GB/T 31101-2023 English PDFUS$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31101-2023: Information technology - Test method of real-time locating system performance Status: Valid GB/T 31101: Historical versions
Basic dataStandard ID: GB/T 31101-2023 (GB/T31101-2023)Description (Translated English): Information technology - Test method of real-time locating system performance Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L70 Classification of International Standard: 35.040 Word Count Estimation: 14,127 Date of Issue: 2023-09-07 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 31101-2014 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 31101-2023: Information technology - Test method of real-time locating system performance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 35.040 CCSL70 National Standards of People's Republic of China Replace GB/T 31101-2014 Information technology real-time positioning system performance testing method Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ Introduction II 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 symbols 1 5 Abbreviations 3 6 Test conditions 3 6.1 Test object 3 6.2 Test environment 3 6.3 Test layout 3 6.4 Others 4 7 Test Method 4 7.1 Positioning accuracy 4 7.2 Positioning accuracy5 7.3 Positioning delay 6 7.4 Floor judgment accuracy 6 7.5 Indoor and outdoor judgment accuracy 7 7.6 Relative position accuracy 7 7.7 Positioning success rate 7 7.8 Movement speed 8 7.9 Coverage8 7.10 Concurrency 8 8 Test Report 9 Reference 10ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 31101-2014 "Information technology automatic identification and data collection technology real-time positioning system performance test "Method", compared with GB/T 31101-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The term "positioning error indicator" is deleted (see 3.1 of the.2014 version); b) Added the terms "circular probability error", "spherical probability error", "static positioning", "dynamic positioning", "positioning accuracy" and "positioning accuracy" (See Chapter 3); c) Added a number of symbols related to static positioning, dynamic positioning, floor judgment, and indoor and outdoor judgment (see Chapter 4); d) Added the abbreviations "RSS" and "UTC" (see Chapter 5); e) Changed the composition of test objects (see 6.1,.2014 version of 6.1); f) Changed the content of "Test Layout" and refined it into "Select Test Scenario", "Build Coordinate System Information", "Build Test Point" and "Deployment Target". "Measurement System" four requirements (see 6.3,.2014 version of 6.3); g) "Others" are added and refined into four elements. "real coordinates", "location data output format", "location update frequency" and "default tolerance" Seek (see 6.4, 6.4 and 6.5 of the.2014 edition); h) The specific contents of "positioning accuracy", "positioning accuracy" and "positioning delay" in the test method have been changed, and "accurate floor judgment" has been added. "rate", "indoor and outdoor judgment accuracy", "relative position accuracy", "positioning success rate", "moving speed", "coverage" and "concurrency", delete In addition to "tag capacity" and "tag direction change" (see Chapter 7, Chapter 7 of the.2014 edition). This document is proposed and coordinated by the National Information Technology Standardization Technical Committee (SAC/TC28). This document was drafted by. Beijing Xihe Technology Co., Ltd., China Electronics Technology Standardization Institute, National Information Center, Chinese Academy of Sciences Computing Technology Research Institute, Baweitong Technology Co., Ltd., Hangzhou Pibo Technology Co., Ltd., Qingyan Information Technology Co., Ltd. (Beijing) Technology Co., Ltd., Beijing Quanji Technology Co., Ltd. Technology Co., Ltd., University of Science and Technology Beijing, Institute of Automation, Chinese Academy of Sciences, Wuhan University, Beijing Maidian Technology Co., Ltd., Beijing Jiaotong University School, Nanjing Wo Xu Communication Technology Co., Ltd., Chengdu Sixianzhi New Technology Co., Ltd., Chongqing University of Posts and Telecommunications, Hangzhou SMIC Microelectronics Co., Ltd. Company, Suzhou Xunxi Electronic Technology Co., Ltd., Xi'an University of Posts and Telecommunications, China Electronics Technology Group Corporation 54th Research Institute, Qingdao Enron IoT Net Technology Co., Ltd., Beijing Jinkun Science and Technology Co., Ltd., China Electronics Technology Group Corporation 22nd Research Institute, Guizhou Longchuang Xingzhi Technology Co., Ltd., Shenzhen Xinhengyang Technology Co., Ltd., Shenzhen Dongfengsheng Technology Co., Ltd., Yantai Dongfang Ruichuangda Electronic Technology