GB/T 32800.6-2023 English PDFUS$624.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32800.6-2023: Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners Status: Valid
Basic dataStandard ID: GB/T 32800.6-2023 (GB/T32800.6-2023)Description (Translated English): Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J48 Classification of International Standard: 25.140.10 Word Count Estimation: 34,354 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 32800.6-2023: Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 25:140:10 CCSJ48 National Standards of People's Republic of China Safety requirements for handheld non-electric power tools Part 6: Power tools for assembly of threaded fasteners Hand-heldnon-electricpowertools-Safetyrequirements- (ISO 11148-6:2012,IDT) Published on 2023-11-27 2024-06-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 3:1 General terms and definitions 2 3:2 Specific terms and definitions for assembly power tools for threaded fasteners 4 4 Safety requirements and/or protective measures 5 4:1 General 5 4:2 Machinery safety 5 4:3 Thermal safety 5 4:4 Noise reduction 6 4:5 Vibration 6 4:6 Materials and substances processed, discarded or discharged 6 4:7 Ergonomics 7 4:8 Control device 8 5 inspection 9 5:1 General test conditions 9 5:2 Noise 9 5:3 Vibration 9 5:4 Unexpected start 9 5:5 Power tool structure 9 5:6 Inspection items for safety requirements 9 6 Usage information10 6:1 Logo, signs and warnings10 6:2 User Manual 11 6:3 Operating Instructions 15 6:4 Performance Parameters 15 6:5 Care instructions 16 Appendix A (Informative) List of Noteworthy Hazards 17 Appendix B (informative) Examples of assembly power tools for threaded fasteners covered by this document 19 Appendix C (normative) Symbols for signs and signs 21 C:1 Symbols for signage and marking regulations 21 C:2 Symbols for reference on signs and signs 22 Appendix D (normative) Additional safety requirements for internal combustion power tools23 D:1 Overview 23 D:2 Hazard List 23 D:3 Safety requirements and measures23 D:4 Usage information 24 Reference 26 Figure 1 Reaction rod 7 Figure 2 Auxiliary handle 8 Figure 3 Cantilever 8 Figure 4 Reasonable arrangement of the control device located on the upper part of the handle 8 Figure B:1 Fastener installation tool (straight handle type) 19 Figure B:2 Screwdriver (straight handle) 19 Figure B:3 Nut wrench (angle type) 19 Figure B:4 Ratchet wrench 19 Figure B:5 Open-end wrench 19 Figure B:6 Fastener installation tool (gun handle type) 19 Figure B:7 Screwdriver (gun handle type) 19 Figure B:8 Nut wrench (gun handle type) 20 Figure B:9 Impact or hydraulic pulse gas trigger (gun handle type) 20 Table 1 Inspection items 10 Table A:1 List of hazards worth noting17 Table C:1 Symbols for signage and marking regulations 21 Table C:2 Symbols for reference on signs and signs 22 Table D:1 Hazard list of tools powered by internal combustion engines23ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 6 of GB/T 32800 "Safety Requirements for Handheld Non-Electric Power Tools": GB/T 32800 has been released The following sections are included: ---Part 1: Assembly power tools for non-threaded structural fasteners; ---Part 2: Cutting off and withholding power tools; ---Part 3: Drilling and tapping machines; ---Part 4: Pure impact power tools; ---Part 5: Rotary impact drilling tools; ---Part 6: Assembly power tools for threaded fasteners; ---Part 8: Grinding and polishing machines; ---Part 9: Grinding machines for molds; ---Part 10: Extrusion power tools; ---Part 11: Punching and shearing machines and scissors: This document is equivalent to ISO 11148-6:2012 "Safety requirements for hand-held non-electric power tools Part 6: Threaded fasteners" Assembling Power Tools": Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Rock Drilling Machinery and Pneumatic Tools Standardization Technical Committee (SAC/TC173): This document was drafted by: Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Quzhou Metrology and Quality Inspection Research Institute, Zhejiang Rongpeng Pneumatic Tools Co:, Ltd:, Changsha Mining and Metallurgy Research Institute Co:, Ltd:, and Guangdong New Bix Industrial Co:, Ltd: The main drafters of this document: Wang Jianzu, Xu Xiaojie, Yang Fazheng, Chen Shiping, Zeng Yihua, Xu Zhongchen:IntroductionIn order to standardize the safety requirements for handheld non-electric power tools to protect the personal health of operators and the safety of equipment and the environment, international standards The chemical organization has released ISO 11148, a total of 13 parts of documents: Our country plans to adopt the 13 partial documents of ISO 11148 on an equal basis and formulate them as The