GB/T 32235.2-2024 English PDFUS$1434.00 · In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32235.2-2024: Industrial process measurement, control and automation - Digital factory framework - Part 2: Model elements Status: Valid
Basic dataStandard ID: GB/T 32235.2-2024 (GB/T32235.2-2024)Description (Translated English): Industrial process measurement, control and automation - Digital factory framework - Part 2: Model elements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 25.040 Word Count Estimation: 72,766 Date of Issue: 2024-08-23 Date of Implementation: 2024-08-23 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 32235.2-2024: Industrial process measurement, control and automation - Digital factory framework - Part 2: Model elements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. National Standard of the People's Republic of China ICS 25.040CCS N 10 Industrial process measurement, control and automation Digital Factory Framework Part 2.Model Elements Industrial process measurement, control and automation-Digital factory framework-Part 2.Model elements (IEC 62832⁃2.2020, IDT) 2024-08-23 Release 2025-03-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface Ⅲ Introduction Ⅳ 1 Scope...1 2 Normative references 1 3 Terms, Definitions, Abbreviations and Conventions 1 3.1 Terms and Definitions 1 3.2 Abbreviations 1 3.3 Conventions for representing model element definitions 2 4 Definition of DataElementTypes 4 4.1 Overview 4 4.2 ConceptIdentifier...4 4.3 DataValue...4 4.5 Description...5 4.6 DETcategory...5 4.7 DFMdataType...6 4.9 ElementIdentifier...6 4.10 ItemCode...7 4.11 LetterSymbol...7 4.12 ParentModelElement...7 4.13 PhysicalUnit...8 4.14 PreferredName...8 4.15 PSassetIdentifier...8 4.16 ReferenceToCDEL...9 4.19 ReferenceToDET...10 4.20 ReferenceToDFasset...10 4.26 RuleOfRelationship...12 4.27 SearchSpace...12 4.28 SupplierName...12 4.29 SynonymousName...13 4.30 Technical Discipline...13 4.31 TimeCreated...14 4.32 TimeStamp...14 4.33 ValueQuality...14 4.34 VersionIdentifier...15 4.35 VersionNumber...15 5 Definition of Model Elements 16 5.1 Overview 16 5.2 Dictionary-related model elements 16 5.3 Model elements related to DataElement 23 5.4 Model elements related to libraries 24 5.5 Model elements related to digital factories 32 Appendix A (Normative) Data Type Specifications 37 Appendix B (Normative) The corresponding relationship between the naming of GB/T 32235.1 and this document 38 Appendix C (Informative) Mapping of DF model elements to different data standards 41 Appendix D (Informative) UML Model ...49 Appendix E (Informative) UML Notation 57 References 61ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document is Part 2 of GB/T 32235.GB/T 32235 has been published in the following parts. --Part 1.General requirements; --Part 2.Model elements. This document is equivalent to IEC 62832-2.2020 "Industrial process measurement, control and automation digital factory framework Part 2.Model Type Elements. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Industrial Process Measurement, Control and Automation (SAC/TC 124). This document was drafted by. Shenyang University of Technology, Mechanical Industry Instrumentation Comprehensive Technology and Economic Research Institute, Shenyang Hongyu Technology Co., Ltd. Co., Ltd., Hebei University of Technology, Supcon Technology Co., Ltd., Anhui University of Technology, CITIC Dicastal Co., Ltd., MCC Huatian Engineering Technology Co., Ltd., Futaihua Industry (Shenzhen) Co., Ltd., Donghua Engineering Technology Co., Ltd., Zhejiang University of Technology, Siemens (China) Co., Ltd., Zhejiang Technology Innovation Service Center, Zhejiang Sci-Tech University, Electric Power Planning and Research Institute Co., Ltd., Tianjin University, China University of Metrology, Schneider Electric (China) Co., Ltd., Rockwell Automation (China) Co., Ltd. Beijing Branch, Chongqing Chuanyi Automation Co., Ltd. Company, Jiangsu Quality and Standardization Research Institute, Zhejiang Mobile Information System Integration Co., Ltd., Shaanxi Yanchang Petroleum (Group) Co., Ltd. company. The main drafters of this document are. Zhang Xiaoling, Wang Chengcheng, Wang Shijie, Sun Qiuye, Wang Jing, Gao Guoping, Liu Jing, Yu Wenguang, Shen Hao, Huang Liang, Shi Zhe, Fang Tian, Xia Yuhuan, Yao Minghai, Zhu Guoliang, Xu Yuzhen, Guo Qing, Huang Jing, Zhang Jinbin, Dong Feng, Xu Bin, Zhao Jing, Wang Chunxi, Huang Yu, Yan Xinhua, Gao Jingmei, Tian Yingming, Zhao Jia, Chen Zhengsheng, Wei Xinyuan, Lv Wentao, Qian Lili, Gui