Co., Ltd. Co., Ltd., Xiamen Satellite Positioning Application Co., Ltd., Tangshan Qiao Technology Co., Ltd., Shenzhen Wanjiaan IoT Technology Co., Ltd. Co., Ltd., Hunan Xingtian Electronic Technology Co., Ltd., Shenzhen Rhino Intelligence Technology Co., Ltd., National Museum of China, Wenzhou Yanchuangwu Internet Technology Co., Ltd., Yangtze River Delta Research Institute of University of Electronic Science and Technology of China (Quzhou), Chengdu Ruikexun Technology Co., Ltd., Zhengzhou Lianrui Electronic Technology Co., Ltd. Technology Co., Ltd., Beijing Telecom Planning and Design Institute Co., Ltd., and Guangdong Xinshangan IoT Technology Co., Ltd. The main drafters of this document. Zheng Siwei, Zhang Zhang, Yang Hongxu, Ren Yuchen, Wang Wenfeng, Zhang Miao, Tian Xiaochun, Ding Zhenxing, Huan Maosheng, Luo Haiyong, Zhao Fang, Zhuo Changan, Sun Yu, Zhao Ruixiang, Qiu Youbin, Li Yang, Liu Jiaqi, Wang Qu, Song Boxian, Han Maizhi, Liu Yao, Shao Wenhua, Gao Wei, Deng Yuejin, Liu Jingbin, Li Sumin, Gao Ruipeng, Gu Quan, Xu Minglu, Duan Yaoxin, Chen Xiaochu, Liu Xiaowei, Wang Honggang, Jia Haonan, Li Mingzhang, Wu Tong, Huang Songtao, Lin Xiaolong, Wang Peng, Deng Yanggou, Fan Haifeng, Liu Xiaofeng, Lai Zengwei, Chen Hongli, Zhang Nengfeng, Li Xuyong, Zhang Bin, Li Huabiao, Lin Lingpeng, Chen Zhuming, Luo Gangang, Xiao Yan, Ding Jie, Chen Zhaohui. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 31101-2014 in.2014; ---This is the first revision.Introductionmy country released GB/T 31101 in.2014, which stipulates the performance testing requirements and testing methods of real-time positioning systems. but GB/T 31101-2014 only proposes test requirements and test methods for the performance of real-time positioning systems for radio frequency identification positioning technology, but does not It is suitable for real-time positioning systems using other positioning technologies. Standard applications have certain limitations. In view of this, it is necessary to revise and improve GB/T 31101, to adapt to the development of indoor positioning technology and the new needs of real-time positioning system performance testing. This revision of GB/T 31101 takes into account the applicability of different positioning technologies, test scene layout and system performance testing methods. The method has been improved and can provide effective guidance for testing, inspection or certification services of real-time positioning system products. Information technology real-time positioning system performance testing method1 ScopeThis document specifies the test requirements for the performance of real-time positioning systems focusing on indoor navigation and describes its test methods. This document is suitable for testing and evaluating the performance of real-time positioning systems focusing on indoor navigation.2 Normative reference documentsThis document has no normative references.3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 It is a two-dimensional point accuracy distribution measure with the true position of the point to be measured as the center of the circle and the probability of deviation from the center of the circle as a certain value. 3.2 It is a three-dimensional point accuracy distribution measure with the true position of the point to be measured as the center of the sphere and the probability of deviation from the center of the sphere as a certain value. 3.3 static positioning static positioning A positioning terminal that is stationary or almost stationary. [Source. GB/T 19391-2003, 3.32, with modifications] 3.4 dynamic positioningdynamic positioning A kind of positioning when the positioning terminal is in a moving state. The position coordinates of the positioning terminal in motion are solved in time sequence. [Source. GB/T 19391-2003, 3.33, with modifications] 3.5 Positioning accuracy positionprecision Under specified conditions, the degree of consistency between multiple measurement positioning coordinate results. [Source. GB/T 6379.1-2004, 3.12, with modifications] 3.6 positioning accuracy positionaccuracy The degree of consistency between the measurement positioning coordinate results of the point to be measured and the real coordinates. [Source. GB/T 6379.1-2004, 3.6, with modifications]4 symbolsThe following symbols apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31101-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 31101-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31101-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31101-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 31101-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 31101-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
