GB/T 31301.7-2020 English PDF

US$629.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31301.7-2020: Footwear manufacturing machines - Safety requirements - Part 7: Milling and engraving machines
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31301.7-2020	629	Add to Cart	6 days	Footwear manufacturing machines - Safety requirements - Part 7: Milling and engraving machines	Valid

Similar standards

GB 19865   GB/T 31301.8   GB/T 31301.6   GB/T 31301.2   

Basic data

Standard ID: GB/T 31301.7-2020 (GB/T31301.7-2020)
Description (Translated English): Footwear manufacturing machines - Safety requirements - Part 7: Milling and engraving machines
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y99
Classification of International Standard: 61.080
Word Count Estimation: 34,384
Date of Issue: 2020-04-28
Date of Implementation: 2020-11-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 31301.7-2020: Footwear manufacturing machines - Safety requirements - Part 7: Milling and engraving machines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Footwear manufacturing machines--Safety requirements--Part 7. Milling and engraving machines ICS 61.080 Y99 National Standards of People's Republic of China Safety requirements for shoemaking machinery Part 7. Milling machine and engraving machine 2020-04-28 release 2020-11-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Contents

Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Safety requirements/protective measures 3 5 Verification of safety requirements/protective measures 7 6 Usage Information 10 Appendix A (Informative Appendix) List of Major Hazards 12 Appendix B (informative appendix) Model diagram 14 Appendix C (Normative) Requirements for protective devices 20 Appendix D (Normative Appendix) Requirements for Interlock Guards 21 Appendix E (Normative) Requirements for trip devices 22 Appendix F (Normative Appendix) Requirements for Keep-Operation Control Devices 25 Appendix G (Normative Appendix) Requirements for Pressure Sensitive Pads and Pressure Sensitive Boards 26 Appendix H (Informative Appendix) Specifications for noise testing of milling and engraving machines 27

Foreword

GB/T 31301 "Safety Requirements for Shoemaking Machinery" is divided into the following parts. --- Part 1. Stretching machine; --- Part 2. Nail Heeling Machine; --- Part 3. Sanding and polishing machines; --- Part 4. Footwear Forming Machine; --- Part 5. Leather cutting machine, trimming machine and cutting machine; --- Part 6. Glue machine and glue dryer; --- Part 7. Milling machine and engraving machine; --- Part 8. Setting machine. This part is Part 7 of GB/T 31301. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part is proposed by China National Light Industry Council. This part is under the jurisdiction of the National Light Industry Machinery Standardization Technical Committee (SAC/TC101). This section was drafted by. Dongguan North-South Testing Technology Co., Ltd., Shenzhen Goode Automation Equipment Co., Ltd., Guangzhou Quanye Machine Machinery Technology Co., Ltd., Quzhou Taiwei Precision Machinery Co., Ltd., China Leather Shoe Research Institute Co., Ltd. The main drafters of this section. Zhao Weiping, Tu Taoyong, Liu Zhongzheng, Tong Xiaozhong, Li Gang.

Introduction

This part of GB/T 31301 belongs to the Class C standard of GB/T 15706-2012. The machinery covered in this section and the scope of hazards, hazardous conditions and hazardous events are given in Chapter 1. When the requirements of this part are different from those in GB/T 15706-2012 Class A standard or Class B standard, For the machines designed and manufactured, the requirements of this part are preferred. Safety requirements for shoemaking machinery Part 7. Milling machine and engraving machine

1 Scope

This part of GB/T 31301 specifies the definition, design, structure, transportation, installation, adjustment, operation, cleaning and cleaning of milling machines and engraving machines. Relevant safety requirements for maintenance. This part contains the operator's expected use of the milling machine and engraving machine and the foreseeable misuse, and All major hazards, dangerous states and dangerous events related to milling machines and engraving machines within the scope of this section (see Appendix A). This part is applicable to milling machines and engraving machines (models for obtaining shoe parts or lasts by using the method of cutting and removing materials in the shoe industry) For a schematic diagram, see Appendix B). This section does not apply to machines for punching, grinding and chipping.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 3766 General rules and safety requirements of hydraulic transmission system and its components GB/T 5226.1-2019 Mechanical Electrical Safety Mechanical Electrical Equipment Part 1. General Technical Conditions GB/T 7932 Pneumatic general rules and safety requirements for the system and its components GB/T 8196-2018 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards GB/T 14048.5-2017 Low-voltage switchgear and control equipment Part 5-1. Control circuit appliances and switching elements electromechanical Control circuit appliances GB/T 15241.2 Ergonomic principles related to psychological load Part 2. Design principles GB/T 15706-2012 General principles of machinery safety design risk assessment and risk reduction GB/T 16754-2008 Mechanical safety emergency stop design principles GB/T 16855.1-2018 Safety related parts of machinery safety control system Part 1. General rules for design GB/T 17421.5-2015 General rules for machine tool inspection Part 5. Determination of noise emission GB/T 17454.1 Mechanical Safety Pressure Sensitive Protection Device Part 1. General Rules for Design and Test of Pressure Sensitive Mats and Pressure Sensitive Floors GB/T 17454.2 Mechanical safety pressure-sensitive protection devices Part 2. General rules for design and test of pressure-sensitive edges and pressure-sensitive rods GB/T 17888.1 Safety of machinery to enter the fixed facilities of machinery. Part 1. Access to fixed facilities between two levels of planes select GB/T 17888.2 Safety of machinery entering the fixed installation of machinery. Part 2. Working platform and access GB/T 18209.1 Electrical and mechanical safety instructions, signs and operations Part 1. Requirements for visual, auditory and tactile signals GB/T 18569.1-2001 Safety of machinery reduces the health risks of hazardous substances emitted by machinery. Part 1. Used for Principles and specifications of machinery manufacturers GB/T 18569.2 Machinery safety reduces the health risks of hazardous substances emitted by machinery. Part 2. Generate verification procedures Ordered methodology GB/T 18717.1 Ergonomic design for machine safety Part 1. Principles for determining the size of the opening of the whole body into the machine GB/T 18717.2 Ergonomic design for machine safety Part 2. Determination of the size of the opening of the human body part into the machine in principle ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31301.7-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31301.7-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31301.7-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31301.7-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.