GB/T 32246-2015 English PDF

US$138.00 · In stock
Delivery: <= 1 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32246-2015: GH 141 alloy forgings -- General specification
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32246-2015	138	Add to Cart	1 days	GH 141 alloy forgings -- General specification	Valid

Similar standards

GB/T 33083   GB/T 33084   GB/T 33201   GB/T 32249   GB/T 32248   

Basic data

Standard ID: GB/T 32246-2015 (GB/T32246-2015)
Description (Translated English): GH 141 alloy forgings -- General specification
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J32
Classification of International Standard: 77.120.40
Word Count Estimation: 8,814
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Quoted Standard: GB/T 222; GB/T 223; GB/T 230.1; GB/T 2039; GB/T 4338; GB/T 6394; GB/T 6402; GB/T 14999.2
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the GH141 alloy forgings requirements, quality assurance provisions and delivery preparation. This standard applies to GH141 alloy forgings (hereinafter referred to as "forging").

GB/T 32246-2015: GH 141 alloy forgings -- General specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GH 141 alloy forgings - General specification ICS 77.120.40 J32 National Standards of People's Republic of China GH141 alloy forgings - General technical requirements Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Requirements 1 4 Quality assurance provision 3 Prepare 4 5 Delivery 6 Ordering Document 5

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Standardization Technical Committee Forging (SAC/TC74) and focal points. This standard was drafted. Guizhou Anda Aviation Forging limited liability company, Beijing Institute of Electrical and Jiang Su Baojie Forging Limited. The main drafters of this standard. Chenzu Xiang, Wei Zhijian, gold red, Gan Yuan, Chen Wenjing, land in spring. GH141 alloy forgings - General technical requirements

1 Scope

This standard specifies the GH141 alloy forgings requirements, quality assurance provisions and delivery preparation. This standard applies to GH141 alloy forgings (hereinafter referred to as "forging").

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 222 chemical composition of finished steel tolerance GB/T 223 (all parts), steel and alloy chemical analysis method GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard ruler) Creep Test Methods GB/T 2039 metal material uniaxial stretching GB/T 4338 high-temperature metallic materials - Tensile testing GB/T 6394 Determination of average grain size of metal GB/T 6402 Steel Forgings Ultrasonic Testing Method GB/T 14999.2 superalloys Test methods - Part 2. Horizontal macrostructure and defect acid leaching test

3 Requirements

3.1 raw materials Forging raw materials by vacuum induction melting plus vacuum arc remelting or vacuum induction melting plus ESR smelting method of production, Smelting methods used should be specified in the contract and the quality certificate. 3.2 Chemical composition 3.2.1 The chemical composition of the alloy should meet the requirements in Table 1. Table 1 Alloy Chemical Composition% (mass fraction) Elements Cr Mo Al Ti Co B Ni Content ≥18.00 ~ 20.00 ≥9.00 ~ 10.50 ≥1.40 ~ 1.70 ≥3.00 ~ 3.30 ≥10.00 ~ 12.00≥0.003 ~ 0.010 margin Element C Cu Fe Si Mn PS Zr Content ≤0.12 ≤0.50 ≤5.00 ≤0.50 ≤0.10 ≤0.015 ≤0.015 ≤0.07 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32246-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32246-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 24 hours. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32246-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32246-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.