corresponding documents of each part of GB/T 32800: GB/T 32800 is planned to be composed as follows: ---Part 1: Assembly power tools for non-threaded structural fasteners: Covers riveting machines, riveting or plug tools, broken rod locking bolts Tools, mandrel riveting tools, rivet nut holders: ---Part 2: Cutting off and withholding power tools: Covers non-yoke crimpers, cutters, cutting tools, cutting pliers, and crimping pliers: ---Part 3: Drilling and tapping machines: Covers drills, double-handle heavy-duty drills, and tapping machines: ---Part 4: Pure impact power tools: Covers crushers, chisels, shovels, engraving pens, rust removal hammers, picks, portable pile drivers, Printing machine, tamping machine, stone hammer, shovel, tamping machine: ---Part 5: Rotary impact drilling tools: Covers small blasthole drills, rock drills, and rotary hammers: ---Part 6: Power tools for assembly of threaded fasteners: Covers hydraulic pulse gas triggers, impact wrenches, fastener installation tools, Nut wrenches, open-end wrenches, ratchets, screwdrivers: ---Part 7: Grinder: Covers grinding grinders, cutting grinders, polishers and grinders using bowl and leaf wheels: ---Part 8: Grinding and polishing machines: Covers belt polishers, skateboard polishers, polishing machines, compound polishers, and rotary polishers: Optical machine, linear polishing machine: ---Part 9: Grinding machines for molds: Covers grinders for angle molds, reciprocating files, rotary files, and sand for linear molds Turbine: ---Part 10: Extrusion power tools: Covers crimping tools, ring parts separators, metal forming tools, nut splitters, Extruders, printers, extrusion riveters, cutting tools with parallel blades, jaw extrusion pliers: ---Part 11: Punching and shearing machines and scissors: Covers punching and shearing machines and scissors: ---Part 12: Disc, pendulum and reciprocating saws: Covers disc saws, circular cutters, saw blades with a radius of less than 50mm, or Oscillating saws with diamond cutting blades with a radius of less than 100 mm, oscillating cutters, and reciprocating saws including fine saws and hack saws: ---Part 13: Fastener driving tools: Safety requirements for handheld non-electric power tools Part 6: Power tools for assembly of threaded fasteners1 ScopeThis document specifies hand-held non-electric power tools used for tightening or installing threaded fasteners (hereinafter referred to as "assembly tools for threaded fasteners"): Safety requirements for "Power Tools"): Power tools for assembling threaded fasteners can be driven by compressed air, hydraulic oil or internal combustion engines: When using or For use by one operator with the support of one or both hands without the use of suspension devices (such as balancing devices): This document applies to the following products: ---Hydraulic pulse gas trigger; ---Impact wrench; ---Fastener installation tools; ---Nut wrench; ---Open-end wrench (open-claw socket or pipe nut wrench); ---Ratchet wrench; ---screwdriver: Note 1: See Appendix B for examples of power tools used to assemble threaded fasteners: This document does not apply to special requirements and modifications of threaded fasteners for the purpose of mounting them on clamping devices with assembly power tools: This document covers power tools used to assemble threaded fasteners other than those used in potentially explosive atmospheres: All noteworthy hazards, dangerous situations or hazardous events when using the tool under foreseeable misuse conditions: Note 2: EN13463-1 gives requirements for the use of non-electrical equipment in potentially explosive environments:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 15706-2012 General principles for mechanical safety design risk assessment and risk reduction (ISO 12100:2010, IDT) ISO 3857-3 Glossary of compressors, pneumatic tools and machinery Part 3: Pneumatic tools and machinery (Compressors, Note: GB/T 6247:4-2013 Rock drilling machinery and portable power tools terminology Part 4: Performance test (ISO 3857-3:1989, MOD) Note: GB/T 6247:1-2013 Rock drilling machinery and portable power tools terminology Part 1: Rock drilling machinery, pneumatic tools and pneumatic machinery (ISO 5391:2003,MOD) anddieselfuel) ISO 13732-1 Ergonomics of thermal environments Methods for evaluation of human response to contact surfaces Part 1: Thermal surfaces (Ergo- surfaces-Part 1:Hotsurfaces) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32800.6-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 32800.6-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32800.6-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32800.6-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
