GB/T 31063-2014 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31063-2014: Extractables in aqueous autoclavates for pharmaceutical closures of butyl rubber
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31063-2014	439	Add to Cart	4 days	Extractables in aqueous autoclavates for pharmaceutical closures of butyl rubber	Valid

Similar standards

GB/T 35858   GB/T 24131.1   GB/T 33324   GB/T 18396   GB/T 45596   GB/T 15340   

Basic data

Standard ID: GB/T 31063-2014 (GB/T31063-2014)
Description (Translated English): Extractables in aqueous autoclavates for pharmaceutical closures of butyl rubber
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Classification of International Standard: 83.140.01
Word Count Estimation: 19,178
Date of Issue: 12/12/2014
Date of Implementation: 6/1/2015
Quoted Standard: ISO 8362-2; ISO 8362-5; ISO 8536-2; ISO 8536-6
Adopted Standard: ISO 8871-1-2003, MOD
Regulation (derived from): National Standards Bulletin 2014 No. 30
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies requirements and test methods for the chemical to the butyl rubber as the main material made of cork pharmaceutical aqueous effluent of high pressure. Performance requirements of this standard are the minimum requirements for medic

GB/T 31063-2014: Extractables in aqueous autoclavates for pharmaceutical closures of butyl rubber

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Extracables in aqueous autoclavates for pharmaceutical closures of butyl rubber ICS 83.140.01 G40 National Standards of People's Republic of China Medicinal butyl rubber stoppers high pressure aqueous effluent (ISO 8871-1.2003, Elastomericpartsforparenteralsandfordevicesfor pharmaceuticaluse-Part 1. Extractablesinaqueousautoclavates, MOD) Issued on. 2014-12-22 2015-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted Law Amendment uses ISO 8871-1.2003 "parenteral pharmaceutical equipment elasticized Part 1. High Aqueous effluent. " This standard and ISO 8871-1.2003 and the technical differences for the following reasons. --- On the scope of the present standard technical differences have been adjusted in order to adapt to China's technical conditions, adjust the concentrated reflection In Chapter 1, "scope", the specific adjustments are as follows. • The ISO 8871-1.2003 1.1 "This standard specifies the classification procedure elastomer, elastomer primary packaging and for Parenteral preparations are in direct contact with medical equipment, including aqueous formulations must be dissolved before use and dry formulations. This standard specifies a series of chemical assessment by measuring the high-pressure water extract than the test methods (see section 4) and describes the use of elastomers in various fields. Elastomer dimensions and features in the relevant international standards Specified. This standard specifies performance requirements for the minimum requirements. This standard specifies with butyl rubber as the main "to" Chemical requirements and test methods for high-pressure water-soluble pharmaceutical stoppers made of a material substance. Performance requirements of this standard are small Minimum requirements based pharmaceutical rubber stopper (hereinafter referred to as cork) high pressure aqueous effluents. "(See 1.1); • Remove the ISO 8871-1.2003 1.2 "This standard applies to the provisions of Chapter 3 types of elastomers, however, the first 3 Provisions and equipment chapter lists the specific requirements set out in the relevant international standards. Disposable syringes elastomer is not Within the scope of this standard because they have no contact with for a long time and injectable formulations "; • The ISO 8871-1.2003 1.3 "preliminary compatibility studies must be conducted before a final determination can be used, but This standard does not step provisions of compatibility studies. "To" This standard does not agents with cork and predetermined rules Capacitive research procedures. "(See 1.2); • Added "This standard applies to medicinal butyl rubber stoppers." (See 1.3). --- On normative references, this standard has been adjusted with a technical difference, normative references removed with butyl rubber Medicinal plastic stoppers irrelevant references, focus adjustments are reflected in Chapter 2, "Normative references", the specific adjustment as follows. • Remove the ISO 11040-2.1994 "prefilled syringes - Part 2. Dental local anesthetic sleeve plugs and disks'; • Remove the ISO 11040-5.2001 "prefilled syringes - Part 5. Vascular syringe stopper." --- On the classification, according to the actual situation of domestic medicinal butyl rubber stopper, and remove the medicinal butyl rubber stoppers and independent product division Class, focus adjustments are reflected in Chapter 3, "classification", specific adjustments are as follows. • Remove the category "Pre-filled syringes (see ISO 11040-2, ISO 11040-5); • Remove the category "medical instrument with an elastic member (including gloves and probe)"; • The "freeze-dried product elastomer (see ISO 8362-5, ISO 8536-6)" was changed to "butyl rubber lyophilized antibiotic bottle Plug (see ISO 8362-5), butyl rubber stopper infusion lyophilized preparation (see ISO 8536-6) "(see Chapter 3). --- On request, because this standard only requires that the chemical properties of medicinal butyl rubber stoppers requirements, test methods specified in the autoclave Processing method, this standard has been adjusted technical differences, focus adjustments are reflected in Chapter 4, "requirements", specifically tune Whole as follows. • Remove the ISO 8871-1.2003 4.1; • Remove the ISO 8871-1.2003 in 4.2 the classification and type Ⅱ of chemical requirements (see Chapter 4, Table 1). --- On the appendix, because this standard test method for medicinal butyl rubber stoppers high pressure aqueous effluent only the provisions of this standard do with technical Adjustment of differences in the appendix to delete the corresponding content of other elastomers (see A.1.3, A.1.4, A.1.2.1.5, C.3, D.4, H.3). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products latex products Standardization Technical Committee Technical Committee (SAC/TC35/SC4) Centralized. This standard was drafted. Westlands Jiangsu New Medicinal Materials Co., Ltd., Shenzhen City Medical Device Testing, Zhejiang Quality Inspection Bureau Graduate School, Jiangyin Exit Inspection and Quarantine, National Latex Products Quality Supervision and Inspection Center, China Zhuzhou Chemical Industry Research and Design Institute of rubber. The main drafters of this standard. Hua Yimin, Liu Hongwei, Meng Ju E, Zhu Yinhua, Gu Pengfei, Wang Wei, Zhou Jie, Shen, Zhao New, Zhu Yingying, East is high, Zhang, Deng Zhi, Xie Dongli. Medicinal butyl rubber stoppers high pressure aqueous effluent

