GB/T 31311-2014 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31311-2014: Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31311-2014	209	Add to Cart	3 days	Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method	Valid

Similar standards

GB/T 5195.1   GB/T 5195.12   GB/T 3286.8   GB/T 32549   GB/T 31313   GB/T 31312   

Basic data

Standard ID: GB/T 31311-2014 (GB/T31311-2014)
Description (Translated English): Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D52
Classification of International Standard: 73.080
Word Count Estimation: 9,925
Date of Issue: 12/5/2014
Date of Implementation: 9/1/2015
Quoted Standard: GB/T 6005; GB/T 6682; GB/T 22564
Adopted Standard: ISO 9779-1993, MOD
Regulation (derived from): Announcement of Newly Approved National Standards 2014 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the solvent extraction of fluorite lead content by atomic absorption spectrometric method. This Standard is applicable to the determination of lead content in metallurgical grade fluorspar in measurement range (mass fraction) of 0.

GB/T 31311-2014: Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallurgical-grade fluorspar.Determination of lead content.Solvent extraction atomic absorption spectrometric method ICS 73.080 D52 National Standards of People's Republic of China (ISO 9779.1993, MOD) Issued on. 2014-12-05 2015-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the redrafted law revision using ISO 9779.1993 "Determination of metallurgical grade fluorspar solvent extraction atomic absorption of lead content Income spectroscopy. " This standard and ISO 9779.1993 as compared to the main job of the following changes. --- Normative references used in place of national standards with international standards corresponding; --- Increased sodium iodide reagent, ascorbic acid, trioctylphosphine oxide, lead oxide, mass fraction ≥99.9%, calcium carbonate and hydrochloric acid, ρ = 1.19g/mL of terms; --- Increase the work requirement indicators atomic absorption spectrometer; --- Pear-shaped separating funnel volume 100mL revised to 125mL; --- Platinum dish is amended as platinum dish or polytetrafluoroethylene beaker; --- Increasing the number of measurements of the sample; --- Preparation of calibration solution obtained by dissolving the sample in line with the procedures carried out at the same time remove the Table 1; --- Increase in the content of the calculation results are shown; --- Increasing the precision of the standard; --- Added Appendix A to accept the results of sample analysis program flowchart; --- Made editorial changes, mergers and modify the description about the operation of the instrument and the calibration solution prepared. The standard proposed by China Iron and Steel Association. This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized. This standard was drafted. Ningbo Inspection and Quarantine Institute of Science and Technology, Metallurgical Industry Information Standards Institute. The main drafters of this standard. forest edge, Zheng Lin, Wang Yan, shall pine, Huang Shijie, Wang Tingting, Liu Mei, Zhang Jianbo, Chou Jinhui, Wang Jiang. Determination of lead content of metallurgical grade fluorspar Solvent Extraction - Atomic Absorption Spectrometry Warning --- personnel should use this standard regular laboratory work experience. This standard does not point out all possible security asked question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.

1 Scope

This standard specifies the fluorite solvent extraction of lead content by atomic absorption spectrometric method. This standard applies to the determination of lead content in metallurgical grade fluorspar in measurement range (mass fraction) of 0.0006% to 0.01%.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Basic dimensions GB/T 6005 Test sieves - Metal wire cloth, perforated plate and electroformed sheet mesh (GB/T 6005- 2008, ISO 565.1990, MOD) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB/T 22564 fluorite sampling and sample preparation (GB/T 22564-2008, ISO 8868. 1989, IDT) Principle 3 Sample with nitric acid, a mixed acid of hydrofluoric acid and perchloric acid digestion, after evaporated, dissolved in hydrochloric acid salts, diluted with distilled water trioctyl 4-methyl-2-pentanone solution was extracted lead oxide to form a sample solution. By atomic absorption spectrometry, air - acetylene flame, the female lead in hollow Pole lamp, measuring the absorbance of lead test solution at a wavelength of 283.3nm place, according to the quantitative relationship between the analyte concentration and the absorbance is calculated Content measured elements.

4 Reagents

Unless otherwise stated, use only reagents of recognized analytical grade and in line with GB/T 6682 stipulated two water purity or rather their Of water. 4.1 sodium iodide. 4.2 ascorbic acid. 4.3 trioctylphosphine oxide. 4.4 lead powder mass fraction ≥99.9%. 4.5 calcium carbonate. 4.6 4-methyl-2-pentanone. Hydrochloric acid 4.7, ρ = 1.19g/mL. Nitric acid 4.8, ρ = 1.42g/mL. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31311-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31311-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31311-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31311-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.