GB/T 32076.4-2015 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32076.4-2015: High-strength structural bolting assemblies for preloading -- Part 4: System HV -- Hexagon bolt with large width across flats and nut assemblies
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32076.4-2015	399	Add to Cart	4 days	High-strength structural bolting assemblies for preloading -- Part 4: System HV -- Hexagon bolt with large width across flats and nut assemblies	Valid

Similar standards

GB/T 33943   GB/T 35481   GB/Z 32564   GB/T 32076.11   GB/T 32076.10   GB/T 32076.9   

Basic data

Standard ID: GB/T 32076.4-2015 (GB/T32076.4-2015)
Description (Translated English): High-strength structural bolting assemblies for preloading -- Part 4: System HV -- Hexagon bolt with large width across flats and nut assemblies
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J13
Classification of International Standard: 21.060.10; 21.060.20
Word Count Estimation: 19,121
Date of Issue: 2015-10-09
Date of Implementation: 2016-06-01
Regulation (derived from): National Standard Announcement 2015 No.31
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32076.4-2015: High-strength structural bolting assemblies for preloading -- Part 4: System HV -- Hexagon bolt with large width across flats and nut assemblies

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
High-strength structural bolting assemblies for preloading - Part 4. System HV - Hexagon bolt with large width across flats and nut assemblies ICS 21.060.10; 21.060.20 J13 National Standards of People's Republic of China Preload high-strength bolted connection structure vice Part 4. HV type hexagon bolts and Deputy nuts Part 4. SystemHV-Hexagonboltwithlargewidthacrossflats Issued on. 2015-10-09 2016-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 32076 "pre-load high-strength bolted connection structure Vice" includes the following sections. --- Part 1. General requirements; --- Part 2. Pre-load adaptability; Part --- Section 3. HR type hexagon bolts and nuts deputy; Part --- Chapter 4. HV type hexagon bolts and nuts deputy; --- Part 5. Plain washers; --- Part 6. chamfered flat washers; Part --- Article 7. M39 ~ M64 hexagon bolts and nuts. This section is GB/T Part of 432,076. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. Shanghai Shen Guang high strength bolts Co., Ltd. Shanghai high strength bolts factory, Shanghai Jinma High Strength Fastener Co., Ltd., Ningbo Fastener Manufacturing Co., Ltd. Lianyungang Xing Yi Fasteners Ltd., Shandong high-strength fasteners Limited Division of Jiangsu to fasten Technology Development Co., Ltd., Zhejiang Industrial Co., Ltd. Ye Ling, Shaanxi Haifeng Petroleum Machinery Manufacturing Co., Ltd., Beijing Jin Wind Kechuang Wind Power Equipment Co., Ningbo Beijing Electrical Technology Co., Ltd. Xuzhou Ruida Fastener Co., Ltd., Jilin Province TRW Wind Power Equipment Co., Ltd. Jin billion industry, general industrial machinery parts and components product quality supervision and inspection center. This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners. Preload high-strength bolted connection structure vice Part 4. HV type hexagon bolts and Deputy nuts

1 Scope

GB/T 32076 in this part of the GB/T 32076.1 specifies the thread size of M12 ~ M36, a large hexagonal series, the performance rating 10.9/10, HV type, preload connected high-strength structural bolting bolts and nuts. This part of the design allows the bolts and nuts vice preload ≥0.7Rm × A1) s, and is mainly composed of a threaded plastic deformation screwed guarantee Extended performance. To this end, part shall have the following characteristics. --- Nut height approximately 0.8D; --- Short length of the thread bolts. This section provides the nuts and bolts connecting deputy, it should also include washers press GB/T 32076.6 requirements. Note. In order to obtain satisfactory results, ensure the correct use of the bolt is very important. About the right way to use, consult or refer to the relevant specification. Preload aptitude test see GB/T 32076.2. This section applies to industrial and civil construction, bridge, tower mast structure, boiler steel structure, lifting machinery and other steel structures preload connection The high strength bolts. Appendix A gives the nuts and bolts connecting deputy general clamping length and clamping length. Appendix B gives the European steel bolting two application types described. 1) Rm is the nominal tensile strength, As is the nominal thread stress area.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 90.1 Fasteners acceptance inspection GB/T 90.2 Fasteners marking and packaging GB/T 193 common thread diameter and pitch series GB/T 1237 marking method fasteners GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs GB/T 3098.2 Mechanical properties of fasteners GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts GB/T 3104 Fasteners Hexagon width across products GB/T 5267.2 fasteners non-electrolytic zinc flake coating GB/T 5267.3 Fasteners hot dip galvanized coatings GB/T 5779.1 Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements GB/T 5779.2 nut fastener surface defects GB/T 9145 common thread moderate accuracy, limit the size of the preferred series GB/T 22028 hot dip galvanized zinc coating on the housing threaded inner thread ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32076.4-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32076.4-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32076.4-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32076.4-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.