Feng, Lin Ning, Ye Dong, Zhang Xueqin, Dong Yongfeng.IntroductionGB/T 32235 provides a framework for establishing and maintaining a digital representation of a production system, including production system elements and this The framework is also used to support the exchange of information about these elements. The framework aims to reduce interoperability barriers to information exchange for various activities related to production systems. The main advantage of this approach is that All information related to a production system is described in a standardized way and can be used and modified throughout its life cycle. The methods defined in GB/T 32235 are kept as general as possible so that they can be applied in multiple industrial fields. GB/T 32235.1 describes the general principles of the DF reference model and its most important model elements, while this document provides the DF reference model. Consider technology-independent definitions of all model elements in the model. This document aims to provide a guide for implementing the DF framework using different technologies (e.g. different dictionary technologies and different engineering data formats). Annex C provides recommendations for such implementation. This document provides data type specifications that enable mapping of DF schemas to different dictionaries. 3.3 describes two types of presentation templates, namely, templates for specific data element types DataElementTypes and templates for model elements. Model elements templates. Based on these templates, Chapter 4 defines specific data element types DataElementTypes, and Chapter Chapter 5 gives the definition of Model elements using DataElementTypes. To make the framework widely applicable, the requirements for both sets of definitions are kept to a minimum. If the concepts of the DF framework are applied to provide model elements for different engineering domains, domain-specific data specifications (e.g. Based on IEC 62656-1). GB/T 32235 is proposed to consist of three parts. --Part 1.General requirements. The purpose is to specify the general requirements of the digital factory framework, such as the production system asset model, relationship model, information flow, etc. Use aspect. --Part 2.Model elements. The purpose is to specify the data element types, templates, model elements and other related aspects of the digital factory framework. Require. -- Part 3.Digital factory application for full life cycle management of production systems. The purpose is to standardize the digital factory application for full life cycle management of production systems. Digital factory framework rules for cycle information. Industrial process measurement, control and automation Digital Factory Framework Part 2.Model Elements1 ScopeThis part specifies the specific requirements for the Digital Factory Framework (DF Framework) model elements. This part defines the information provided by the model elements. Features, not the format of the information. Note. For general requirements of main model elements of DF reference model, see GB/T 32235.1.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 32235.1-2024 Digital factory framework for industrial process measurement, control and automation Part 1.General requirements (IEC 62832⁃1.2020, IDT) ISO /TS 29002-5 Industrial automation systems and integrated characteristic data exchange Part 5.Authentication schemes (Industrial automation systems and integration-Exchange of characteristic data-Part 5.Identification scheme) ISO /IEC 6523 Information technology - Structure for the identification of organizations and parts of organizations) IETF RFC 3986 Uniform Resource Identifier (URI). Generic Syntax Syntax)] 3 Terms, definitions, abbreviations and conventions 3.1 Terms and Definitions The terms and definitions defined in GB/T 32235.1-2024 apply to this document. 3.2 Abbreviations The following abbreviations apply to this document. CDEL. Collection of Data Elements DER. Data Element Relationship DET. Data Element Type DF. Digital Factory (as a qualifier) DLOP. Device List of Properties IC. Item Code ID. Identifier IRDI. International Registration Data Identifier LOP. List of Properties OLOP. Operational List of Properties ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32235.2-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 32235.2-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32235.2-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32235.2-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
