GB/T 32250.4-2022 English PDFUS$334.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32250.4-2022: Agricultural and forestry machinery - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers Status: Valid
Basic dataStandard ID: GB/T 32250.4-2022 (GB/T32250.4-2022)Description (Translated English): Agricultural and forestry machinery - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Word Count Estimation: 18,145 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 32250.4-2022: Agricultural and forestry machinery - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Agricultural and forestry machinery - Inspection of sprayers in use - Part 4.Fixed and semi-mobile sprayers ICS 65.060.40 CCSB91 National Standards of People's Republic of China Inspection of agricultural and forestry machinery in-use sprayers Part 4.Stationary and semi-mobile sprayers Part 4.Fixedandsemi-mobilesprayers (ISO 16122-4.2015, IDT) Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 4 of GB/T 32250 "Detection of Sprayers in Use for Agricultural and Forestry Machinery". GB/T 32250 has been released to the next part. --- Part 1.General; --- Part 2.Horizontal boom sprayers; --- Part 3.Sprayers for shrub and tree crops; --- Part 4.Stationary and semi-mobile sprayers. This document is equivalent to ISO 16122-4.2015 "Testing of agricultural and forestry machinery in use sprayers - Part 4.Stationary and semi-mobile Sprayer". Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201). This document is drafted by. Fujitec Co., Ltd., China Academy of Agricultural Mechanization, Jiangsu University, Agricultural Machinery Test of the Ministry of Agriculture and Rural Affairs Inspection and Identification Station, Anhui Agricultural University, National Agricultural Machinery Quality Supervision and Inspection Center. The main drafters of this document. Jin Chen, Lin Xiaman, Yang Yating, Ma Lingjuan, Wu Chundu, Hou Chong, Chen Jiankang, Zhou Haiyan, Chen Liqing, Liang Xiaoen, Yan Herong.IntroductionThe sprayer is mainly used for spraying insecticides, herbicides, fungicides, defoliants and other plant protection products to prevent and control crop diseases, pests and weeds, improve High yield per unit area plays an irreplaceable and important role, and it is widely used and involves a wide variety of products. The sprayer sprays the plant protection product on the target with the goal of spraying only the amount required by the target, contaminating operators and off-target streams The amount of drug lost to the environment is kept to a minimum. Under normal use and regular maintenance, a properly designed and well-made sprayer should be able to Normal continuous operation. However, after the sprayer is used in the field, it often produces serious abrasion and damage, even in comparison with the level of agricultural production technology. In advanced areas, it is also difficult to achieve adequate maintenance. Therefore, clarifying the use requirements and testing methods of the sprayer in use is beneficial to the use of the sprayer. The test of spraying equipment, prolong the normal continuous operation time of the sprayer in use, reduce the use of pesticides, improve the safety and work efficiency. At present, in terms of the safety of plant protection machinery and the potential risks of environmental pollution, there are GB 10395.6 "Agriculture and Forestry Tractors and Machinery Machinery Safety Technical Requirements Part 6.Plant Protection Machinery, GB/T 39515 Environmental Requirements for Agricultural and Forestry Machinery Sprayers, etc. Standard, the design and manufacture requirements and performance test methods of sprayer products are specified. However, standardizing the testing requirements and methods for in-use sprayers does not Only the initial performance of the sprayer needs to be considered, but also factors such as use, maintenance and repair to ensure that the sprayer continues to perform in good condition. According to the structure and product type of international standards, GB/T 32250 "Testing of Sprayers in Use of Agricultural and Forestry Machinery" currently consists of 4 parts constitute. --- Part 1.General; --- Part 2.Horizontal boom sprayers; --- Part 3.Sprayers for shrub and tree crops; --- Part 4.Stationary and semi-mobile sprayers. This document is Part 4 of GB/T 32250 and is used together with GB/T 32250.1. Inspection of agricultural and forestry machinery in-use sprayers Part 4.Stationary and semi-mobile sprayers1 ScopeThis document is used together with GB/T 32250.1-2022 and specifies the technical requirements and tests for stationary and semi-mobile sprayers in use. test method. The technical requirements mainly relate to the potential risk of environmental pollution caused by the sprayer and the performance of the equipment to achieve good spraying results. This document does not apply to sprayers for confined space treatment (eg fog machines). Note. GB/T 32250.1-2022 specifies the protection requirements for inspectors during the test.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 20183.2-2006 Plant Protection Mechanical Spray Equipment Part 2.Test Methods for Hydraulic Sprayers (ISO 5682-2. 1997, IDT) GB/T 32250.1-2022 Testing of agricultural and forestry machinery in use sprayers - Part 1.General (ISO 16122-1.2015, IDT)3 Terms and DefinitionsThe terms and definitions defined in GB/T 32250.1-2022 and the following apply to this document. 3.1 fixedsprayer For spraying plant protection agents, one-piece construction, its pump/tank parts (see 3.3) and/or applicator (see 3.4) are not removable. 3.2 semi-mobile sprayer semi-mobile sprayer For spraying plant protection agents, monolithic structure, its pump/solution tank part (see 3.3) and applicator (see 3.4) can be moved separately. [Source. GB/T 39515.4-2020, 3.2] 3.3 Pump/tank unit pump/tankunit Contains at least the parts of the pump and tank. Note. The pump and tank can be combined components, or separate independent components. 3.4 applicator applicationunit Consists of one or more spray heads/spray generators, with or without airflow assist, via spray hose and separate pump/reservoir Parts are used together. [Source. GB/T 39515.4-2020, 3.4] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32250.4-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 32250.4-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32250.4-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32250.4-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