1 Scope

1.1 standard specifies requirements and test methods for the chemical to the butyl rubber as the main material made of high-pressure water-soluble pharmaceutical stoppers effluents. this Performance standard requirements are minimum requirements medicinal butyl rubber stopper (hereinafter referred to as cork) high pressure aqueous effluents. Compatibility of step with a predetermined stopper agents 1.2 This standard does not specify. 1.3 This standard applies to medicinal butyl rubber stoppers.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Part 2 ISO 8362-2 Injection containers and accessories. injection vials with stoppers (Injectioncontainersandaccessories- Part 2. Closuresforinjectionvials) ISO 8362-5 Part 5 Injection containers and accessories. lyophilized injection bottle stopper (Injectioncontainersandaccesso- ries-Part 5. Freezedryingclosuresforinjectionvials) ISO 8536-2 Infusion equipment - Part 2. Infusion bottle with stopper (Infusionequipmentformedicaluse- Part 2. Closuresforinfusionbottles) ISO 8536-6 Infusion equipment - Part 6. Lyophilized infusion bottles with a stopper (Infusionequipmentformedical use-Part 6. Freezedryingclosuresforinfusionbottles) Category 3 Depending on the product or its supporting equipment used for this standard cork is divided into. --- Antibiotics butyl rubber stopper (see ISO 8362-2); --- Butyl rubber infusion stopper (see ISO 8536-2); --- Lyophilized antibiotics butyl rubber stopper (see ISO 8362-5); --- Lyophilized infusion butyl rubber stopper (see ISO 8536-6).

4 Requirements

Chemical requirements cork high pressure aqueous effluent shall comply with the provisions in Table 1. High pressure chemical corks of aqueous effluent requirements, test methods, see Appendix A ~ Appendix J.

5 Sampling

The number of samples in each delivery stopper randomly selected sample extracts shall comply with the relevant international standards (see Chapter 3). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31063-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31063-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31063-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31063-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.