB/T 33523.2-2017; ISO 3098-2; 2000; ISO 14406; ISO 25178-3-2012; GB/T 24734.1; GB/T 24734.11; GB/T 24734.2; GB/T 24734.3; GB/T 24734.4; GB/T 24734.5; GB/T 24734.6; GB/T 24734.7; GB/T 24734.8; GB/T 24734.9; GB/T 247 Adopted Standard: ISO 25178-1-2016, MOD Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies the rules for using graphic symbols to represent the surface structure of the area in product technical documents (such as drawings, specifications, contracts, and reports). Appendix A of this standard specifies the scale and size of graphical symbols; Appendix B specifies the markings for clear surface structure requirements; see Appendix C for examples of marking area surface structure requirements; refer to Appendix D for recommended procedures for indicating intersecting planes; area surface structure Refer to Appendix E for ISO special specification elements. This standard applies to the marking of the regional surface structure of the workpiece. GB/T 33523.1-2020: Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Product Geometric Technical Specification (GPS) Surface Structure Area Method Part 1: Representation of Surface Structure) ICS 17:040:20 J04 National Standards of People's Republic of China Product Geometric Specification (GPS) Surface Structure Regional Law Part 1: Representation of Surface Structure (ISO 25178-1:2016,MOD) 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Graphical symbols for marking area surface structure 1 5 Composition of complete graphic symbols for regional surface structure 3 6 Labeling of regional surface parameters 4 7 Coordinate system 7 8 Digital product definition data 7 Appendix A (Normative Appendix) Scale and Size of Graphic Symbols 9 Appendix B (Normative Appendix) Clarify the labeling of the surface structure regulations 11 Appendix C (informative appendix) Examples of surface structure requirements for marked areas 14 Appendix D (informative appendix) shows recommended procedures for intersecting planes 16 Appendix E (informative appendix) ISO special specification elements for area surface structure 18 Appendix F (Informative Appendix) Relationship with GPS Matrix Model 20 Reference 21ForewordGB/T 33523 "Geometric Technical Specifications for Products (GPS) Surface Structure Area Law" is divided into the following parts: ---Part 1: Representation of surface structure; ---Part 2: Terms, definitions and surface structure parameters; ---Part 3: Standardized Operation Set; ---Part 6: Classification of surface structure measurement methods; ---Part 70: Physical measurement standards; ---Part 71: Software measurement standards; ---Part 72: XML file format x3p; ---Part 73: Terms and definitions for measuring surface defects of materials; --- Part 600: Metrological characteristics of the area topography measurement method; --- Part 601: Nominal characteristics of contact (stylus) instruments; ---Part 602: Nominal characteristics of non-contact (confocal chromatic aberration probe) instruments; ---Part 603: Nominal characteristics of non-contact (phase-shifting interference microscope) instruments; --- Part 604: Nominal characteristics of non-contact (coherent scanning interference) instruments; ---Part 605: Nominal characteristics of non-contact (spot autofocus) instruments; ---Part 606: Nominal characteristics of non-contact (zoom) instruments; --- Part 607: Nominal characteristics of non-contact (confocal microscope) instruments; ---Part 701: Calibration and measurement standards for contact (stylus) instruments: This part is Part 1 of GB/T 33523: This section was drafted in accordance with the rules given in GB/T 1:1-2009: This part uses the redrafting method to modify and adopt ISO 25178-1:2016 "Geometrical Technical Specifications for Products (GPS) Surface Structure Area Law Part 1: Representation of Surface Structure: Compared with ISO 25178-1:2016, this part has technical differences: The corresponding technical differences and their reasons are as follows: ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments: The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows: ● Replace ISO 1101 with GB/T 1182, which is modified to adopt international standards (see Chapter 3 and Chapter 8); ● Replace ISO 81714-1 (see Appendix A) with GB/T 16901:1 which is modified to adopt international standards; ● Replace ISO 16792 (see Chapter 3 and Chapter 8) with GB/T 24734 (all parts) that is not equivalent to international standards: This section has made the following editorial changes: ---In the "Scope" chapter, add "Appendix A of this part gives the scale and size of graphic symbols; Appendix B gives a clear table The marking of the surface structure requirements; see Appendix C for examples of the surface structure requirements of the marked area; refer to the recommended procedures for indicating intersecting planes Appendix D; For the ISO special specification elements of the regional surface structure, please refer to Appendix E "This section applies to the regional surface structure of the workpiece Mark": This part is proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240): Drafting organizations of this section: Harbin Institute of Technology, Xi'an Edward Measuring Equipment Co:, Ltd:, China Machinery Productivity Promotion Center, Central China University of Science and Technology, Tsinghua University, Shandong University, Shaanxi Institute of Metrology, China Institute of Metrology: The main drafters of this section: Liu Jian, Ming Cuixin, Song Jianzhong, Liu Xiaojun, Liu Chenguang, Wei Haoyun, Yan Peng, Liu Ying, Shi Yushu, Zhu Yue: Product Geometric Specification (GPS) Surface Structure Regional Law Part 1: Representation of Surface Structure1 ScopeThis part of GB/T 33523 specifies the use of graphical symbols to indicate areas in product technical documents (such as drawings, specifications, contracts, and reports): The rules of the domain surface structure: Appendix A of this part gives the proportions and dimensions of the graphic symbols; Appendix B gives the labels for clear surface structure regulations; the label area See Appendix C for examples of domain surface structure requirements; refer to Appendix D for recommended procedures for indicating intersecting planes; ISO special regulations for area surface structures See Appendix E for fan elements: This section applies to the marking of the regional surface structure of the workpiece:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 131-2006 Product Geometric Technical Specification (GPS) Representation of surface structure in technical product documents (ISO 1302: 2002, IDT) GB/T 1182 Geometric Technical Specification for Products (GPS) Geometric tolerance shape, direction, position and runout tolerance marking (GB/T 1182-2018,ISO 1101:2017,MOD) GB/T 16901:1 Graphical symbols for technical documents Part 1: Basic rules (GB/T 16901:1-2008, ISO 81714-1:1999, MOD) GB/T 24734 (all parts) Technical product documentation Digital product definition data general rules GB/T 33523:2-2017 Geometric Technical Specifications for Products (GPS) Surface Structure Area Law Part 2: Terms, Definitions and Tables Surface structure parameters (ISO 25178-2:2012, IDT) ISO 3098-2:2000 Technical product document text Part 2: Latin letters, numbers and symbols (Technicalproduct documentation-Lettering-Part 2:Latinalphabet,numeralsandmarks) ISO 14406 Geometrical Product Specifications (GPS) Extraction [Geometrical productspecifications(GPS)-Extrac- tion] ISO 25178-3:2012 Product Geometric Technical Specification (GPS) Surface Structure: Regional Law Part 3: Specification Operation Set [Geo- metricalproductspecifications(GPS)-Surfacetexture:Areal-Part 3:Specificationoperators]3 Terms and definitionsThe terms and definitions defined in GB/T 131, GB/T 1182, GB/T 24734 (all parts), ISO 14406 and ISO 25178-3 are applicable Used in this document:4 Graphical symbols for marking the surface structure of the areaThe requirements for the surface structure in the product technical documents can be represented by different graphic symbols: Each graphic symbol has a specific meaning: Make ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33523.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 33523.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33523.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33523.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
