Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 33380-2016 English PDF

Q: How long will the true-PDF of English version of GB/T 33380-2016 be delivered?

Upon your order, we will start to translate GB/T 33380-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 33380-2016_English with my colleagues?

Yes. The purchased PDF of GB/T 33380-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33380-2016: Rubber hoses with large diameter -- Tensile test
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33380-2016	199	Add to Cart	3 days	Rubber hoses with large diameter -- Tensile test	Valid

Similar standards

GB/T 33514 GB/T 33513 GB/T 33206 GB/T 33382

Basic data

Standard ID: GB/T 33380-2016 (GB/T33380-2016)
Description (Translated English): Rubber hoses with large diameter -- Tensile test
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G42
Classification of International Standard: 23.040.70
Word Count Estimation: 10,138
Date of Issue: 2016-12-30
Date of Implementation: 2017-07-01
Regulation (derived from): National Standard Notice No.27 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33380-2016: Rubber hoses with large diameter -- Tensile test

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber hoses with large diameter - Tensile test ICS 23.040.70 G42 National Standards of People's Republic of China Tensile test of large rubber hose assembly 2016-12-30 release 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard is nationalized by the National Rubber and Rubber Products Standardization Technical Committee Hose Subcommittee (SAC/TC35/SC1). The drafting unit of this standard. Jiangsu Taiping Rubber Co., Ltd., China Merchants Guangzhou Waterway Bureau Co., Ltd., Shenyang Rubber Research and Design Institute Limited company. The main drafters of this standard. Wang Zhaolong, Wang Ping, Zhou Dingnai, Li Guozhong, Wang Shuli, Zhang Zhiyong, Cao Xiangbo, He Dongping, Chen Xiyu, Zhang Dengtai, Zhao Ning, Zhou Chao, Liu Jing, Kong Bo. Tensile test of large rubber hose assembly Caution - Personnel using this standard should be familiar with formal laboratory procedures. This standard is not intended to involve the use of this standard may occur All the security issues. It is the user's responsibility to develop appropriate safety and health regimes and to ensure compliance with national regulations.

1 Scope

This standard specifies a test method for tensile load deformation of a large rubber hose assembly with a nominal diameter of 150 or more. This standard is applicable to the tensile test of large rubber hose assemblies with flanges at both ends.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Rubber and plastics hoses and hose assemblies - Terminology GB/T

3 terms and definitions

The following definitions and definitions of the following definitions and definitions apply to this document in GB/T 7528-2011. 3.1 Length change rate The length of the hose assembly is changed by the tensile load, expressed as a percentage of its change in value and the initial length. 3.2 ODVariationrate The change in the outer diameter of the tube of the hose assembly is caused by the tensile load, expressed as a percentage of its change in value and the initial outer diameter. 3.3 Length of permanent deformation rate The length change rate of the hose assembly when the load is removed for a certain period of time. 3.4 Outer diameter permanent deformation rate ODpermanentvariationrate The rate of change in the diameter of the tube when the hose assembly is unloaded for a certain period of time after unloading the load.

4 principle

Under the specified conditions, the hose assembly (empty tube) is horizontally stretched on the tensile tester, with one end fixed and the other end connected The hydraulic device, according to the requirements of the load recording hose assembly in the process of stretching the length of the change, the diameter of the numerical changes, calculated by the formula To the various tensile properties of the hose assembly. The schematic diagram of the test principle is shown in Fig. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33380-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33380-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33380-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33380-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.